Shure BRH441M User manual
BRH440M BRH441M
Broadcast Headset
The Shure broadcast headesets, BRH440M and BRH441M, user guide.
Version: 2 (2019-G)
Shure Incorporated
2/12
Table of Contents
BRH440M BRH441MBroadcast Headset 3
LIMITED WARRANTY 3
Service Centers 3
General Description 4
Care and Maintenance 4
Detachable Cable 4
Wearing the Headset 5
Flip-Up Mute Function 6
Specifications 6
Microphone 7
Headphone 8
Accessories 8
Replacement Parts 9
SAFETY PRECAUTIONS 11
CAUTION 12
WARNING 12
WARNING 12
Certifications 12
Shure Incorporated
3/12
BRH440M BRH441M
Broadcast Headset
LIMITED WARRANTY
Shure Incorporated (“Shure”) hereby warrants to the original consumer purchaser only that, except as otherwise specified be
low, this product will be free in normal use of any defects in materials and workmanship for a period of two (2) years from the
consumer’s original date of purchase directly from Shure or from a Shureauthorized reseller.
Any rechargeable batteries contained in or packaged with this product are so warranted for a period of one (1) year from the
consumer’s original date of purchase. However, rechargeable batteries are consumable and their capacity will be reduced over
time based on temperature, amount of time in storage, charging cycles, and other factors; hence reduction in battery capacity
does not constitute a defect in material or workmanship.
At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be
valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re
ceipt directly from Shure or from a Shureauthorized reseller. If Shure elects to replace the defective product, then Shure re
serves the right to replace the defective product with another product of the same model or a model of at least comparable
quality and features in Shure’s sole determination.
If you believe this product is defective within the warranty period, carefully repack the unit, insure it and return it with proof of
purchase, postage prepaid, to Shure Incorporated, Attention: Service Department, at the address below.
Outside of the United States, return the product to your dealer or Authorized Service Center. Addresses are listed on
www.Shure.com or can be obtained by contacting Shure at the address listed below.
This warranty is not transferable. This warranty does not apply in cases of abuse or misuse of the product, use contrary to
Shure’s instruction, ordinary wear and tear, an act of God, negligent use, purchase from a party other than Shure or a Shure
authorized reseller, unauthorized repair, or modification of the product.
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS
CLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE
HEREBY LIMITED TO THE DURATION AND TERMS OF THIS WARRANTY. SHURE ALSO HEREBY DISCLAIMS ALL
LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or conse
quential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
This warranty does not restrict the rights of the consumer mandated under applicable laws.
THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED WITH THIS PROD
UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS
WARRANTY AND INSTEAD SHALL BE COVERED BY THE WARRANTY, IF ANY, PROVIDED IN SHURE’S END USER LI
CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
Service Centers
United States, Canada, Latin America, Caribbean
Shure Incorporated
Attn: Service Department
945 Chaddick Dr.
Wheeling, IL 60090-6449 U.S.A.
Shure Incorporated
4/12
•
•
•
•
•
•
•
•
Europe, Middle East, and Africa
Shure Europe GmbH
Attn: Service
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
IndonesiaService Center Resmi:
Jakarta Hotline (021) 612 6388
Medan (061) 6612550
Surabaya (031) 5032219
Jogjakarta (0274) 371710
Denpasar (0361) 766788
Makasar (0411) 324652
General Description
The BRH441M Broadcast Headset and the BRH440M Broadcast Stereo Headset are developed especially for use in broad
cast and media production. Circumaural ear cups block out background noise, and the dynamic, cardioid microphone delivers
natural, highly intelligible vocal reproduction. Wearable on the left or right side, the flexible boom features a flipup mute func
tion that deactivates the microphone when raised vertically. A detachable cable with unterminated ends enables connection to
a variety of devices, and is easily replaceable for a lifetime of use. The BRH440M features stereo monitoring, while the
BRH441M leaves one ear open to the surrounding environment.
