Sega F355 Challenge Installation and operating instructions

This document has been downloaded from:

The largest resource for amusement machines

documentation on the world wide web!

1st PRINTING JULY 99

MANUAL NO. 999-0832

ADDENDUM TO OWNER’S MANUAL

SEGA ENTERPRISES, INC. USA

UL MODIFICATIONS FOR US.

IMPORTANT INFORMATION INSIDE

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies

that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman-

ship or materials under normal operating conditions. This also certifies that all Interactive Control

Assemblies are to be free from defects in workmanship and materials under normal operating condi-

tions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to

replace or repair the defective part during the warranty period. For Warranty claims, contact your

Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Ne-

glect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other dam-

ages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other

warranties expressed or implied. Under no circumstance shall it extend beyond the period of time

listed above.

HOW TO USE THIS ADDENDUM BOOKLET

This booklet is designed to be used with the original service manual issued with this

game. It contains modifications to both the wiring diagrams and parts assemblies detailed

within the Parts Lists section of your service manual.

“CHECK SIDE” Display

FILTER BOARD

CARTON BOX

601-8928 (1)

Used for transporting the GAME BOARD.

{SUPPLIED WITH YOUR GAME}

DO NOT SHIP GAME BOARD WITHOUT

THIS BOX AS IT MAY DAMAGE THE GAME

BOARD AND VOID YOUR WARRANTY.

THE SHIPMENT METHOD DESCRIBED BELOW ONLY

APPLIES TO ‘MODEL 3/or NAOMI’ BOARDS CONTAINED

IN THE FOLLOWING GAMES:

NO OTHER GAMES BOARDS ARE TO BE SHIPPED IN THE CAGE AS

THEY MAY BE DAMAGED BEYOND REPAIR. PLEASE SHIP THEM

WITHOUT CAGE PROPERLY PROTECTED DURING SHIPPING.

LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2

HARLEY DAVIDSON, RALLY 2, DAYTONA 2, DIRT DEVILS, STARWARS TRILOGY,

BRAVE FIRE FIGHTERS, ZOMBIE’S REVENGE, WORLD SERIES 99’, F355

General Precautions

Follow Instructions: All operating and use instructions should be followed.

Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the

manufacturer’s instructions, and should use only mounting accessories recommended by the manufacturer.

Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces

may cause the product to overturn.

Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product

and to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked

by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

Power Sources:This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your location, consult your local power company. For products intended

to operate from battery power or other sources, refer to the operating instructions.

Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third

(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

Power Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the product.

Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in

a risk of fire or electric shock.

Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the

product.

Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualified service personnel.

Damage Requiring Service:Unplug this product from the wall outlet and refer servicing to qualified service person-

nel under the following conditions:

a) If the power cord or plug is damaged;

b) If liquid has been spilled, or objects have fallen into the product;

c) If the product has been exposed to rain or water;

d) If the product does not operate normally when following the operating instructions. Adjust only those controls that

are explained in the operating instructions. An improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product to its normal operation;

e) If the product has been dropped or damaged in any way;

f) When the product exhibits a distinct change in performance; this indicates a need for service.

Replacement Parts:When replacement parts are required, be sure the service technician has used replacements parts

specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may

result in fire, electric shock, or other hazards.

Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other prod-

ucts (including amplifiers) that produce heat.

Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer’s recommendations.

Do not dispose in an open flame condition, since the battery may explode.

Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such

as benzine, thinner, etc.

Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors

in the places mentioned below:

• Places subject to rain/water leakage, or condensation due to humidity;

• In close proximity to a potential wet area;

• Locations receiving direct sunlight;

• Places close to heating units or hot air;

•In the vicinity of highly inflammable/volatile chemicals or hazardous matter;

• On sloped surfaces;

• In the vicinity of emergency response facilities such as fire exits and fire extinguishers;

• Places subject to any type of violent impact;

• Dusty places.

INSTALLATIONPRECAUTIONS

• Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not over-

load the circuit.

• Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG

rated min. 120 VAC, 7A.

• Moving this unit requires a minimum clearance (of doors, etc.) of 32” (W) by 77” (H).

• For the operation of this machine, secure a minimum area of 32” (W) by 42”(D).

REGULATORY APPROVALS

This game has been tested and found to comply with the Federal Communications Commission Rules.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22.

OPTIONAL DOLLAR BILL ACCEPTOR

THE COIN DOOR ASSEMBLY USED ON F355 Challenge COMES

EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED

WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE

GAME FOR THIS APPLICATION.

THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING

VALIDATORS:

HOLE POSITION#1 MARS 2000 SERIES

(FORWARD-MOST POSITION)

HOLE POSITION#2 MARS 2000 SERIES

DBV45 (JCM)

HOLE POSITION #3 CURRENTLY NOT USED

HOLE POSITION #4 DSI01*

*The back flange on the chute can be removed for hole position #4.

