Seagate HAWK 4 Famil User manual
HAWK 4 Family:
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
(Wide Bus)
ST15230W/WD/WC
. . . . . . . . . . . . . . . . . . . . . . .
ST15230DC
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
Installation Guide
Contents
Introduction........................................................... 1
Electromagneticinterference ................................ 1
Before you begin .................................................. 3
Installation overview....................................... 8
Product repair information .................................... 10
Shipping ......................................................... 11
Product repair and return information............. 11
Technical support services............................. 12
Drive specifications............................................... 15
Initial set-up information........................................ 18
Drive configuration................................................ 23
Drive installation ................................................... 33
© 1994 Seagate Technology, Inc. All rights reserved
Publication Number: 77767477, Rev. A
October 1994
Seagate®,SeagateTechnology®andtheSeagatelogo
areregisteredtrademarksofSeagateTechnology,Inc.
HawkTM, SeaFAXTM, SeaFoneTM, SeaTDDTM and
SeaBOARDTM aretrademarksofSeagateTechnology,
Inc.Otherproductnamesareregisteredtrademarksor
trademarks of their own.
Seagate reserves the right to change, without notice,
product offerings of specifications. No part of this
publication may be reproduced in any form without
written permission from Seagate Technology, Inc.
Hawk 4 (Wide) Family Install Guide, Rev. A 1
___________________________________________
Introduction
Beforeattemptinganyinstallation,pleasereadthrough
all applicable sections of this document, including all
warnings and cautions.
Warning. This equipment generates, uses and can
radiate radio frequency energy and if not
installedin accordance with these instruc-
tions,maycauseinterferencetoradiocom-
munications.
Electromagnetic interference (EMI) con-
siderations
The drive(s) described herein, as delivered, are de-
signed for system integration and installation into a
suitable enclosure prior to use. As such, the drive(s)
described herein are supplied as a sub-assembly and
arenotsubjecttoSubpartJofPart15oftheFCCRules
and Regulations nor the Radio Interference Regula-
tionsoftheCanadianDepartmentofCommunications.
However,theunithasbeentestedusingpropershield-
ing and grounding and found to be compliant with the
ClassAlimitsoftheFCCRulesandtheRegulations of
the Canadian Department of Communications.
2 Hawk 4 (Wide) Family Install Guide, Rev. A
___________________________________________
The physical design characteristics of the drive(s)
described herein, serve to minimize EMI radiation
when installed in an enclosure that provides reason-
able shielding. As such, the drive(s) are capable of
meeting the Class B limits of the FCC Rules and the
RegulationsoftheCanadianDepartmentofCommuni-
cations.
Note. It is the end users' responsibility to assure that
the drive(s) described herein meet the appro-
priateEMIrequirementsoftheirsystem.Shielded
I/Ocablesmayberequirediftheenclosuredoes
notprovideadequateshielding. IfI/Ocables are
externaltotheenclosure,shieldedcablesshould
beused, with theshieldsgrounded to theenclo-
sure and to the host controller.
Hawk 4 (Wide) Family Install Guide, Rev. A 3
___________________________________________
Before you begin
Verify that the system is switched off and discon-
nected from main power before any installation is
attempted.
Protect yourself, the drive, and your valuable pro-
grams and data by reading the following cautions
and warnings.
•Donot unpackdrivefrom its staticshielded bag until
you are ready to install it in the system.
•Always handle the drive by the frame or casting.
•Do not touch printed circuit board (PCB) or the I/O
connector pins.
•Never apply pressure to the PCB or to the drive top
cover.
•Donot tamperwithsealed top cover.Doing so voids
your warranty. The drive contains no user service-
able components. See Product Repair section for
moreinformation.
•Visually inspect the shipping container for any obvi-
ous damage.
4 Hawk 4 (Wide) Family Install Guide, Rev. A
___________________________________________
•Inspectdriveforpossibleshippingdamage.Allclaims
of this type should be filed promptly with the trans-
porterinvolved.Saveoriginalpackingmaterialstobe
used when reshipping.
•Verifyallpartslistedonshippingbillarereceivedwith
theequipment.Discrepanciesor damage should be
reported to the shipping company.
•When transporting or shipping a drive or system,
please ensure that they are correctly packed in
original Seagate approved (or equivalent) container
and shipped via an air-ride carrier experienced in
handling computer equipment.
Caution. Thecircuitassembliesandcomponentscon-
tainedinthisequipmentcanbedegradedor
destroyedbyElectrostaticOverstress(EOS)
or by Electrostatic Discharge (ESD).
Static electrical charges can accumulate
quicklyonpersonnel,clothingandsynthetic
materials. The electrostatic fields due to
these charges when brought in close prox-
imity to susceptible circuit assemblies and
components,canresultindegradedreliabil-
ity or immediate failure of the affected com-
ponent or assembly.
Hawk 4 (Wide) Family Install Guide, Rev. A 5
___________________________________________
To insure optimum reliable equipment op-
eration, it is required that technical support
personneldischargethemselvesbywearing
a grounding strap around the wrist and be
connected to a grounding terminal while
workingin thevicinity of,andwhile handling
EOS/ESD susceptible assemblies/parts. If
unavailable, ground yourself frequently by
touching the metal chassis of the system
beforehandlinganycomponents(thishelps
onlyifthesystemisconnectedtoaground).
