Sega 2SPICY User manual

OWNER'S MANUAL

IMPORTANT

•  Before using this product, read this manual carefully to understand the

contents herein stated.

•  After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

OWNER'S MANUAL2SPICY 420-7031-01

Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan

Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584

420-7031-01

1ST PRINTING

TABLE OF CONTENTS

E0-0703 420-7031-01

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS ....................................................................................... i

INTRODUCTION ................................................................................................ iii

1HANDLING PRECAUTIONS ......................................................................... 1

2PRECAUTIONS REGARDING INSTALLATION LOCATION........................ 4

2-1 LIMITATIONS OF USAGE ................................................................................................4

2-2 OPERATION AREA ..........................................................................................................6

3PRECAUTIONS REGARDING PRODUCT OPERATION ............................. 7

3-1 BEFORE OPERATION ....................................................................................................7

3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ..................................9

4PART DESCRIPTIONS................................................................................ 10

5ACCESSORIES ........................................................................................... 11

6ASSEMBLYAND INSTALLATION .............................................................. 13

7PRECAUTIONS WHEN MOVING THE MACHINE...................................... 37

8GAME DESCRIPTION ................................................................................. 39

9EXPLANATION OF TEST AND DATA DISPLAY......................................... 52

9-1 SWITCH UNIT AND COIN METER ................................................................................54

9-2 SYSTEM TEST MODE ...................................................................................................55

9-3 GAME TEST MODE .......................................................................................................56

10 CONTROL UNIT (GUN)............................................................................... 67

11 MONITOR (LCD DISPLAY) ......................................................................... 72

11-1 SAFETY PRECAUTIONS WHEN HANDLING THE MONITOR...................................72

11-2 CLEANING THE SCREEN SURFACE .........................................................................73

11-3 ADJUSTMENT METHOD .............................................................................................74

12 COIN SELECTOR........................................................................................ 77

13 FLUORESCENT LAMP REPLACEMENT................................................... 79

14 PERIODIC INSPECTION ............................................................................. 82

15 TROUBLESHOOTING................................................................................. 84

15-1 TROUBLESHOOTING TABLE.....................................................................................84

15-2 FUSE REPLACEMENT ................................................................................................86

15-3 ERROR DISPLAY ........................................................................................................87

TABLE OF CONTENTS

16 GAME BOARD ............................................................................................ 91

16-1 REMOVING THE LINDBERGH RED ...........................................................................92

16-2 COMPOSITION OF THE GAME BOARD ....................................................................94

17 DESIGN-RELATED PARTS......................................................................... 95

18 PARTS LIST................................................................................................. 96

19 WIRE COLOR CODE TABLE.................................................................... 142

20 WIRING DIAGRAM.................................................................................... 143

TABLE OF CONTENTS

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all the necessary information covering the

general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

"2SPICY."

This manual is intended for the owners, personnel and managers in charge of operation of the product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point of purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word "IMPORTANT" and the symbol below.

Indicates important information that, if ignored, may result in the mishandling of

the product and cause faulty operation or damage to the product.

Sega Amusements U.S.A., Inc.

800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.

TEL: 1-847-364-9787

TOLL FREE: 1-888-877-2669

FAX: 1-847-427-1065

SEGA AMUSEMENTS EUROPE, LTD.

Suite 3a, Oaks House 12-22, West Street, Epsom, Surrey, KT18 7RG, United Kingdom

Telephone: +44 (0) 1372 731820 Facsimile: +44 (0) 1372 731849

e-mail: [email protected] http://www.sega-amusements.co.uk

SPECIFICATIONS

Installation space:

Width: 865.5 mm (34.1 in.)

Depth: 1,664 mm (65.5 in.) <Recommended>

1,290 mm (50.8 in.) <Minimum>

Height: 2,176 mm (85.7 in.)

Weight: Front Cabinet: 128 kg (282.2 lbs) (Including billboard)

Rear Cabinet: 63 kg (138.9 lbs) (Including pedal unit)

Power, maximum current: 470 W, 2.7 A (AC 220 V, 50 Hz Area)

440 W, 2.6 A (AC 220 V, 60 Hz Area)

470 W, 2.6 A (AC 240 V, 50 Hz Area)

Power, current: 445 W, 5.18 A, (Max.) (AC 110 V, 60 Hz; Taiwan)

343 W, 4.05 A, (Min.) (AC 110 V, 60 Hz; Taiwan)

Monitor: 32 Type LCD Monitor

NOTE: The contents herein described are subject to change without notice.

