Sena SMH5-FM User manual

User’s Guide
www.sena.com
SMH5 FM
Bluetooth®Headset & Intercom with
built-in FM tuner for Scooters and
Motorcycles

SMH5-FM
© 1998-2016 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice.
Sena™is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. PRISM™, 20S™, 3S™, SMH10™, SMH10R™,
SMH5™, SMH5-FM™, SMH3™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, EXPAND™, Bluetooth Pack for
GoPro®are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not afliated with Woodman
Labs. The Sena Bluetooth Pack for GoPro®is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the
GoPro®Hero3 allowing for Bluetooth capabilities.
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod
touch are the registered trademark of Apple Inc. Zumo™is a trademark of Garmin Ltd. or its subsidiaries. TomTom™is the trademark or registered
trademark owned by TomTom International B.V. Other trademarks and trade names are those of their respective owners.

English
SMH5-FM
CONTENTS
1. INTRODUCTION ....................................................................................5
2. PACKAGE CONTENTS .........................................................................6
3.
INSTALLING THE SMH5-FM ON YOUR HELMET .......................................7
4. POWERING ON/OFF AND CHARGING ..............................................10
4.1 Powering On ..................................................................................... 10
4.2 Powering Off...................................................................................... 10
4.3 Charging ........................................................................................... 10
4.4 Low Battery Warning......................................................................... 11
5. CHECKING THE BATTERY LEVEL.....................................................11
5.1 LED Indicator .................................................................................... 11
5.2 Voice Prompt Indicator...................................................................... 11
6. PAIRING THE SMH5-FM WITH BLUETOOTH DEVICES ...................12
6.1 Mobile Phone Pairing ........................................................................ 12
6.2 Bluetooth Stereo Device Pairing ....................................................... 13
6.3 Bluetooth GPS Navigation Pairing .................................................... 13
7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR
HANDSFREE .......................................................................................15
7.1 A2DP Stereo Music Only................................................................... 15
7.2 HFP for Phone Call Only ................................................................... 15
8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM
CONVERSATION.................................................................................16
9. PAIRING WITH OTHER SENA HEADSET MODELS FOR
INTERCOM CONVERSATION.............................................................17
10. SMH5-FM CONFIGURATION SETTING ............................................18
10.1 Assigning Speed Dial ...................................................................... 18
10.2 Enabling/Disabling RDS AF .............................................................. 19
10.3 Enabling/Disabling Voice Activated Phone Answering .......................... 20
10.4 Enabling/Disabling Voice Prompts.................................................... 20
10.5 Enabling/Disabling Sidetone............................................................. 20
10.6 Enabling/Disabling Advanced Noise Control™ ................................ 20
10.7 Delete all Bluetooth Pairing Information ........................................... 21
10.8 Exit Voice Conguration Menu ......................................................... 21
11. USING THE SMH5-FM .......................................................................22
11.1 Volume Adjustment ........................................................................... 22
11.2 Mobile Phone Call Making and Answering ....................................... 22
11.3 Speed Dialing ................................................................................... 23
11.4 Intercom Conversation...................................................................... 24
11.5 Intercom and Mobile Phone Call....................................................... 24
11.6 Intercom Failure ................................................................................ 25
11.7 Intercom Reconnection..................................................................... 25
11.8 FM Radio........................................................................................... 25
11.9 Stereo Music ..................................................................................... 27

SMH5-FM
4
11.10 Function Priority ............................................................................... 28
11.11 Music Sharing.................................................................................. 28
11.12 Reset to Factory Default Settings .................................................... 29
11.13 Fault Reset....................................................................................... 29
12. UNIVERSAL INTERCOM....................................................................30
12.1 Universal Intercom Pairing................................................................ 30
12.2 Two-way Universal Intercom ............................................................. 30
13. FIRMWARE UPGRADE ......................................................................31
14. OPERATION QUICK REFERENCE ...................................................31
CERTIFICATION AND SAFETY APPROVALS........................................33
• FCC Compliance Statement .................................................................. 33
• FCC RF Exposure Statement ................................................................. 33
• FCC Caution .......................................................................................... 33
• CE Declaration of Conformity ............................................................... 33
• Industry Canada Statement .................................................................. 34
• Bluetooth License ................................................................................. 34
• WEEE (Waste Electrical and Electronic Equipment )............................. 34
SAFETY INFORMATION .........................................................................35
• Product Storage and Management ....................................................... 35
• Product Use ........................................................................................... 35
• Battery ................................................................................................... 36
PRODUCT WARRANTY AND DISCLAIMER...........................................37
• Limited Warranty.................................................................................... 37
• Warranty Exclusions............................................................................... 38
• Warranty Service.................................................................................... 40