Avoid static-inducing carpeted areas.
This
procedureisespeciallyimportantwhenhan-
dling printed circuit boards (PCBs).
6 Hawk 4 (Wide) Family Install Guide, Rev. A
___________________________________________
Safety instructions
1. The disc drive(s) are to be installed in a customer
suppliedenclosurewherethesurroundingairdoes
not exceed 50oC.
2. Four (4) 6-32 UNC-2A screws are required for
installation. Maximum screw length into side of
drive is 0.15 inches (3.81 mm). Maximum screw
lengthintobottomis0.20in.(5.08mm).Maximum
screw tightening torque is 6.0 in-lb (.675 NM) with
minimumthreadengagementof.12in.(3.05mm).
3. Thepower requirements areshown in Section1.0
ProductInformation.
4. The power supply must satisfy the safety require-
ments for SELV (Safety Extra Low Voltage) cir-
cuits.
5. Service is to be provided by trained Seagate ser-
vice personnel.
6. The incorporation of the disc drives listed in this
guide into a customer enclosure must meet the
appropriate safety requirements of the country in
which it is used (e.g. UL 1950, CAN/CSA-C22.2
No.950-M89,DINVDE0805:1993andEN60950:
1992 (IEC 950).
Note. Power must be off when connecting or discon-
necting.
Hawk 4 (Wide) Family Install Guide, Rev. A 7
___________________________________________
Sicherheitsanleitung
1. DäsGerätisteinEinbaugerät,vorgesehenfüreine
maximale Umgebungstemperatur von 50oC.
2. Zur Befestigung der Drive werden 4 Schrauben
benötigt (6-32 UNC-2A). Die maximale Länge der
Schrauben in der unteren Seite des Chassis darf
nicht mehr als 0.20 in (5.08 mm) betragen, die in
der oberen 0.15 in (3.81 mm). Maximalle
Schraubenanziehung von 6.0 in-lb. (.675 NM) mit
minimalen Gewindeansperuch .12 in. (3.05 mm).
3. Die Versorgungsspannungen werden im Kapitel
1.0 (Produkt Information) gezeigt.
4. Die Versorgungsspannung muss SELV entspre-
chen.
5. AlleArbeitendürfennurvonausgebildetemSeagate
Service-Personal durchgefürhrt werden.
6. Der Einbau des Drives muss den Anforderungen
gemässDINVDE0805:1993oderEN60950:1992
(IEC 950).
Vorsicht
ÁnsehlussoderEntfernungolerGeräteverbindungnur
beiabgeschalteterVersorgungsspannungvornehmen.
8 Hawk 4 (Wide) Family Install Guide, Rev. A
___________________________________________
Installation Overview
Installation of the drive can be divided into distinct
phases as outlined below. Some of these may not be
applicable to your particular installation requirements.
Refer to the individual drive installation sections for
specific information on your drive model.
•Driveconfiguration:Theusermustselectwhichof
thedrivefeaturesareappropriatetoenableforinstal-
lationintheirsystem.Thisisdonebywayoftheuser
configuration jumpers found on the drive PCB.
•Mechanical installation: After setting up the drive
configuration the drive must be mechanically in-
stalledinto the host system and the power and I/O
cables attached. Previously mentioned precautions
should be observed
•SCSI drives should not be defined in the CMOS:
The SCSI Host adapter has its own BIOS to handle
the Input/output procedures. The CMOS setting for
SCSI drive is either drive type zero, or the "no drive
installed"option.
This manual suits for next models
5
Table of contents
Other Seagate Storage manuals
Seagate
Seagate ST3146855LC - Cheetah 146.8 GB Hard Drive User manual
Seagate
Seagate SKYHAWK AI ST8000VE001 User manual
Seagate
Seagate 15K.5 - Cheetah - Hard Drive User manual
Seagate
Seagate Exos X14 User manual
Seagate
Seagate Exos CORVAULT User manual
Seagate
Seagate ST310014ACE - U Series X 10 GB Hard Drive User manual
Seagate
Seagate Savvio 15K User manual
Seagate
Seagate ST-506 User manual
Seagate
Seagate Expansion User manual
Seagate
Seagate STD124000N User manual
Seagate
Seagate ST9750423AS User manual
Seagate
Seagate EXOS ST16000NM007G User manual
Seagate
Seagate ST2000NX0243 User manual
Seagate
Seagate Barracuda ST380023AS User manual
Seagate
Seagate ST3500320SV - SV35.3 Series - Hard Drive Operating and safety instructions
Seagate
Seagate ST973401LC - Savvio 73.4 GB Hard Drive User manual
Seagate
Seagate Momentus 5400.3 ST9100828SB User manual
Seagate
Seagate 3.5-inch Pushbutton Backup External Hard... User manual
Seagate
Seagate ST336737LW User manual
Seagate
Seagate MOMENTUS ST9500325AS User manual
