Sermatec SMT-100kWh User manual

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 1 -

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 1 -

Contents

1 About this manual............................................................................- 1 -

1.1 Preface.................................................................................. - 1 -

1.2 Model definition................................................................... - 1 -

1.3 Applicable personnel............................................................ - 1 -

1.4 Manual Use........................................................................... - 1 -

1.5 Symbol usage........................................................................ - 2 -

2 Safety instructions............................................................................- 4 -

2.1 Safety instructions................................................................ - 4 -

2.2 Precautions during operation...............................................- 5 -

3 Product description..........................................................................- 9 -

3.1 System Introduction..............................................................- 9 -

3.2 Composition of Energy Storage System............................. - 10 -

3.3 Product Features.................................................................- 11 -

3.4 Product Appearance........................................................... - 11 -

3.5 Components of the energy storage system........................- 12 -

3.6 Technical parameters..........................................................- 13 -

3.7 Product appearance............................................................- 15 -

4 Site preparation and installation................................................... - 18 -

4.1 Objective............................................................................. - 18 -

4.2 Transport.............................................................................- 18 -

4.3 Carry....................................................................................- 18 -

4.4 Open inspection..................................................................- 19 -

4.5 Installation environment.................................................... - 21 -

4.6 Installation method and space........................................... - 22 -

4.7 Electrical connection...........................................................- 24 -

5 Equipment operation.....................................................................- 28 -

5.1 Peak cutting and valley filling mode...................................- 28 -

5.2 Off grid mode......................................................................- 29 -

5.3 Micro source mode.............................................................- 34 -

6 Trouble clearing..............................................................................- 37 -

7 Routine Maintenance.................................................................... - 41 -

7.1 Security considerations.......................................................- 41 -

7.2 Maintenance work and cycles............................................ - 42 -

8 Cloud System Operations...............................................................- 45 -

8.1 Login page .........................................................................- 45 -

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 2 -

8.2 System homepage...............................................................- 45 -

8.3 Commercial System Home Page.........................................- 46 -

8.4 Electricity Analysis.............................................................. - 46 -

8.5 Energy storage management..............................................- 50 -

8.6 Report Forms...................................................................... - 54 -

8.7 Warning...............................................................................- 57 -

8.8 Personal Centre...................................................................- 58 -

8.9 Configuration Management............................................... - 60 -

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 1 -

1 About this manual

1.1 Preface

Dear customer, thank you very much for using the industrial and

commercial energy storage products developed and produced by

Shanghai Sermatec Energy Technology Co., Ltd. We sincerely hope this

product can meet your needs, and hope you can put forward more

opinions on the performance and function of the product . We will

continue to improve the product quality.

1.2 Model definition

The definitions of the product models involved in this manual are

shown in Figure 1-1:

SMT-100kWh

Nominal maximum system capacity: 100kWh

Power level: 50kW / 100kWh

SMT-100kWh: The maximum output power is 50kW, compatible with

30kW. The nominal capacity of the battery system is 100kWh.

1.3 Applicable personnel

This manual is intended for personnel who operate, maintain, and

perform other tasks on energy storage products. The reader needs

some electrical knowledge and is familiar with the electrical

schematics and the characteristics of electronic components.

1.4 Manual Use

Please read this manual carefully before using this product. Replace

this manual and other materials in the product components and store

them together, and ensure that relevant personnel can easily access

them.

ShanghaiSermatec Energy Technology Co., Ltd.

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 2 -

1.5 Symbol usage

In order to ensure the safety of users and property when using this

product, or to use this product efficiently and optimally, the manual

provides relevant information and highlights it with appropriate

symbols.

The following lists some symbols which may be used in this manual.

Please read them carefully to make better use of this manual.

Danger

"Dangerous" indicates a highly potentially dangerous situation that, if

not avoided, could result in death or serious injury.

Warning

"Warning" indicates a moderate potential hazard, if not avoided, could

lead to death or serious injury.

Caution

"Caution" indicates a low-level potential hazard, if not avoided, could

lead to a situation that could result in moderate or minor injury.

Notes

"Caution" indicates a potentially hazardous situation that, if not

avoided, could result in equipment that may not function properly or

cause property damage.

Please pay attention to the danger warning signs on the body. The

signs include:

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 3 -

Mark

Definition

This mark indicates that there is high voltage inside the

body, and contact may cause danger to the motor.

This mark indicates that the temperature is higher than

the human acceptable range. Do not touch it arbitrarily

to avoid personal injury.