Closed-back, circumaural design provides excellent isolation from background noise
Dynamic microphone delivers natural, highly intelligible vocal reproduction with cardioid polar pattern and frequency re
sponse optimized for communication in loud environments
Ergonomic, lightweight design with adjustable, padded headband for long wearing comfort
Flexible boom microphone pivots 250 degrees for left or right side wear
Flip-up mute function deactivates the microphone when boom is raised vertically
Single-side, detachable cable with unterminated ends (stripped and tinned) enables connection to a variety of devices
User-replaceable cable, earpads, and windscreen for a long product life
Legendary Shure durability to withstand the rigors of professional use
Care and Maintenance
Clean using a soft, damp cloth.
CAUTION: Do not use cleansers that contain solvents. Keep liquid and foreign objects out of the driver openings.
Shure Incorporated
5/12
Detachable Cable
Attach the cable by aligning the arrows and pressing firmly into place until locked.
Pull on the knurled collar to disengage lock and remove cable.
Wearing the Headset
Adjust the headband for a comfortable fit.
Shure Incorporated
6/12
Position the boom so the microphone is within 13 mm (1/2 inch) of the corner of your mouth. To avoid "popping" or
other breath noise, do not place directly in front of mouth.
The boom swivel allows the headset to be worn on either side of your face.
Flip-Up Mute Function
Swivel the boom vertically to the indented position at the headband to mute the microphone.
Shure Incorporated
7/12
Specifications
Net Weight
without cable
BRH440M 376 g (13.26 oz.)
BRH441M 240 g (8.5 oz.)
Packaged Weight
BRH440M 0.8 kg (1.75 lbs)
BRH441M 0.69 kg (1.52 lbs)
Cable
Detachable cable (sold separately)
Environmental Conditions
Operating Temperature 18° to 60° C (0° to 140° F)
Storage Temperature -29° to 74° C (-29° to 165° F)
Relative Humidity 0 to 95%
Microphone
Type
Dynamic, Neodymium magnet, 12.5 mm
Shure Incorporated
8/12
Polar Pattern
Cardioid
Frequency Response
50 to 15,000 Hz
Output Impedance
150 Ω
Sensitivity
at 1 kHz, open circuit voltage
66.5 dBV/Pa* (0.47 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 1 (red wire) with respect to pin 2 (black
wire).
Headphone
Transducer Type
Dynamic, Neodymium magnet
Driver Size
40 mm
Frequency Response
20 to 18,000 Hz
Sensitivity
@ 1 kHz
101 dB SPL/mW
Impedance
@ 1 kHz
300 Ω
Maximum Input Power
1000 mW
Shure Incorporated
9/12
Accessories
Replacement Parts
1 Pair of Replacement Earcup Pads
Windscreen
Temple Pad
Shure Incorporated
10/12
BRH Broadcast Cable Accessories
The following tables describe wiring for BRH detachable cables. All BRH detachable cables contain six conductors with dis
crete termination at the Shure 6-pin connector that plugs into the headset. For pre-terminated cables, conductors (and signal)
are tied to common contacts at the other end of the cable where shown.
Connector Pin Diagram
BCASCA-NXLR4 (male connector)
4-Pin XLR-M Signal Wire 6-Pin Headset Connector
1Mic − Black 2
2Mic + Red 1
3
Mic Ground Shield (uncoated) 3
Headphone Audio Ground White 6
4
Headphone Audio 1 Orange 4
Headphone Audio 2 (boom side) Green 5
BCASCA-NXLR4-FEM (female connector)
4-Pin XLR-F Signal Wire 6-Pin Headset Connector
1
Mic − Black 2
Mic Ground Shield (uncoated) 3
2Mic + Red 1
3Headphone Audio Ground White 6
4 (thru 47uF cap)
Headphone Audio 1 Orange 4
Headphone Audio 2 (boom side) Green 5
This manual suits for next models
1
Table of contents
Other Shure Headset manuals
Shure
Shure TwinPlex TH53-MTQC User manual
Shure
Shure BRH31M User manual
Shure
Shure BRH31M User manual
Shure
Shure IH 6500 User manual
Shure
Shure BRH440M User manual
Shure
Shure IH 6500 User manual
Shure
Shure BRH440M User manual
Shure
Shure BRH31M User manual
Shure
Shure BRH440M User manual
Shure
Shure DuraPlex DH5 User manual
