Seagate ST31230N/ND User manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HAWK 2LP Family:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST32430N/ND
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST31230N/ND
Contents
Introduction........................................................... 1
Electromagneticinterference ................................ 1
Before you begin .................................................. 3
Installation overview ............................................. 8
Product Repair...................................................... 10
Shipping ......................................................... 11
Product Repair and return information ........... 11
Technical support services................................... 12
Hawk 2LP family product information ................... 15
Initial set-up information........................................ 17
Drive configuration................................................ 22
Drive installation ................................................... 30
© 1994 Seagate Technology, Inc. All rights reserved
Publication Number: 77767473, Revision B
October 1994
Seagate®,SeagateTechnology®andtheSeagatelogo
areregisteredtrademarksofSeagateTechnology,Inc.
HawkTM, SeaFAXTM, SeaFONETM, SeaTDDTM, and
SeaBOARDTM, are trademarks of Seagate Technol-
ogy, Inc. Other product names are registered trade-
marks or trademarks of their own.
Seagate reserves the right to change, without notice,
product offerings or specifications. No part of this
publication may be reproduced in any form without
written permission of Seagate Technology, Inc.
Hawk 2LP Family Installation Guide, Rev. B 1
_________________________________________________________________________________________________________
Introduction
Thismanualisorganizedtoassistyouintheinstallation
and operation of your Seagate Hawk 2LP Family disc
drive. Family models are listed in Hawk 2LP Family
Product Information section. It also provides informa-
tion to aid in obtaining service for the drive.
Beforeattemptinganyinstallation,pleasereadthrough
all applicable sections of this document, including all
warnings and cautions.
Warning.
This equipment generates,uses,andcanradiateradio
frequency energy and if not installed and used in
accordance with these instructions, may cause inter-
ference to radio communications.
Electromagnetic interference (EMI)
considerations
The drive(s) described herein, as delivered, are de-
signed for system integration and installation into a
suitable enclosure prior to use. As such, the drive(s)
described herein are supplied as a sub-assembly and
arenotsubjecttoSubpartJofPart15oftheFCCRules
2 Hawk 2LP Family Installation Guide, Rev. B
_____________________________________________________________________________________________________________
and Regulations nor the Radio Interference Regula-
tionsoftheCanadianDepartmentofCommunications.
However,theunithasbeentestedusingpropershield-
ing and grounding and found to be compliant with the
ClassAlimitsoftheFCCRulesandtheRegulationsof
the Canadian Department of Communications.
The physical design characteristics of the drive(s)
described herein, serve to minimize EMI radiation
when installed in an enclosure that provides reason-
able shielding. As such, the drive(s) are capable of
meeting the Class B limits of the FCC Rules and the
RegulationsoftheCanadianDepartmentofCommuni-
cations.
Note. Itistheendusers'responsibilitytoassurethat
the drive(s)describedhereinmeettheappro-
priate EMI requirements of their system.
Shielded I/O cables may be required if the
enclosure does not provide adequate shield-
ing.IfI/Ocablesare externaltotheenclosure,
shieldedcablesshouldbeused,withtheshields
grounded to the enclosure and to the host
controller.
Hawk 2LP Family Installation Guide, Rev. B 3
_____________________________________________________________________________________________________________
Before you begin
Verify that the system is switched off and discon-
nected from main power before any installation is
attempted.
Protect yourself, the drive, and your valuable pro-
grams and data by reading the following cautions
and warnings.
•Donottamper withsealed topcover.Doingsovoids
your warranty. The drive contains no user service-
able components. See Product Repair section for
more information.
•Visually inspect the shipping container for any obvi-
ous damage.
•Verifyallpartslistedonshippingbillarereceivedwith
theequipment.Discrepanciesordamage should be
reported to the shipping company.
•Inspectdriveforpossibleshippingdamage.Allclaims
of this type should be filed promptly with the trans-
porterinvolved.Saveoriginalpackingmaterialstobe
used when reshipping.
4Hawk 2LP Family Installation Guide, Rev. B
_____________________________________________________________________________________________________________
•When transporting or shipping a drive or system,
please ensure that they are correctly packed in
original Seagate approved (or equivalent) container
and shipped via an air-ride carrier experienced in
handling computer equipment.
•Donotunpack drivefrom itsstaticshieldedbaguntil
you are ready to install it in the system.
•Always handle the drive by the frame or casting.
•Do not touch Printed Circuit Board (PCB) or the I/O
connector pins.
•Never apply pressure to the PCB or to the drive top
cover
Caution. The circuit assemblies and components
containedinthisequipmentcanbedegraded
or destroyed by Electrostatic Overstress
(EOS) or by Electrostatic Discharge (ESD).
Hawk 2LP Family Installation Guide, Rev. B 5
_____________________________________________________________________________________________________________
Static electrical charges can accumulate
quicklyonpersonnel,clothingandsynthetic
materials. The electrostatic fields due to
these charges when brought in close prox-
imity to susceptible circuit assemblies and
components,canresultindegradedreliabil-
ity or immediate failure of the affected com-
ponent or assembly.
