Release Version 1.0
1
Precaution and Safety Guidelines
The content of this guideline is to protect the safety of users and prevent property damage.
Please be sure to read this user’s manual thoroughly and use the device correctly.
Warning (If you do not keep any of the below guidelines, you may get seriously injured or
cause somebody’s death.)
■Be sure to install the product after unplugging power cord. Also, do not use many power plugs at the
same time.
- It may cause abnormal heat, fire and electric shock.
■Do not leave the device at any place that water falls or splashes. Also, do not put anything full of water
such as a flower vase on the device.
- It may cause malfunction or fire if liquid goes into the device
■Do not bend the power cord by excessive force. Make sure the power cord is not crushed by heavy
things.
- It may cause fire.
■Do not open the lid arbitrarily as this device has high voltage part inside. Never disassemble, repair or
modify it.
- By abnormal working, it may cause fire, electric shock and personal injury.
■Do not install this product in places with high humidity, dust, or soot.
- It may cause electric shock and fire.
■Do not tug at the power cord section or unplug the power plug with wet hands. If the power cord is
loose, do not plug in.
- There may be a risk of fire and electric shock.
■Always keep the location of the appliance clean during or after installation to prevent dust. Especially
when cleaning the device, wipe it with dry towel and do not use water, thinner or organic solvent.
- It may damage the case of this device, and cause malfunction or electric shock.
■Keep the device in a cool place where doesn’t let direct sunlight. Keep it at a proper temperature and
avoid heating appliances like candle or heater. Also, keep the equipment or tools away from places where
people come and go.
- It may cause fire.
■Pay attention to possible hazards in the workplace, such as wet floor, ungrounded power extension
cables, old power cords and a lack of safety earth. Consult your place of purchase or professional if
problems arise.
- It may cause fire and electric shock.
■Keep the back of the product more than 15cm and the sides more than 5cm from the wall. If you install
the product too close to the wall, it can cause the cable to be bend, compressed too hard or break, as
various external input/ouput ports such as power cords protrude from the back of the product.
- It may cause fire, electric shock and personal injury.
■Concerning the input voltage for operating this device, a voltage range must be within 10% of rated
voltage, and the power outlet must be grounded. Also, do not use a heat source such as a hair dryer, iron
and refrigerator to the same power unit.
- It may cause abnormal fire or electric shock.