This symbol indicates that this is the protective earth

(PE) terminal, which needs to be firmly grounded to

ensure the safety of the operator.

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 4 -

2 Safety instructions

2.1 Safety instructions

This section describes general safety precautions that need to be

taken into account when operating industrial and commercial energy

storage systems. For the safety instructions in the specific use and

maintenance procedures, please refer to the corresponding chapter

warning instructions.

Danger

Touching contacts or terminals which connected to the power grid or

inside the equipment may cause electric shock to death!

·Do not touch the terminals or conductors connected to the grid

circuit.

·Pay attention to all instructions or safety instructions regarding

connection to the power grid.

Danger

Fatal high voltage inside the product!

·Heed and observe the warning signs on the product.

·Observe the safety precautions listed in this manual and other

related documents of this equipment.

Danger

Damage to the equipment or system may cause electric shock or fire!

·Preliminarily check the equipment for damage or other dangers

before operation.

·Check if other external equipment or circuit connections are safe.

·Confirm that this equipment is in a safe state before operation.

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 5 -

Warning

After maintenance and repair work is completed, the equipment

should be powered in strict accordance with the steps in this manual.

2.2 Precautions during operation

2.2.1 Manual storage

This manual contains important information on the operation of

industrial and commercial energy storage. Please read this manual

carefully before operating industrial and commercial energy storage.

Please operate industrial and commercial energy storage products

strictly in accordance with the description in this manual; otherwise, it

may cause equipment damage, personal injury and property damage.

This manual should be properly kept to ensure that maintenance,

inspection and other operators can obtain it at any time.

2.2.2 Staff requirements

Only professional electricians or qualified personnel can perform

various operations on this product.

The operator should be fully familiar with the composition and

working principle of the entire energy storage system.

The operator should be fully familiar with the relevant standards of

the country / region where the project is located.

2.2.3 Body identification protection

The warning signs on the body of the energy storage product and

inside the cabinet contain important information for safe operation of

the energy storage system. No artificial tearing or damage!

A nameplate is installed inside the front door of the energy storage

product. The nameplate contains important information related to the

product. No artificial tearing or damage!

The primary diagram of the system is installed inside the front door of

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 6 -

the energy storage product. No artificial tearing or damage!

2.2.4 Security warning sign settings

When carrying out operations such as installation, daily maintenance,

and overhaul of industrial and commercial energy storage, in order to

prevent irrelevant personnel from approaching and mishandling or

accidents. Please observe the following:

·Set up warning signs or set up safety warning tapes near the

operation area.

·After maintenance or overhaul operations are completed, be sure

to pull out the cabinet door key and keep it properly.

2.2.5 Requirements for escape routes

To ensure that staff can be evacuated quickly in the event of an

accident, please observe the following:

·In the entire process of maintenance, repair and other operations

of the energy storage system, it is necessary to ensure that the escape

channel is completely unblocked.

·It is strictly forbidden to pile up debris in the escape channel or

occupy the escape channel in any form.

2.2.6 Energy storage battery protection

For energy storage power stations, the voltage between the positive

and negative poles of the energy storage battery pack is very high. If

accidentally touched, there is a risk of electric shock or even death.

Notes

·Make sure the body logo is legible at all times.

·If the body logo is damaged or blurred, it must be replaced

immediately.

SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD

- 7 -

Danger

Fatal high voltage exists between the positive and negative poles of

the energy storage battery pack!

•When maintaining the equipment, ensure that the connection

between the energy storage converter and the energy storage battery

pack is completely disconnected.

•Set up warning signs at the disconnection to ensure that they will

not reconnect accidentally.

2.2.7 live measurement

Danger

There is high voltage in the device. Accidental contact may cause fatal

electric shock. Therefore, when carrying out live measurement, you

should:

•Do protective work (such as wearing insulated gloves, etc.).

•Must be accompanied to ensure personal safety.

2.2.8 Precautions during maintenance or repair

Warning

After both the AC and DC sides of the energy storage system are

disconnected, be sure to wait 15 minutes before opening the rear

door to perform maintenance or repairs on the power distribution

part.

By performing a shutdown operation, the energy storage system has

been smoothly taken out of operation.

Also note the following:

•Ensure that the energy storage system cannot be accidentally

re-powered on.

•Use a multi-meter to ensure that the AC side of the energy storage

system is completely de-energized.

•Perform necessary grounding and short-circuit connections.

Table of contents

Other Sermatec Storage manuals

Sermatec

Sermatec HV5120 User manual

Sermatec

Sermatec LV3584 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide