Hamlet UNIVERSAL COVER 101 KBT2 User manual
UNIVERSAL COVER 101 KBT2
Universal Cover with Removable Bluetooth
Keyboard for 10.1” Tablet PC
USER MANUAL
XPADCV101KBT2
www.hamletcom.com
2
Dear Customer,
thanks for choosing an Hamlet product. Please carefully
follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to
dispose of it in an environmentally friendly way, by
putting it in the separate bins for electrical/electronic waste, or to
bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and
components in compliance with RoHS Directive 2011/65/EU,
WEEE Directive 2002/96/CE, 2003/108/CE Italian Legislative
Decree 2005/151 and RTTE directive 2014/53/EU for the following
standards:
EN 60950
ETSI EN 301 489
ETSI EN 300 328
CE Mark Warning
This is a Class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
The complete CE declaration of conformity of the product can be
the product code and the documentation.
The information on the importer for your country are available in the
“About us” section of the Hamlet website at www.hamletcom.com.
3
Introduction
Hamlet Universal Cover 101 KBT2 is a practical protective case
designed for 10.1" Tablet PC, equipped with wireless Bluetooth
keyboard. This cover enables you to use your Tablet PC in an
upright position with the ideal angle for comfortable typing and
maximum ease of use, while protecting your device from scratches
and shock. The Tablet PC is secured to the cover by special clips
which allow free access to the buttons and side ports. The
removable Bluetooth keyboard can be easily detached from the
cover thanks to the magnetic clips. Closing takes place through a
magnetic flap. Equipped with a USB cable for charging the
keyboard battery.
Features
•Universal cover with stand for 10.1” Tablet PC
•Removable Bluetooth keyboard with rechargeable lithium
battery
•Bluetooth interface version 3.0
•Operating range up to 10 meters
•International QWERTY layout
•Micro USB port for recharging
•Status LED indicators
•Standby: 40 days
•Charging time: 3-4 hours
•ON/OFF switch
Package contents
•Universal keyboard case
•USB charging cable
•User manual
System requirements
•Tablet PC with Bluetooth connection
•Android 4.1 or above, iOS 6 or above operating system
4
Keyboard layout
The removable Bluetooth keyboard has an international QWERTY
layout based on English language.
In the case of using a system with a different language, it could be
necessary to set the keyboard layout to English (US) so that
special characters typed on keyboard appear correctly on screen.
Important Note
Multimedia keys such as brightness, volume and playback may
work on some devices only.
Buttons and LED indicators
1. Caps lock indicator
2. Bluetooth indicator
3. Charging indicator
4. Battery power indicator
5. Bluetooth pairing button
6. ON/OFF power switch
7. Micro USB port
5
Installation and use
The following steps refer to tablets with Android system. For other
types of tablet, please refer to the instructions for the Bluetooth
connection provided with the product documentation.
Note: It is recommended that you fully charge the battery the first
time you use the keyboard.
Connecting the keyboard to the tablet (Android)
1. Turn on the keyboard moving the power switch to the ON
position (the Power light will turn on for 3 seconds).
2. Enable the Bluetooth function of the tablet you wish to connect
by opening the Settings menu and selecting Bluetooth in the
Wireless & Networks section.
3. Press the Bluetooth pairing button (Connect) on the keyboard
(the Bluetooth indicator will begin to flash).
4. When the tablet detects the keyboard, select Bluetooth 3.0
Keyboard from the list of Bluetooth devices.
5. The system will prompt a random PIN number.
Type in the PIN number on the keyboard and press Enter to
complete the pairing.
6. The keyboard is now successfully connected to the tablet.
Note: If there is no signal for 10 minutes or the connected device is
turned off, the keyboard will go into Standby. Press any key to wake
up the keyboard.
Charging the keyboard
When the battery charge is low, the Power indicator will start
blinking.
1. Plug the small end (micro USB) of the charging cable into the
micro USB port of the keyboard.
2. Plug the other end of the cable into a USB port on your
computer. The Charge indicator will light up.
3. The keyboard is fully charged when the Charge indicator turns
off.
6
Troubleshooting
In case it is impossible to connect the keyboard to your tablet, try
these steps to resolve the problem.
1. Make sure you have the Bluetooth function installed and set up
properly on your tablet. Refer to your tablet’s documentation for
details.
2. Make sure the keyboard is in a range of 10 meters from the
tablet.
3. If the tablet is connected to other Bluetooth devices, you may
need to disconnect some before connecting the keyboard.
4. If you have changed some Bluetooth settings on the tablet, try
to reconnect the keyboard to the tablet.
5. Make sure both batteries of tablet and keyboard are enough
charged.
If you are unable to resolve the problem, contact technical support
through the Hamlet website at hamletcom.com.
Trademarks and changes
All trademarks and company names mentioned in this manual are
used for description purpose only and remain property of their
respective owners.
The material in this document is for information only and subject to
change without notice. Specifications and appearance of the
product are subject to change without prior notice.
Table of contents
Other Hamlet Computer Accessories manuals
