SI Solo/Pro 2 User manual
Solo / Pro 2
Installation Instructions
24v DC Motors
Thank you for purchasing an SI product. If you have
any questions or need any assistance with your
Solo Pro, we would love to help you.
Technical Support: 512.832.6939
Hours of Support: 7:30am - 5pm CST
screeninnovations.com
Solo Pro 2Solo 2
Please use these QR Codes to access the updated
installation instructions and video tutorials.
CONTENTS
Initial Consideration ................................................... 1
Parts in the Box - 24v DC RTS .................................. 2
Parts in the Box - 24v DC 485 ....................................3
Spacer Blocks and Leveling Shims ........................ 4
Pre-wire 24v DC RTS .................................................. 5
Pre-wire 24v DC 485 ................................................... 6
Power Wire distance chart ........................................ 7
Installation .................................................................... 8 - 16
24v DC RTS
Running ........................................................................17
Programming ..............................................................18 - 19
Pairing another RF Remote ......................................20
24v DC 485
Programming with SIFI .............................................21 - 24
Programming with Limit Setting Tool.....................25 - 27
Programming with USB Programming cable........28- 29
Control with 3rd Party - (Wet Contact) - Fontus...30 - 31
Control with 3rd Party - (Dry Contact) - Fontus 32 - 33
CONTENTS
Control with 3rd Party - (IR) - Fontus ........................... 34 - 35
Control with 3rd Party - (IR) - Fontus
-programming ................................................................. 36 - 37
Control with 3rd Party - Fontus Keypad Application 38 - 39
Control with 3rd Party - Fontus Keypad and
Contact Closure Application.......................................... 40 - 41
Control with 3rd Party - via Serial.................................. 42
Control with 3rd Party - via SIFI..................................... 43 - 44
Control with 3rd Party - via DCT with 12v & IR............45
Mounting Accessories ..................................................... 46
Motor Accessories 24v DC RTS ..................................... 47
Motor Accessories 24v DC 485...................................... 48
Storage and Transport ...................................................... 49 - 50
Care and Maintenance .......................................................51
Troubleshooting ................................................................. 52 - 55
Warranty .............................................................................. 56 - 57
1
INITIAL CONSIDERATIONS
Thank you for your purchase of Solo/Pro 2. The
screen is mountable outdoors, but is not waterproof.
It has not been designed to be run or left in the rain or
condensing humidity. Also avoid water spray, splash
and extreme heat or cold. Protect your Solo/Pro 2 and
you can expect years of quality use.
For a quick install it is recommended you run
appropriate wire to the installation location before
installing the screen. See the Pre-Wire sections for
your particular control method for details.
The Short Throw material is not 100% opaque.
Light sources behind the screen may be visible in
the viewing surface.
Initial Considerations
2
24v DC RTS
PWR Solo/Pro 2 screen
RF Remote
24v DC Power
Supply
Parts in the box
24v DC RTS - Parts in the Box
(2) Ceiling/Wall
Locking brackets
Terminal block
receptacle and bracket
(6) Wood
fasteners
(6) Leveling Shims
3
(6) Wood
fasteners
24v DC Power
Supply
24v DC 485
Additional accessories required for 485 control (pg 38)
Parts in the box
Solo/Pro 2 screen
485
PWR
24v DC 485 - Parts in the Box
(2) Ceiling/Wall
Locking brackets USB Programming Kit
Terminal block
receptacle and bracket
(6) Leveling
Shims
4
Spacer Blocks & Leveling Shims
SPACER BLOCKS & LEVELING
SHIMS
Spacer Blocks are used
to clear an obstruction on
the wall. Connect spacer
block to each wall bracket
before installation.
Leveling Shims are used
if the ceiling or other
mounting surface is out
of level or plumb. Connect
to ceiling brackets before
installation.
Table of contents
Other SI Projection Screen manuals
SI
SI Sensation Series User manual
SI
SI Short Throw Lift Motorized Screen User manual
SI
SI FIXED 5 Series User manual
SI
SI 7 SERIES FIXED User manual
SI
SI Solo 3 675 EXTERNAL INDOOR User manual
SI
SI Dynamic 4 User manual
SI
SI Solo 2 User manual
SI
SI Nano Box User manual
SI
SI 5 SERIES User manual
SI
SI ZERO EDGE PRO User manual
Popular Projection Screen manuals by other brands
FART PRODUKT
FART PRODUKT Standard SCREEN Installation instruction
Draper
Draper E Series Installation & operating instructions
Elite Screens
Elite Screens Elite Tripod Series user guide
Laarhoven
Laarhoven Companion II General assembly instructions
Renogy
Renogy RMS-LFPS-US manual
Da-Lite
Da-Lite ExecutiveElectrol Instruction book
