Sharkoon RGB FLOW User manual

Let the colors flow: The RGB FLOW from Sharkoon presents itself as an elegant yet unobtrusive ATX midi tower

with its tempered glass side panel and black chassis with clear lines. The minimalistic design is intersected by

a stream of colors which flows through two integrated LED strips from the front panel to the side of the case,

providing the built-in hardware with an atmospheric highlight. The RGB FLOW is not just an eye-catcher. With

its mesh element on the front panel, locations for six fans or a radiator and numerous installation possibilities

for data storage, it is also an ideal home for your hardware.

The RGB FLOW is eqipped with addressable LED strips which visually

connect the front and side panel. Both strips are daisy chained and

can be easily operated using the four-port RGB controller which is

integrated in the case. Fourteen illumination modes can be selected

using the case’s reset switch. Alternatively, the LED strips and three

more RGB components can be controlled via a mainboard with

appropriate software and an RGB header with a 5V-D-coded-G or

5V-D-G pin configuration.

GO WITH THE FLOW

The RGB FLOW has a side panel made of tempered glass, behind which the

installed hardware is displayed. The side panel is without obvious fastening

and is attached only to the back of the case with easily removable thumb

screws. In addition, the hardware is put into perspective, illuminated in a

choice of colors thanks to the LED strip at the bottom of the glass panel.

WINDOW WITH

RGB HIGHLIGHT

4-PORT ADDRESSABLE RGB CONTROLLER

MANUAL COLOR CONTROL

The RGB FLOW comes with a pre-installed RGB

controller. This allows up to four addressable LED

components to be controlled and synchronized via the

mainboard software. The controller is connected to the

power supply via a SATA connector and to either a

mainboard 4-pin or 3-pin header for addressable LEDs

with the configuration: 5V-D-coded-G or V-D-G.

The RGB FLOW also has a manual color control function for mainboards which do not have headers for

addressable LED components. With this, the RGB controller is not connected to the mainboard, but rather

connected to the power supply and the reset switch of the PC case. The switch’s reset function is then

replaced with a new function which allows up to fourteen lighting modes to be cycled through and selected,

or, if desired, the lighting can be turned off.

Red Green Blue White Yellow Cyan

Pink

RGB

Mode 1

RGB

Mode 2

RGB

Mode 3

RGB

Mode 4

RGB

Mode 5

RGB

Mode 6

RGB

Mode 7

DI G

VDG

DI G

RESET SW

Addressable RGB LED

Fans/ Strips

Addressable RGB LED

Fans/ Strips

SATA

Mainboard

Addressable

RGB

Pin Header

+5V D

ADD_HEADER

V D G

DI G

RESET SW

SATA

Addressable RGB LED

Fans/ Strips

Addressable RGB LED

Fans/ Strips

The RGB FLOW case, along

with all other Sharkoon

products marked with the

Addressable RGB logo, are

certified for Asus Aura Sync,

MSI Mystic Light Sync, Giga-

byte Fusion and ASRock

Polychrome SYNC. Optionally

available SHARK Blades RGB

fans and strips can also be

easily incorporated into

existing systems.

Sharkoon products marked with the "ADDRESSABLE RGB" logo are

compatible with mainboards which have headers for addressable RGB

LED fans and strips. The headers should have the pin configuration

5V-D-coded-G or 5V-D-G. Examples of these RGB connections from the

most important mainboard manufacturers are shown below. The RGB

pin configuration is independent of manufacturer. However,

the naming and marking of these connections may vary between

manufacturers. For further information concerning compatibility, refer

to the manual of your mainboard, or visit the manufacturer's website.

MSI ASUS ASROCK ASUSGIGABYTE

EASY TO INTEGRATE

HDD/SSD

SSD

SSD SSD

Max. Length

Power Supply: 21.5 cm

Max. Length

Graphics Card: 35 cm

HDD/SSD

SSD SSD

16.5 cm

42.4 cm

48.1 cm

4-Port Addressable RGB Controller

Removable HDD/SSD Cage

Extra-Long Thumbscrew Slots for the

Flexible Positioning of the HDD/SSD Cage

Stable Case Feet

Removable Dust Filters

COMPACT DESIGN

WITH POWER SUPPLY TUNNEL

The RGB FLOW has a compact design

that can cut a fine figure anywhere,

without having to make compromises

in terms of compatibility.