INTRODUCTION

Denition of ‘Site Maintenance Personnel or Other Qualied Individuals’

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Procedures not described in this manual or marked as 'to be carried out by site

maintenance personnel or other qualified professionals' should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that

the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary matters

herein stated can cause personal injury or damage to the machine.

• Before performing work, be sure to turn the power off. Performing the work

without turning the power off can cause an electric shock or short circuit. In the

case work should be performed in the status of power on, this manual always

states to that effect.

• To avoid an electric shock or short circuit, do not plug in or unplug quickly.

• To avoid an electric shock, do not plug in or unplug with a wet hand.

• Donotexposepowercordsorearthwiresonthesurface,(oor,passage,

etc.). If exposed, the power cords and earth wires are susceptible to damage.

Damaged cords and wires can cause an electric shock or short circuit.

• Toavoidcausingareoranelectricshock,donotputthingsonordamagethe

power cords.

• When or after installing the product, do not unnecessarily pull the power cord. If

damaged,thepowercordcancauseareoranelectricshock.

• In case the power cord is damaged, ask for a replacement through where the

productwaspurchasedfromortheofcehereinstated.Usingthecordasis

damagedcancausere,anelectricshockorleakage.

• Be sure to perform grounding appropriately. Inappropriate grounding can

cause an electric shock.

• Besuretousefusesmeetingthespeciedrating.Usingfusesexceedingthe

speciedratingcancauseareoranelectricshock.

• BesurethatconnectionssuchasICBDaremadeproperly.Insufcientinsertion

can cause an electric shock.

• Specicationchanges,removalofequipment,conversionand/oraddition,not

designated by SEGA are not permitted.

-Failuretoobservethismaycauseareoranelectricshock.Non-compliance

withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe

players or the onlookers, or result in injury during play.

- SEGA shall not be held responsible for damage, compensation for damage to

athirdparty,causedbyspecicationchangesnotdesignatedbySEGA.

• If work or parts replacement not indicated in this manual is carried out, an

accident may occur. If it is necessary to carry out work not indicated in this

manual,besuretohaveitdonebytheofceindicatedinthismanualorbythe

point of purchase. Also, please inquire regarding details of the work involved.

• Be sure to perform periodic maintenance inspections herein stated.

HANDLING PRECAUTIONS

• For the IC board circuit inspections, only the logic tester is allowed. The use of a

multiple-purpose tester is not permitted, so be careful in this regard.

• Static electricity from your body may damage some electronics devices on the

IC board. Before handling the IC board, touch a grounded metallic surface so

that the static electricity can be discharged.

• Do not turn the power on and off continuously. Repeatedly turning the power on

and off may cause product malfunction or parts damage.

• Somepartsarenotdesignedandmanufacturedspecicallyforthisgame

machine.Themanufacturersmaydiscontinue,orchangethespecicationsof

such general-purpose parts. If this is the case, SEGA cannot repair or replace a

failed game machine whether or not a warranty period has expired.

HANDLING PRECAUTIONS

CONCERNINGTHESTICKERDISPLAY

This SEGA product has stickers attached describing

the product manufacture No. (Serial No.) and Electrical

Specications. It also has a Sticker describing where to

contact for repair and for purchasing parts.

When inquiring about or asking for repairs, mention

the Serial No. and Name of Machine indicated on

the Sticker. The Serial Number indicates the product

parts depending on the date of production. Also,

improvements and modications might have been made

after the publication of this manual. In order to ensure

you order the correct parts, mention the Serial No. when

contacting the applicable places.

CONCERNINGWARNINGDISPLAYS

This SEGA product has warning displays on stickers,

labels and/or printed instructions adhered/attached to or

incorporated in the places where a potentially hazardous

situation could arise. The warning displays are intended

for accident prevention for customers and for avoiding

hazardous situations relating to maintenance and

servicing work. Some portions of the cabinet contain

high voltage and may cause accidents if touched. When

performing maintenance, be very careful of the warning

displays. It is especially important that any complex

repair and replacement work not mentioned herein

should be performed by those technical personnel who

have knowledge of electricity and technical expertise.

In order to prevent accidents, caution any customer

ignoring the warnings to cease and desist immediately.

440-CS0323-EG

440-WS0164-EG

Serial No. Display

Electrical Specifications Display

Serial No. Display

440-WS0300-EG

440-CS0186-EG

440-WS0165-EG

440-WS0002XEG

440-WS0281-EG

PRECAUTIONS REGARDING INSTALLATION LOCATION

This product is an indoor game machine. Do not install it outside. Even indoors,

avoidinstallinginplacesmentionedbelowsoasnottocauseare,electric

shock,injuryand/ormalfunction.