If the flange is not removed, it may interfere with the back of the

cabinent.

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000

series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and

replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered

through Coin Controls or one of Coin Controls authorized distributors. The Part # is 91-4000-01.

The Mars stacker can be obtained through an authorized Mars distributor.

PARTS LIST MODIFICATIONS

ASSY REAR SUB CABI (FRI1-3001)

ITEM NO. PART NO. DESCRIPTION

1 FRI-3002 REAR CABINET

2 FRI-3003 CORNER BRKT L

3 FRI-3004 CORNER BRKT R

4 FRI-1009 CASTER SPACER PLATE

5FRI-3010 FR CONN PNL

6 FRI-3013 FOOT PLATE

7FRI-3022 MAT A

9FRI-3024 SASH A

10 FRI-3025 SASH B

11 FRI-3026 SASH C

12 FRI-3027 SASH D

15 FRI-3033 SP PNL BRKT

16 FRI-3011 HOLDER Z UPPER

17 FRI-3012 HOLDER Z LOWER

18 FRI-3102 REFRECTOR

19 117-5233 PLATE LEG BRACKET BLACK

20 ARC-1006 LEG BRACKET

21 601-5699X LEG ADJUSTER BOLT M16X75

22 253-5457 FL HOLDER

101 601-9377 CASTER FAI=75

102 LOCAL PURCHASE ASSY 20W RED 24"

201 030-000630-SB HEX BLT BLK W/S M6X30

202 000-P00416-W M SCR PH W/FS M4X16

203 030-000630-S HEX BLT W/S M6X30

204 060-F00600 FLT WSHR M6

206 079-000008 SCR NAIL THH STNLS 1.5X16

207 000-T00416-0C M SCR TH CRM M4X16

209 000-P00430-W M SCR PH W/FS M4X30

210 050-H01600 HEX NUT M16

211 000-P00408-S M SCR PH W/S M4X8

212 060-F00400 FLT WSHR M4

ASSY REAR SUB CABI (FRI1-3001)

Other manuals for F355 Challenge

Table of contents

Other Sega Arcade Game Machine manuals

Sega

Sega MISSION IMPOSSIBLE ARCADE Application guide

Sega

Sega Derby Owners Club World Edition Original operating instructions

Sega

Sega ATV Slam User manual

Sega

Sega OutRun2 User manual

Sega

Sega TOP SKATER User manual

Sega

Sega House Of The Dead 3 DELUXE User manual

Sega

Sega SEGA-RaceTV User manual

Sega

Sega SHOOT THIS WIN THIS User manual

Sega

Sega Ford Racing Full Blown Deluxe User manual

Sega

Sega Derby Owners Club World Edition User manual

Sega

Sega D2 Reference manual

Sega

Sega Star Wars Trilogy User manual

Sega

Sega STAR WARS RACER ARCADE Deluxe Version User manual

Sega

Sega Let's Go ISLAND! User manual

Sega

Sega WaveRunner GP User manual

Sega

Sega Royal Rumble Standard Version User manual

Sega

Sega World Series Baseball Super Major League User manual

Sega

Sega Nascar Arcade Mini Standard User manual

Sega

Sega AFTER BURNER CLIMAX User manual

Sega

Sega MARIO & SONIC AT THE OLYMPICS GAMES TOKYO... User manual

Sega

Sega Transformers Human Alliance User manual

Sega

Sega The Maze of the Kings User manual

Sega

Sega AV F-ZERO AX User manual

Sega

Sega 18 Wheeler User manual

Popular Arcade Game Machine manuals by other brands

Universal Space

Universal Space COCONUT BASH Operation manual

Bay-Tek

Bay-Tek EVOLVE installation guide

Global VR

Global VR America's Army Operation & service manual

Atronic

Atronic Cashline installation manual

Universal Space

Universal Space Checky Monkey Operation manual

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Service manual

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Service manual

Family Fun Companies

Family Fun Companies Reactor Parts, Service and Distribution

Universal Space

Universal Space FRUIT MANIA Extreme Operation manual

falgas

falgas CARRUSEL FIESTA user guide

Konami

Konami DanceDanceRevolution Operator's manual

Bay-Tek

Bay-Tek quik drop Service manual

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Operation manual

Adrenaline

Adrenaline Flying Tickets Operation & service manual

Swinks

Swinks Stern Pinball Ghostbusters manual

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Service manual

jakar

jakar SPEED CARS Operator's manual

Carmelli

Carmelli HAT TRICK NG1015H Assembly instructions