Seagate Medalist Pro 2160N User manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medalist Pro 2160N (ST52160N)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSI Hard Drive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-2 Medalist Pro 2160N, Rev. B
© 1997–1999 Seagate Technology, Inc. All rights reserved.
Publication Number: 32653-001, Rev. B, September 1999
Seagate, Seagate Technology and the Seagate logo are regis-
tered trademarks of Seagate Technology, Inc. Medalist, SeaFAX,
SeaFONE, SeaBOARD and SeaTDD are either trademarks or
registered trademarks of Seagate Technology, Inc. or one of its
subsidiaries. All other trademarks or registered trademarks are
the property of their respective owners.
Medalist Pro 2160N, Rev. B -1
Contents
What you need........................................................................ 1
Before you begin .................................................................... 1
Handling precautions............................................................. 2
SCSI ID jumpers and drive termination................................ 3
Setting the SCSI ID ............................................................ 3
SCSI termination ................................................................ 5
Attaching cables and mounting the drive............................ 7
Configuring your computer................................................. 11
Partitioning and formatting your drive............................... 12
Low level format................................................................ 12
DOS, Windows 95, Windows NT and OS/2...................... 12
Other operating systems................................................... 14
Additional drive options ...................................................... 15
Troubleshooting ................................................................... 17
Drive specifications ............................................................. 23
Glossary................................................................................ 24
Seagate Technology support services............................... 25
Storing and shipping your drive......................................... 32
iii
0 Medalist Pro 2160N, Rev. B
iv
Medalist Pro 2160N, Rev. B 1
What you need
•Straight-edge and Phillips screwdrivers
•Drive mounting screws
•A SCSI interface host adapter
•A 50-pin SCSI interface cable
•An unused drive power cable for your new drive
•A DOS or Windows 95 system setup diskette (Seagate recom-
mends using DOS Version 5.0 or later).
•If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,
you need a mounting adapter or frame kit. Also, you may need
drive mounting rails if your drive bay is not designed for direct
mounting.
Before you begin
•Make sure your computer is turned off before you open the
case.
•Read the handling precautions following and inspect the drive
to make sure that it is not damaged.
•Save your foam-lined Seagatedisc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.
2 Medalist Pro 2160N, Rev. B
Handling precautions
Disc drives are extremely fragile. Do not drop or jar
your drive.
Keep the drive in its antistatic bag until you are
ready to install it.
Protect your drive from static discharge by making
sure you are well grounded before touching the
drive. We recommend wearing a grounded wrist
strap throughout the installation process. Do not
touch the connectors or any part of the printed cir-
cuit board.
Always handle the drive by its edges or frame.
Do not apply pressure or attach labels to the circuit
board or the top of the drive.
Medalist Pro 2160N, Rev. B 3
SCSI ID jumpers and drive termination
Setting the SCSI ID
Your SCSI drive is configured at the factory as SCSI ID 0 (no
jumpers installed). If you are installing only one drive or if this will
be your boot drive, the drive should be configured as SCSI ID 0.
Each device on the SCSI chain must have a unique SCSI ID. If
you are installing a second hard drive, choose the next available
ID. SCSI ID 7 is usually reserved for the SCSI host adapter.
Figure 1 on page 4 shows the jumper settings for SCSI IDs 0
through 7.
4 Medalist Pro 2160N, Rev. B
Figure 1. SCSI ID and termination jumper settings
SCSI ID 1
SCSI ID 2
Terminator
Enabled
SCSI ID 0
SCSI ID 3
SCSI ID 4
SCSI ID 5
SCSI ID 6
SCSI ID 7
Terminator
Disabled
1197531
1210 8 6 4 2
13
14
Medalist Pro 2160N, Rev. B 5
SCSI termination
Figure 2. Termination for internal SCSI devices
Chains of SCSI devices must be terminated at each end of the
cable.
The figure above shows two internal hard drives with the termi-
nation enabled for the SCSI host adapter and the last device on
the cable.
If your new drive is the last device on the SCSI cable, you must
enable termination. Active termination is enabled when there are
no jumpers on pins 11 and 12 of the options jumper block. This
is the default setting.
If your drive is not the last device on the SCSI cable, SCSI termi-
nation must be disabled by placing a jumper on pins 11 and 12.
Internal SCSI device
Internal SCSI device
SCSI Host Adapter
Terminate
Terminate
6 Medalist Pro 2160N, Rev. B
Figure 3. Termination for internal and external SCSI devices
This figure shows a SCSI chain with two internal SCSI devices
and two external SCSI devices. The SCSI devices at the ends of
each cable are terminated.
Note. Some SCSI host adapters should remain terminated
even if they are in the middle of the chain. Also, some
adapters treat the internal and external chains as sepa-
rate logical buses. This means you may need to termi-
nate both the first and last devices on both logical buses
to achieve proper termination. Refer to your computer or
host adapter documentation to see how this is handled in
your system.
Internal SCSI device
Internal SCSI device
External SCSI device
External SCSI device
SCSI Host Adapter
Terminate
Terminate
This manual suits for next models
1
Table of contents
Other Seagate Storage manuals
Seagate
Seagate FreeAgent Desktop 1TB User manual
Seagate
Seagate ST1.2 - Series 8 GB Removable Hard Drive User manual
Seagate
Seagate ST9100828AS - Momentus 5400.3 100 GB Hard... User manual
Seagate
Seagate ST9160511NS - Constellation 7200 160 GB Hard... User manual
Seagate
Seagate FreeAgent Go ST902503FAA2E1-RK User manual
Seagate
Seagate ST340016A User manual
Seagate
Seagate ST1000NX0303 User manual
Seagate
Seagate Enterprise Value ST3000NC002 User manual
Seagate
Seagate WSS NAS SRPS20 Instruction Manual
Seagate
Seagate ST31000322CS - Pipeline HD 1 TB Hard Drive Operating and safety instructions
Seagate
Seagate Momentus Thin 5400-RPM User manual
Seagate
Seagate ST3300655LW - Cheetah 300 GB Hard Drive User manual
Seagate
Seagate SkyHawk AI User manual
Seagate
Seagate MOMENTUS ST91603010AS User manual
Seagate
Seagate ST32000641AS - Barracuda XT 2 TB Hard Drive User manual
Seagate
Seagate Barracuda Series User manual
Seagate
Seagate Barracuda Series User manual
Seagate
Seagate ST9655 Family User manual
Seagate
Seagate Medalist Pro 4520 User manual
Seagate
Seagate ST43401N/ND User manual
