Shell SH916WC User manual
User Guide ▪Guide de l'utilisateur ▪Guía de Usuario
SH916WC
Jump Starter
Démarreur D’Appoint
Arrancador para Automóvil
Portable Power ▪Chargeur Portatif ▪Batería Portátil
Contents
English ---------------------------------------------------------- 1 - 15
Français ----------------------------------------------------- 16 - 30
Español ------------------------------------------------------ 31 - 45
Thank you for choosing this Shell product. Please read the following
instructions and keep them for future reference. This instruction manual
contains important information on safe operation and use. To ensure
long life and performance reliability, please operate and maintain as
per the instructions on this sheet.
For Your Safety
Product Details
LED Battery Level Indicator
12V Jump Start Port Output: USB-A 2
Output: USB-A 1 In/Output: Type-C
Jump Starter
Smart Jumper Cable
Positive Battery Clamp (Red)
Jump Starter Connector (Blue)
Jump Start Status Indicator
BOOST Button
Negative Battery Clamp (Black)
ON/OFF Switch
Micro USB Input Port
LED Flashlight
1
• Designed for vehicles with 7.0 L gasoline and 3.0 L diesel engines
• 10 levels of safety protection
• Integrated with dual USB output ports, Type-C fast charging
input/output port, and 10W wireless charging
• Integrated LED flashlight with 4 light settings: Flashlight, SOS, White
Flood Light, Red Alert Strobe
Package Includes
Product Features
• 1 x Jump Starter • 1 x Smart Jumper Cable
with Safety Protection • 1 x EVA Case
• 1 x Car Charger
(2.4A Output) •1 x USB A to Micro
USB Cable •1 x Type-C to Type-C
USB Cable
• 1 x User Guide • 1 x Product Warranty
Registration Card
2
IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH
USE AND EVERY THREE MONTHS, OR WHEN THE BATTERY LEVEL
FALLS BELOW 50%, TO PROLONG THE INTERNAL BATTERY LIFE.
1. Connect the Type-C cable
provided in this package to the
Type-C port of the jump starter
or connect the Micro USB cable
provided in this package to the
Micro USB port of the jump starter.
Operating Instructions
Charging the Jump Starter
2. Connect the other end of the Type-C cable/Micro USB cable to
a certified USB power adaptor or the car charger that is provided in
this package to begin charging.
Note: Use a PD18W adaptor (sold separately) to quickly recharge the
jump starter. PD 18W adaptor is 3 times faster than a regular charger
(compared with 5W charger).
3
3. The LED will start flashing. The charging level is indicated by the LED
battery level indicator. (Please refer to the following table for
charging status)
4. When charging is completed, the LED indicator will stop flashing.
5. Disconnect the charger from the outlet and remove the charging
cable from the charger and the jump starter.
LED Battery Level
Indicator LED Status
First light flashing
Battery Capacity
0% to 25%
First light solid, and the second
light flashing 25% to 50%
First two lights solid, and the
third light flashing 50% to 75%
First three lights solid, and the
forth light flashing 75% to 100%
All four lights are solid 100% fully charged
4
1. Verify the voltage of the battery.
The information can be found in the vehicle's owner's manual.
2. Make sure the power loads such as headlamps,
air-conditioning and radio are turned off.
3. Press the switch to check the internal battery level to ensure that there
is sufficient battery capacity to jump start a vehicle. (Refer to the
following table for more information)
LED Battery Level
Indicator Battery Capacity Indications
Best condition to jump start
a vehicle
The minimum capacity required
to jump start a vehicle
Recharge the jump starter
before use
Jump Starting Vehicle
Note: Required capacity to jump start a vehicle
Before connecting to the battery
The jump starter is intended to jump start vehicle with gasoline/diesel
engine using a 12V battery.
75% to 100%
50% to 75%
25% to 50%
0% to 25%
5
1. Connect the blue connector of
the jumper cable to the 12V jump
start port of the jump starter.
2. Connect the RED battery clamp
to the positive (+) and the BLACK
battery clamp to the negative (-)
terminal on your vehicle’s battery.
3. A) Once connection is made, the green status indicator light in the
jumper cable will turn solid. Only then can you attempt to jump start
your vehicle. (Do not jump start more than 4 consecutive times)
B) If the green light does not turn solid or the red light is on or beeping
sound is heard, refer to the troubleshooting table for further actions.
4. After the engine starts,
A) Disconnect the battery clamps from the battery terminals and
B) Unplug the jumper cable from the jump starter.
Connecting to the vehicle battery
6
Jump Start Troubleshooting
Green LEDRed LED
Troubleshooting:
Off Jump start the vehicle
Beeping
continuously
1. Low voltage
protection/over
discharge protection.
Voltage of jump
starter is too low.
Charge the jump starter
2. Reversed polarity
protection. Battery
clamps are
connected to the
wrong polarities of
the vehicle battery.
Disconnect the clamps from the
vehicle’s battery. Unplug the jumper
cable from the jump starter.
Follow jump starting vehicle
instructions to jump start the vehicle.
3. Jumper cable not
connected to jump
starter
Connect jumper cable to the jump
starter before connecting the
clamps to the vehicle battery.
Jumper cable signal
Cause Solutions
Solid
Off
Green
LED
Off
Solid
Red
LED Sound
4. High temperature
protection
Disconnect the clamps from the
vehicle’s battery. Unplug the jumper
cable from the jump starter. Let the
jump starter cool down by putting it
in a cool and ventilated place.
7
*Warning
Use “BOOST” with extreme care. Clamps must be tightly connected to the
correct polarities of the vehicle’s battery before pressing boost button. Spark
proof and other safety protections will be disabled after pressing boost
button. This mode generates very high current. Sparks will generate when
clamps touch or are connected to each other. It may cause damage to the
product and the vehicle’s electrical system if not used properly. Seek
professional assistance if you are not sure about using this mode.
1. Connect your portable device with one end of the correct USB cable,
and insert the other end to one of the output ports (USB-A 1, USB-A 2 or
Type-C port) of the jump starter. (Note: connect the USB PD compatible
device to Type-C port for fast charging. )
Jumper cable signal
Cause Solutions
Sound
Off Jump started 4
consecutive times
within 10 minutes
Do not jump start more than 4 times.
Disconnect the clamps from the
vehicle's battery. Unplug the
jumper cable from the jump starter.
Consult a mechanic.
Beeping
with
intervals
Over-current
protection/
short- circuit
protection
Disconnect the jump starter and
jumper cable from the vehicle.
Wait 30 seconds. Follow jump
starting vehicle instructions to
jump start the vehicle.
Off
Green
LED
Flashing
Off
Flashing
Red
LED
Flashing
Flashing
Off
1. Clamps are not
connected to the
vehicle battery
Make sure the clamps are securely
connected to the correct polarities
of the vehicle’s battery.
2. Vehicle’s battery
voltage is too low or
cannot be detected
Make sure the clamps are securely
connected to the correct polarities
of the vehicle’s battery.
Press “BOOST” on the jumper cable.
Solid green LED light will turn on.
Jump start the vehicle.
*seeing warning below
Charging Portable Devices
8
Table of contents
Languages:
Other Shell Automobile Accessories manuals
Shell
Shell NewMotion Business Pro 2.1 User manual
Shell
Shell newmotion Home Advanced Edition 7 User manual
Shell
Shell newmotion Home Advanced Edition 7 User manual
Shell
Shell Recharge Basic User manual
Shell
Shell NewMotion Home Advanced 2.1 User manual
Shell
Shell NewMotion Home Advanced 2.1 User manual
Shell
Shell NewMotion Business Pro 2.1 User manual