- Places subject to rain or water leakage, or places subject to high humidity in the

proximityofanindoorswimmingpooland/orshower,etc.

- Places subject to direct sunlight, or places subject to high temperatures in the

proximity of heating units, etc.

-Placeslledwithinammablegasorvicinityofhighlyinammable/volatile

chemicals or hazardous matter.

- Dusty places.

- Sloped surfaces.

- Places subject to any type of violent impact.

-Vicinityofanti-disasterfacilitiessuchasreexitsandreextinguishers.

- Areas where the temperature exceeds the applicable temperature (ambient

temperature) range of 5 to 30 degrees centigrade.

• BesuretochecktheElectricalSpecications.Ensurethatthisproduct

is compatible with the location's power supply, voltage, and frequency

requirements.AplatedescribingElectricalSpecicationsisattachedtothe

product.Non-compliancewiththeElectricalSpecicationscancauseare

and electric shock.

• This product requires a breaker and earth mechanism as part of the location

facilities.Usingtheproductwithoutthesecancauseareandelectricshock.

• Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC

single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).

Non-compliancewiththeElectricalSpecicationscancauseareandelectric

shock.

• Be sure to use an independent power supply equipped with an earth leakage

breaker.Usingapowersupplywithoutanearthleakagebreakercancausean

outbreakofreifapowersurgeoccurs.

• Putting many loads on one electrical outlet can cause generation of heat and a

reresultingfromoverload.

• When using an extension cord, ensure that the cord is rated at 15 A or higher (AC

100V~120Varea)and7Aorhigher(AC220V~240Varea).Usingacord

ratedlowerthanthespeciedratingcancauseareandelectricshock.

2-1 LIMITATIONS OF USAGE

PRECAUTIONS REGARDING INSTALLATION LOCATION

Electricity Consumption:

MAX. 2.7 A (AC 220 V, 50 Hz)

MAX. 2.6 A (AC 220 V, 60 Hz)

MAX. 2.6 A (AC 240 V, 50 Hz)

MAX. 5.18 A (AC 110 V, 60 Hz) <TAIWAN>

Table of contents

Other Sega Arcade Game Machine manuals

Sega

Sega SpongeBob SQUAREPANTS User manual

Sega

Sega DRONE RACING GENESIS User manual

Sega

Sega LINDBERGH RED User manual

Sega

Sega Rambo User manual

Sega

Sega Racing Classic User manual

Sega

Sega Royal Rumble Standard Version User manual

Sega

Sega Future Tone ProjectDIVA Arcade User manual

Sega

Sega THE HOUSE OF THE DEAD III DELUXE User manual

Sega

Sega Clay Challenge User manual

Sega

Sega Nascar Arcade Mini Standard User manual

Sega

Sega UFO CATCHER User manual

Sega

Sega The House Of The Dead 4 29"STD User manual

Sega

Sega Sonic Allstarts User manual

Sega

Sega OutRun2 User manual

Sega

Sega Luigi's Mansion Arcade Application guide

Sega

Sega Virtua Tennis 4 User manual

Sega

Sega MINI DELUXE THE HOUSE OF THE DEAD 4 User manual

Sega

Sega CAPTO CRANE User manual

Sega

Sega World Series Baseball Super Major League User manual

Sega

Sega ATV Slam User manual

Sega

Sega OUTRUN 2 SPECIAL TOURS SDX User manual

Sega

Sega ATV Slam User manual

Sega

Sega Virtua Tennis 2 Troubleshooting guide

Sega

Sega Transformers Human Alliance User manual

Popular Arcade Game Machine manuals by other brands

Universal Space

Universal Space COCONUT BASH Operation manual

Bay-Tek

Bay-Tek EVOLVE installation guide

Global VR

Global VR America's Army Operation & service manual

Atronic

Atronic Cashline installation manual

Universal Space

Universal Space Checky Monkey Operation manual

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Service manual

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Service manual

Family Fun Companies

Family Fun Companies Reactor Parts, Service and Distribution

Universal Space

Universal Space FRUIT MANIA Extreme Operation manual

falgas

falgas CARRUSEL FIESTA user guide

Konami

Konami DanceDanceRevolution Operator's manual

Bay-Tek

Bay-Tek quik drop Service manual

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Operation manual

Adrenaline

Adrenaline Flying Tickets Operation & service manual

Swinks

Swinks Stern Pinball Ghostbusters manual

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Service manual

jakar

jakar SPEED CARS Operator's manual

Carmelli

Carmelli HAT TRICK NG1015H Assembly instructions