To insure optimum reliable equipment op-
eration, it is required that technical support
personneldischargethemselvesbywearing
a grounding strap around the wrist and be
connected to a grounding terminal while
workingin thevicinity of,and whilehandling
EOS/ESD susceptible assemblies/parts. If
unavailable, ground yourself frequently by
touching the metal chassis of the system
beforehandlinganycomponents(thishelps
onlyifthesystemisconnectedtoaground).
Avoid static-inducing carpeted areas.
This
procedureisespeciallyimportantwhenhan-
dling printed circuit boards (PCB's).
6Hawk 2LP Family Installation Guide, Rev. B
_____________________________________________________________________________________________________________
Safety instructions
1. The disc drive(s) are to be installed in a customer
suppliedenclosurewherethesurroundingairdoes
not exceed 50oC.
2. Four (4) 6-32 UNC-2A screws are required for
installation. Maximum screw length into side of
drive is 0.15 inches (3.81 mm). Maximum screw
length into bottom is 0.20 in. (5.08 mm). Screw
tightening torques is 6.0 lb-in (.675 NM) max with
minimumthreadengagementof0.12in(3.00mm).
3. Thepower requirementsareshown inthe Product
Informationsection.
4. The power supply must satisfy the safety require-
ments for SELV (Safety Extra Low Voltage) cir-
cuits.
5. Service is to be provided by trained Seagate ser-
vice personnel.
6. The incorporation of the disc drives listed in this
guide into a customer enclosure must meet the
appropriate safety requirements of the country in
which it is used (e.g. UL 1950, CAN/CSA-C22.2
No.950-M89, DIN VDE 0805:1993 and EN60950:
1992 (IEC 950). Note
Power must be off when connecting or disconnecting.
Hawk 2LP Family Installation Guide, Rev. B 7
_____________________________________________________________________________________________________________
Sicherheitsanleitung
1. DäsGerätisteinEinbaugerät,vorgesehenfüreine
maximale Umgebungstemperatur von 50oC.
2. Zur Befestigung der Drive werden 4 Schrauben
benötigt (6-32 UNC-2A). Die maximale Länge der
Schrauben in der unteren Seite des Chassis darf
nicht mehr als 0.20 in (5.08 mm) betragen, die in
der Seiten 0.15 in (3.81 mm). Maximalle
Schraubenanziehung von 6.0 in-lb (.675 NM) mit
minimalem Gewindeansperuch .12 in (3.00 mm).
3. DieVersorgungsspannungenwerdeninderSektion
Produkt Information gezeigt.
4. Die Versorgungsspannung muss SELV entspre-
chen.
5. AlleArbeitendürfennurvonausgebildetemSeagate
Service-Personal durchgefürhrt werden.
6. Der Einbau des Drives muss den Anforderungen
gemässDINVDE0805:1993oderEN60950:1992
(IEC 950). Vorsicht
ÁnsehlussoderEntfernungolerGeräteverbindungnur
beiabgeschalteterVersorgungsspannungvornehmen.
8 Hawk 2LP Family Installation Guide, Rev. B
_____________________________________________________________________________________________________________
Installation Overview
Installation of the drive can be divided into distinct
phases. Some of these may not be applicable to all
system installation requirements. Refer to the indi-
vidualdriveinstallationsectionsforspecificinformation
on your drive model.
•Drive configuration: Select those drive features
thatareappropriatetoinstallthedriveinthesystem.
Thisisdonebyinstallingorremovinguserconfigura-
tion jumpers found on the drive PCB.
•Mechanical installation: After setting up the drive
configuration the drive must be mechanically in-
stalledinto the host system and the power and I/O
cables attached. Previously mentioned precautions
should be observed.
•CMOS configuration: SCSI drives should not be
definedintheCMOS.TheSCSIhostadapterusesits
own BIOS to handle the Input/Output procedures.
TheCMOS settingfor SCSI driveis eitherdrivetype
zero, or the no drive installed option.
This manual suits for next models
6
Table of contents
Other Seagate Storage manuals
Seagate
Seagate Constellation ES.3 ST4000NM0033 User manual
Seagate
Seagate ST3146807FC - Cheetah 146.8 GB User manual
Seagate
Seagate ST320014A User manual
Seagate
Seagate Cheetah 10K.7 FC User manual
Seagate
Seagate HAWK 4 ST15230N User manual
Seagate
Seagate FreeAgent Pro User manual
Seagate
Seagate FreeAgent Desktop 750GB User manual
Seagate
Seagate Savvio 10K User manual
Seagate
Seagate ST310014A User manual
Seagate
Seagate ST125N User manual
Seagate
Seagate ST3750641NS User manual
Seagate
Seagate Pulsar.2 ST800FM0022 User manual
Seagate
Seagate FreeAgent GoFlex 1.5TB User manual
Seagate
Seagate STCB4000102 User manual
Seagate
Seagate Cheetah ST318451FC User manual
Seagate
Seagate Innov8 User manual
Seagate
Seagate ST3450802SS User manual
Seagate
Seagate EXOS ST10000NM018G User manual
Seagate
Seagate ST125 System manual
Seagate
Seagate ST500VT001 User manual
