SEWOO LK-B20 User manual
All specifications are subject to change without notice
4” DESKTOP LABEL PRINTER
MODEL : LK-B20
2
Table of Contents
1. Unpacking 3
2. Inspecting the Printer 4
3. Attaching Power Supply 6
4. Hooking Up the Printer and Computer 7
5. Loading the Paper 8
6. Loading Ribbon 10
7. Setting Up the Sensors 10
8. Self Test 13
9. Interface 14
10. Media Roll Size 16
11. Labels 17
12. Tags and Strip with Slots 18
13. Tags and Strip with Black Marks 19
14. Plain Continuous Stock 20
15. Specications 21
16. Command List 23
3
1. Unpacking
Printer Power Cord(1EA)
Power Supply
LabelRibbon
Ribbon Spindle (2EA) Paper Spindle Ribbon Core
CD Manual
4
2. Inspecting the printer
Button
Interface Connectors Power Switch
Upper Cover Knob
Power Connector
Printer Head
Notch Sensor
Head Release Lever
Moving Paper Sensor
Paper width Guide
5
Open the upper cover by pushing the knob in
the direction of the arrow
Make sure to be careful of the HOT head
Opening the printer
Make sure you hear the closing sound of the
paper upper guide.
Close the upper cover and make sure you hear
the closing sound of the upper cover.
Closing the paper upper guide Closing the upper cover
6
1 2
34
Check the specification of the AC power cord
if it is correct with your power system
Turn off the power of the printer and connect
the power supply to the printer
Connect the AC power cord to the power supply Insert a plug into the outlet
3. Attaching Power Supply
220VAC
115VAC
7
Make sure the printer is turned off then connect the printer to the PC
4. Hooking Up the printer and computer
USB
Serial or Ethernet (Option)
Parallel
-Computer-
-Printer-
8
1 2
34
Turn off the printer and open the upper cover by
pushing the in the direction of the arrow.
Open the paper width guide by pushing it to the
right & left sides.
5. Loading the Paper
Rise up the paper upper guide by pulling the
head release lever
Pull out one of the adjustable width tabs.
Insert a paper roll replace the tab and center.
Paper Fixing Tap
9
5 6
78
Adjust the paper width guide to meet the paper
width
Push the head stopper release lever in the
direction of the arrow until the paper upper
guide comes down.
Close the upper cover and make sure you hear
the closing sound of the upper cover.
Insert paper roll into the printer
Other manuals for LK-B20
1
Table of contents
Other SEWOO Label Maker manuals
