DIGITAL WEIGHING INDICATOR
SI 4000
8
3-5-1. Status Lamp (ANNUNCIATORS) : “▼” Lamp is “ON”.
Steady When the weight is Steady, “▼” Lamp is turn on.
Zero
When the current weight is Zero, “▼” Lamp is turn on.
(Displayed weight is Zero, “▼” Lamp is turn on.)
Tare
Tare function is set, “▼” Lamp is turn on.
(Tare Reset Æ“▼” Lamp is turn off.)
Gross
When “Gross Weight display mode”, Lamp is “ON”
(Under “TARE” Setting mode, only)
Auto When “Automatic Print Mode” setting, Lamp is “ON”
Print When “Print” key input, Lamp is “ON”.
Comm.
When indicator transfers or receives data from other devices, “▼” Lamp is
turn on. (If the “▼” is off although there is some data transference, please
check communication settings).
3-5-2. Key Operation
Make Weight value as Zero.
Under F08, you can set the Zero key operation range, as 2%, or 5%,
or 10%, or 20% of Max. Capacity.
※Under “Tare” key input, Zero key will not be activate within
operation range.
Make Weight value as Zero, including Tare Weight.
Under F09, you can set the Tare key operation range, as 10%, 20%,
50%, or 100% of Max. Capacity.
Whenever pressing “Tare” key, you can set the Tare continuously.※
TARE RESET
1. Remove the Set TARE function.
- If you press this key, TARE set value will be removed and display
gross weight.
FUNCTION KEY
1. “F-TEST” Mode Entrance : Press “F” key for 5sec.
2. Under “F-function Mode”, Move to next Function or move to
certain function No.(Press function No. and press “F” key)
3. Function key (Refer “Function keys”)
Hold the Weight display when indicator detects “Peak Hold”, or
“Sample Hold”.
※You can select “Hold” function on F10.