Beneath the LED strip on the front panel, the ATX midi tower is equipped with

a fine mesh grille, ensuring an optimal intake of air which is supplied by the

pre-installed 120 mm fan. If desired, five more fans can be installed within the

case. Two additional 120 mm fans will have room behind the front panel, while

one more fan can be installed on the back panel and another two under the

top panel. Despite the compact design, the RGB FLOW also has room for

radiators (incl. fans): 6.4 cm is provided for this behind the front panel and

5.5 cm under the top panel.

OPTIMAL AIRFLOW

2x 120 mm Fans

1x 120 mm Fan Detachable Front Panel

1 x 120 mm Fan

(Pre-Installed)

Optional Installation Possibilities:

If additional space is needed behind the front panel, the HDD/SSD cage can

be quickly and easily repositioned using the extra-long thumbscrew slots on

the bottom of the case. If the cage is not required, it can also be completely

removed, and one 3.5" HDD can be still installed on the bottom panel.

ADAPTABLE HDD/SSD CAGE

Decoupled Mounting for

Noise Reduction from Vibration

Removable HDD/SSD Cage

SPECIFICATIONS

General:

Form Factor: ATX

Expansion Slots: 7

Interior Painting: 

Tool-Free Devices Installation: 

Cable Management System: 

Side Panel: Tempered Glass

Weight: 6.0 kg

Dimensions (L x W x H): 42.4 x 20.6 x 48.1 cm

RGB Compatibility:

Type: Addressable

Port: 4-Port

Manual Control: 14 Modes

Mainboard Compatibility: MSI Mystic Light Sync,

ASUS Aura Sync, Gigabyte

RGB Fusion Ready,

ASRock Polychrome SYNC

RGB Pinout: 5V-D-G & 5V-D-coded-G

I/O:

USB 3.0 (Top): 2

USB 2.0 (Top): 1

Audio (Top): 

Maximum Drive Bays:

3.5": 2

2.5": 6

Fan Configuration:

Front Panel: 1x 120 mm Fan (Pre-Installed)

2x 120 mm Fan (Optional)

Rear Panel: 1x 120 mm Fan (Optional)

Top Panel: 2x 120 mm or 2x 140 mm Fan

(Optional)

Compatibility:

Mainboard: Mini-ITX, Micro-ATX, ATX

Max. Length Graphics Cards: 35 cm

Max. Height CPU Cooler: 16.5 cm

Max. Length Power Supply: 21.5 cm

Max. Height Radiator

incl. Fan (Front): 6.4 cm

Max. Height Radiator

incl. Fan (Top): 5.5 cm

Radiators (Optional): Up to 360 mm (Front Panel)

Up to 280 mm (Top Panel)

Package Contents:

RGB FLOW

Accessory Set

Manual

www.sharkoon.com

Table of contents

Other Sharkoon Computer Accessories manuals

Sharkoon

Sharkoon TG5 RGB User manual

Sharkoon

Sharkoon RUSH POWER M User manual

Sharkoon

Sharkoon SCORPIO 1000 User manual

Sharkoon

Sharkoon ELITE SHARK CA300T User manual

Sharkoon

Sharkoon Bandit User manual

Sharkoon

Sharkoon 8-BAY RA ID STATION User manual

Sharkoon

Sharkoon VG7 User manual

Sharkoon

Sharkoon VAYA User manual

Sharkoon

Sharkoon VG6 Series User manual

Sharkoon

Sharkoon Skiller SGC1 User manual

Sharkoon

Sharkoon RGB Slider User manual

Sharkoon

Sharkoon MS140 User manual

Popular Computer Accessories manuals by other brands

Motorola

Motorola ATRIX user guide

HP USB Media Docking Station specification

Cherry

Cherry B.UNLIMITED 3.0 user manual

Logitech

Logitech IO2 user manual

ARM

ARM DSTREAM-ST Getting started guide

Bartec

Bartec TC 7 Series user guide

Philips

Philips SPC3540 Specifications

Logitech

Logitech mk220 user manual

SilverStone

SilverStone LC02 manual

Flexispot

Flexispot ML2B installation guide

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 user manual

Adam Equipment

Adam Equipment RS-485 manual 

Vivo

Vivo MOUNT-KB05-4DW instruction manual

Kvaser

Kvaser Memorator Professional user guide

DRC

DRC D-Imaging user manual

Sven

Sven Base 305 сombo instructions

Hama

Hama 108310 Operating instruction

SpeechWare

SpeechWare FlexyMike FMK03 user manual