English
SMH5-FM
5
Thank you for choosing the Sena SMH5-FM, Bluetooth Stereo
Headset and Intercom for scooters and motorcycles. With the SMH5-
FM, you can call handsfree on your Bluetooth mobile phone, listen
to stereo music or voice instructions of GPS navigation by Bluetooth
wirelessly, and have intercom conversations in full duplex with a
passenger or other riders.
The SMH5-FM is compliant with the Bluetooth Specication 3.0
supporting the following proles: Headset Prole, Hands-Free Prole
(HFP), Advanced Audio Distribution Prole (A2DP), and Audio Video
Remote Control Prole (AVRCP). Please check with the manufacturers
of other devices to determine their compatibility with this headset.
Please read this user’s guide carefully before using the headset.
Also check www.sena.com for the latest version of the user’s guide
and additional information related to Sena Bluetooth products.
1. INTRODUCTION
The SMH5-FM features:
•Bluetooth handsfree for Bluetooth mobile phones
•Bluetooth stereo headset for Bluetooth stereo devices such as MP3
players
•Bluetooth stereo headset for Bluetooth GPS navigations
•Bluetooth intercom up to 700 meters (760 yards)*
•Built-in FM radio tuner with station scan and save function
•Multi-pair Bluetooth intercom to pair with 3 other headsets
•Firmware upgradeable
•Universal Intercom™
•Multipoint Bluetooth for dual mobile phone
•Speed Dialing
•Sidetone
•Advanced Noise Control™
Key Specications:
•Bluetooth 3.0
•Supporting proles: Headset Prole, Hands-Free Prole (HFP),
Advanced Audio Distribution Prole (A2DP), Audio Video Remote
Control Prole (AVRCP)
* in open terrain

SMH5-FM
6
2. PACKAGE CONTENTS
• Headset Main Unit
Jog Dial
LED
•Charging LED
Phone Button
DC Power Charging & Firmware Upgrade Port
• Microphone
- Open-face Helmet Kit
• Clamp Unit
• Helmet Speakers
∙ Attachable Boom Microphone
∙ Hook and Loop Fastener for Boom Microphone
∙ Attachable Boom Microphone Holder
∙ Hook and Loop Fastener for Boom Microphone Holder
∙ Microphone Sponges

English
SMH5-FM
7
3.
INSTALLING THE SMH5-FM ON YOUR HELMET
1. Loosen the two screws on the back plate of the clamp using the
enclosed Allen Wrench. Insert the back plate of the clamp unit
between the internal padding and external shell of the helmet, and
tighten the two screws.
Insert
∙ Wired Microphone
∙ Hook and Loop Fastener for Wired Microphone
- Full-face Helmet Kit
• USB Power & Data Cable
• Glued Surface Mounting Plate
• Hook and Loop Fasteners for Speakers
• Speaker Pads
• Allen Wrench

SMH5-FM
8
2. Attach the headset main unit to the clamp. Insert the main unit in
the clamp until you feel the click that signals a secure attachment.
3. If you have any problem mounting the clamp unit on the helmet for
any reason, you may use the glued surface mounting plate which
can be attached to the external surface of the helmet.
• Locate a proper surface on the helmet to attach the unit, clean
the helmet surface location with a moistened towel, and allow to
dry thoroughly.
• Peel off the cover of the adhesive tape of the plate and attach the
unit on the proper surface of your helmet.
Note:
Sena recommends the clamp unit over the glued surface mounting plate.
Even though the glued surface mounting plate is provided for convenience,
Sena does not assume any responsibility for use of it. Users may have to
use the glued plate at their own risk and responsibility.
4. Place the helmet speakers along with the hook and loop fasteners,
centered to your ear, in the ear pockets of the helmet. If the helmet
has deep ear pockets, you can use the speaker pads to place the
speakers closer to your ears.
5. Attach the boom microphone included in the “Basic Kit” between
the internal padding and the external shell. The boom microphone
should be mounted on the inside surface of the external shell so it
is facing properly towards your mouth. Please make sure that the
microphone is located close to your mouth when you wear the helmet.

English
SMH5-FM
9
You can use the enclosed hook and loop fastener and holder for
the boom microphone to ensure secure placement.
In the case of the wired microphone included in the “Full-face
Helmet Kit”, attach the enclosed hook and loop fastener for wired
microphone to the inside of the chin guard for full-face helmets.
Place the wired microphone on the hook and loop fastener and
attach it to the connector of the speaker cable.
6. When you use the boom microphone included in the “Basic Kit”,
please make sure that the n side of the microphone is facing
outward; away from your lips. You can easily recognize it by
touching the n with your ngers.
n
7. To remove the headset main unit from the clamp, please make
sure to pull out the speaker cable connector from the main unit
rst. Then, remove the main unit from the clamp.

SMH5-FM
10
4. POWERING ON/OFF AND CHARGING
To power on and off the headset, you don’t need to press and hold
any button for several seconds. Just short press the Jog Dial and
the Phone Button simultaneously, and you will get quick on-and-off
convenience.
4.1 Powering On
Press the Jog Dial and the Phone Button at the same time for about
1 second to power on. The blue LED turns on and you will hear
ascending beeps.
4.2 Powering Off
Just short press the Jog Dial and the Phone Button simultaneously,
you don’t need to press and hold for a few seconds. The red LED
turns on for a while until it turns off completely and you will hear
descending beeps.
4.3 Charging
•To charge the SMH5-FM, use the USB Power Cable included in the
package by plugging into computer’s USB port or USB wall charger.
USB wall charger is not included in the package, but you can use
any USB wall charger in the market.*
Note:
Insert the speaker cable connector into the main unit and push the
connector cover down to lock the connector in place.
Other manuals for SMH5-FM
4
Table of contents
Other Sena Headset manuals








































