Shimano EW-7970 Operating instructions

st-7DE0A-003-00

Technical Service lnstructions sl-7DEoA-003

Note

. Secure the cables to the frame so that they will not caught by the tire or

any other parts while pedaling.

. Always be sure to use the TL-EWo1 special tool to remove the cable

. Be careful not to let water get into the terminal.

. The adhesive strength of the cable cover fixing tape is fairly weak so that

the paint on the lrame will not come off together with the tape when the

tape is peeled off at times such as when replacing the cabl6. Once the

tape has come off, replace it with new tape.

IGomponents

. Junction B

. Connectors : 3 places (Front derailleur/rear derailleurilunction)

. Battery bracket

. Junclion cable length : 3 types (7701830/890 mm)

Accessories

. Cable cover (black) :

Long = For Chainstay, Down tube x 3

Short = For Battery / Rear derailleur / Front derailleur x 3

. M5 bolt : L= 105 mm x 1, L= 15 mm x 1

. Cable tie x 1

I Routing Map

Names and locations of each part

Position the battery bracket.

Use the bottle cage mounting bolt to provisionally install the battery

bracket to the bottom of the bottle cage.

Leave a space of 108 mm or more at the end of the battery bracket.

Check that the battery can be inserted and removed while the bottle cage

is installed. Secure the battery bracket with using 2.5mm allen key

Open the clamp, and then install the battery so that ii lollows the groove in

the battery bracket Close the clamp until it clicks into place,

Open the clamp, pull out the battery slightly, and then press the button to

fully remove the battery.

SHtmtrno

SHIMAI'IO AMERICAN CORPORATION

one Holl.nd, lruine, California 92618, U S A Phone: +1-949-951 5003

SHIi/lANO EUROPE B.V, SHIMANO INC.

lndunrieweg 24, 8071 CT Nunspeet, The Neiherlands Phone: +31 141.272222 3-77 oimasu{ho, Sakai ku, 5akai-shi, oraka 590-8517, iapan

* Service lnstructions in further languages are available at : http://techdocs.shimano.com

Please note: speclli€lions are subjed to change for imprcvem€nt without noti@ (English) @ May 2009 by Shimano lnc XBC IZM Prjnted in Japn

Length adjustment examples (Junction B)

lnsert the connector coming lrom junction (A) into the connector coming

from junction (B) so that the triangular marks ( ) on the connectors are

aligned with each other. Push the connectors logether until they connect

with a click. Because of the waterproof structure of the connectors, they do

not lit together rigidly. Be sure to push them together until they connect

with a click

Connector from EW-7970

junction (B)

Connect the electric cable connectors to the terminals of the derailleurs.

lnsert the connectors so that the triangular marks ( ) on the connectors

and the derailleur terminals are aligned with each other

Because o, the waterproof structure of the connectors and terminals, they

do not fit together rigidly Be sure to push them together until they connect

with a click

For rear derailleur

For front derailleur

. When routing the electric cable to

the rear derailleur, be sure to install

it to the bottom of the chainstay to

avoid any interference behveen the

cable and the chain

. Wind any excess length of electric

cable inside junction (B) to adjust

the length Up to a maximum ot 120

mm of excess cable can be wound

in this way.

Once the electric cable has been

routed, secure junction (B) to the

bottom oI the bottom bracket shell

wilh a bolt (length 10.5 mm or 15

mm)

Next, install the cable cover to the

frame. ln order to make sure that the

cable cover is securely installed,

clean the lrame with alcohol or some

other cleaning agent to remove any

grease or other substances before

installing the cable cover Place the

cable cover over the electric cable,

and then attach the cable cover to the

frame

Tighten the bolt of the bottle cage

to secure the battery bracket Use

the accessory cable tie to secure

the battery brackel to the Irame

Connector from S[/-EW79A junction (A)

Provisionally attach the electric cables to the frame with tape

Other Shimano Bicycle Accessories manuals

Shimano

Shimano ULTEGRA SL-BS78 - TECHNICAL Operating instructions

Shimano

Shimano SC-M500 User manual

Shimano

Shimano ST-M410 User manual

Shimano

Shimano BR-C6000 User manual

Shimano

Shimano PD-7900 Operating instructions

Shimano

Shimano ST-7S20 Operating instructions

Shimano

Shimano DURA-ACE ST-7970 User manual

Shimano

Shimano XTR FC-M980 Operating instructions

Shimano

Shimano BR-3300 User manual

Shimano

Shimano CB-E110 Operating instructions

Shimano

Shimano XT series Operating instructions

Shimano

Shimano SW-RS801-S User manual

Shimano

Shimano HP-NX10 Operating instructions

Shimano

Shimano RD-M410 User manual

Shimano

Shimano SORA ST-3400 User manual

Shimano

Shimano DIGI-PACE-WR User manual

Shimano

Shimano XTR Operating instructions

Shimano

Shimano REAR DRIVE SYSTEM - TECHNICAL SERVICE... User manual

Shimano

Shimano Nexus INTER 5E SG-C7000-5V User manual

Shimano

Shimano RD-M662 User manual

Shimano

Shimano TIAGRA FD-4400 - TECHNICAL Operating instructions

Shimano

Shimano Alfine SG-S500 User manual

Shimano

Shimano FD-M661 User manual

Shimano

Shimano FC-M411 Operating instructions

Popular Bicycle Accessories manuals by other brands

Sigma

Sigma BC 16.16 manual

Playcore

Playcore Dero Setbacks installation instructions

VDO Cyclecomputing

VDO Cyclecomputing x3dw instruction manual

Cateye

Cateye RAPID X2 manual

buratti meccanica

buratti meccanica Clorofilla Trail Use and maintenance manual

BOB

BOB YAK owner's manual

APLIC

APLIC 303303/20190717TW012 user manual

SRAM

SRAM AXS BlipBox user manual

Garmin

Garmin EDGE 500 owner's manual

Cateye

Cateye V2C - Quick start manual

KMART

KMART 43115907 instructions

SIGMA SPORT

SIGMA SPORT Buster 2000 manual

NVO Components

NVO Components STEM manual

DAXYS

DAXYS BP188 user manual

XLC

XLC BV-W17 manual

Deda Elementi

Deda Elementi SUPERBOX user manual

Akku Vision

Akku Vision e-bike vision 10046 Manual/Safety Notes

Squire

Squire Inigma user guide