Seiko V14JA Installer manual
1
•Solar power system
•Overcharge prevention function
•Energy depletion forewarning function
•Quick-start function
•Electronic circuit reset switch
•Train wheel setting device
•Day and date calendar function (Day and date hands)
•Instant setting device for date calendar
•24-hour indication system (24-hour hand)
Cal. V14JA
PARTS CATALOGUE /TECHNICAL GUIDE
(x 1.0)
Movement
Item
[SPECIFICATIONS]
Cal. No. V14JA
Outside diameter ø25.0 mm
24.0 mm between 6 o'clock and 12 o'clock sides
21.3 mm between 3 o'clock and 9 o'clock sides
Movement size Casing diameter
Height
Time indication
Driving system
Additional mechanism
3 hands
3.5 mm (Including the battery portion)
ø24.0 mm
23.3 mm between 6 o'clock and 12 o'clock sides
19.3 mm between 3 o'clock and 9 o'clock sides
Step motor (Load compensated driving pulse type)
0.45 ~ 2.20 V
From full charge to stoppage: Approx. 6 months
Loss/gain
Regulation system
Measuring gate by quartz tester
Solar power system
Titanium-lithium ion rechargeable battery
Power supply
Operating voltage range
Expected life per charge
Jewels 2 jewels
Monthly rate at normal temperature range: less than 20 seconds
Nil
Use 10-second gate.
Rechargeable battery
Power generator
2
PARTS CATALOGUE Cal. V14JA
Disassembling procedures Figs. : 1 →48
Reassembling procedures Figs. : 48 →1
Lubricating: Types of oil Oil quantity
Moebius A Normal quantity
➡➡Please see the remarks on the following pages.
(Lubricating of some parts is shown in “II. REMARKS ON DISASSEMBLING AND REASSEMBLING”)
0022 247
•Battery lead terminal screw (1 pc.)
•Circuit block cover screw (2 pcs.)
•Coil block screw (1 pc.)
0012 354
•Calendar mechanism plate screw
(2 pcs.)
•Hour wheel guard screw (2 pcs.)
2 Minute hand
1 Second hand
3 Hour hand
4 24-hour hand
5 Day hand
6 Date hand
7 Dial
8 Solar cell unit
9 4246 636
Solar cell lead terminal
10 0491 735
Dial washer
3
➡➡Please see the remarks on the following pages.
(Lubricating of some parts is shown in “II. REMARKS ON DISASSEMBLING AND REASSEMBLING”)
PARTS CATALOGUE Cal. V14JA
11 0012 354
Calendar mechanism plate
screw
24 0271 949
Hour wheel
23 0962 909
Second intermediate wheel
for calendar correction
22 0737 909
Calendar corrector setting
wheel
21 0376 966
Hour wheel guard
20 0012 354
Hour wheel guard screw
19 0157 966
24-hour hand wheel
18 1002 966
Day wheel
17 0802 535
Date driving wheel
16 0802 570
Day driving wheel
15 0817 966
Intermediate date wheel
14 0804 570
Date corrector setting wheel
13 0970 966
Date star
12 0839 966
Calendar mechanism plate
4
➡➡Please see the remarks on the following pages.
(Lubricating of some parts is shown in “II. REMARKS ON DISASSEMBLING AND REASSEMBLING”)
PARTS CATALOGUE Cal. V14JA
25 0022 247
Battery lead terminal screw
26 3023 24Y
Rechargeable battery unit
27 0022 247
Circuit block cover screw
29 4000 655
Circuit block
30 0125 907
Train wheel bridge
31 0241 966
Fourth wheel and pinion
28 4457 909
Circuit block cover
32 0231 904
Third wheel and pinion
33 0701 904
Fifth wheel and pinion
34 4146 907
Step rotor
42 0384 890
Yoke
41 0383 891
Setting lever
40 4239 907
Rotor stator
39 4002 907
Coil block
45 0962 890
First intermediate
wheel for calendar
correction
44 0282 890
Clutch wheel
43 Winding stem
47 4268 655
Battery connection (+)
46 0221 966
Center wheel and pinion
48 0100 967
Main plate
35 0261 908
Minute wheel
36 0281 904
Setting wheel
37 0391 890
Train wheel setting lever
38 0022 247
Coil block screw
5
PARTS CATALOGUE Cal. V14JA
Remarks:
8 Solar cell unit (with holding ring for dial) 4020 589
As the solar cell unit is set to the holding ring for dial with glue, its type is determined based on the design
of cases. Check the case number and refer to “PULSAR Casing Parts Catalogue” to choose a corresponding
solar cell unit.
43 Winding stem 0351 892
The type of winding stem is determined based on the design of cases. Check the case number and refer
to “PULSAR Casing Parts Catalogue” to choose a corresponding winding stem.
Solar cell input terminal (–)
I. STRUCTURE OF THE CIRCUIT BLOCK
Input terminal (+) (Also serves as a solar cell input terminal (+).)
Input terminal (–)
C-MOS-IC
Crystal unit
Coil output terminal
TECHNICAL GUIDE Cal. V14JA
•The explanation here is only for the particular points of Cal. V14JA.
•For the repairing, checking and measuring procedures, refer to the “TECHNICAL GUIDE, GENERAL
INSTRUCTIONS”.
6
TECHNICAL GUIDE Cal. V14JA
1〜6 Hands
•How to install
Place the movement directly on a flat
metal plate or the like to install the
hands. In doing so, check that the
spring portion of the circuit block cover
is not pressed down.
II. REMARKS ON DISASSEMBLING AND REASSEMBLING
•Hand installation procedure
1) Install the date and day hands at
desired marker positions,
respectively.
2) Pull out the crown to the second
click, and turn it clockwise until the
date hand shifts.
3) Install the 24-hour hand so that it exactly indicates “24” on the 24-hour scale. In doing so, take care not to
press down on the movement too hard.
4) Install the hour, minute and second hands in the same manner as you do with conventional watches.
5) Check that all the hands are fixed properly in position.
•How to install
7 Dial
Solar cell unit
Guide post at the 4 o‘clock side
Set the notched portions of the dial to
the guide posts at the 4 o‘clock and 10
o‘clock sides of the solar cell unit, and
check that the dial is fixed in position.
Metal plate
Guide post at the 10 o‘clock side
Dial
7
• The solar cell unit is fixed by two hooking portions at the
12 o‘clock and 6 o‘clock sides.
• Insert the tip of a screwdriver into a gap between the
hooking portion and main plate as shown in the
illustration, and then, turn the screwdriver in the direction
of the arrow to release the hooking portion from the
main plate.
TECHNICAL GUIDE Cal. V14JA
•How to remove
•How to install
8 Solar cell unit
Hooking portion
Screwdriver
Main plate
• Set the hooking portions at the 12 o‘clock and 6 o‘clock
sides to the main plate.
• Gently push the solar cell unit above the hooking portions
so that they catch the main plate securely.
Notes: •When installing the solar cell unit, take care not
to damage or deform the solar panel.
•After installing the solar cell unit, check that
both the hooking portions catch the main plate
securely.
•If the solar panel is soiled, gently wipe it with a
soft chamois or the like soaked with alcohol. Main plate
Hooking portion
Push
8
TECHNICAL GUIDE Cal. V14JA
12 Calendar mechanism plate
•Setting position
Refer to the illustration below to check where to install the respective wheels.
•How to install
1) Set the date jumper to the date star, and then have the
hooking portion “A” catch the main plate.
2) Set the day jumper to the day wheel, and then have the
hooking portion “B” catch the main plate.
3) Tighten the two calendar mechanism plate screws.
•Lubricating
Refer to the illustrations above to lubricate the date and day jumpers.
Main plate
Hooking portion “A”
Date jumper
Calendar mechanism plate Day wheel Calendar mechanism plate
Day jumper
Hooking portion “B”
Main plate
Intermediate date wheel
Date corrector setting wheel
Hour wheel
Day driving wheel
Date star
Date driving wheel
24-hour hand wheel
Day wheel
Date star
9
TECHNICAL GUIDE Cal. V14JA
14 Date corrector setting wheel
•How to install
Set the date corrector setting wheel in the direction as
shown in the illustration at right, taking care not to set it
upside down.
•How to install
Set the intermediate date wheel in the direction as shown
in the illustration at right, taking care not to set it upside
down.
15 Intermediate date wheel
16 Day driving wheel
17 Date driving wheel
Cal. V14JA watches use two different driving wheels to
turn the date and day hands. It is necessary, therefore, to
adjust the engagement of the wheels so that the date and
day hands shift properly.
Top
Bottom
(Main plate side)
Bottom
(Main plate side)
Top
Day driving wheel
Date driving wheel
Guide post “A” of the main plate
Guide post “B” of the main plate
Guide post “A” of the main plate
Allowable range of installation Allowable range of installation
Guide post “B” of the main plate
Claw of the date driving wheel Claw of the day driving wheel
•How to install the date and day driving wheels for proper engagement
1) Install the date driving wheel so that its claw overlaps the guide post “A” of the main plate as shown in
the illustration below.
2) While checking that the date driving wheel does not move, install the day driving wheel so that its claw
overlaps the guide post “B” of the main plate as shown in the illustration below.
10
TECHNICAL GUIDE Cal. V14JA
26 Rechargeable battery unit
•How to remove
•Remove the battery lead terminal screw, and then pry
up the “A” portion in the illustration with tweezers to
remove the rechargeable battery unit.
•How to install
•Set the “B” portion of the battery lead terminal to the
guide hole of the main plate, and then push the center
portion of the rechargeable battery unit (the “C” portion
in the illustration) to fix it in position.
Battery lead terminal
Notes: •Be sure to observe the correct polarity of the
rechargeable battery unit. The (–) side has the
lead terminal.
•Handle the rechargeable battery unit with care
so as not to short-circuit its (+) and (–) terminals.
“B” portion
“A” portion
“C” portion
Rechargeable battery unit
30 Train wheel bridge
Refer to the illustrations below to check where to install the respective wheels.
Third wheel and pinion
Step rotor
Fourth wheel and pinion
Fifth wheel and pinion Third wheel and pinion
Minute wheel
Setting wheel
37 Train wheel setting lever
41 Setting lever
42 Yoke
•Setting position
Refer to the illustration at right.
•Setting position
Yoke
Train wheel setting lever
Center wheel and pinion
Clutch wheel
Winding stem
Step rotor
Fifth wheel and pinion Fourth wheel and pinion
Minute wheel
Setting wheel
Setting lever
Table of contents
Other Seiko Accessories manuals
