Seagate HAWK 2LP ST31231N User manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HAWK 2LP Family:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ST32430N/ND

ST31230N/ND

ST31231N

Contents

Introduction ...................................................................... 1

Electromagnetic interference ........................................... 1

Before you begin.............................................................. 3

Installation overview ........................................................ 8

Product Repair ................................................................. 10

Shipping.................................................................... 11

Product Repair and return information ..................... 11

Technical support services .............................................. 12

Hawk 2LP family product information .............................. 15

Initial set-up information................................................... 17

Drive configuration ........................................................... 22

Drive installation .............................................................. 30

Publication Number: 77767499, Revision A

September 1995

Seagate®, Seagate Technology®and the Seagate logo are

registered trademarks of Seagate Technology, Inc. HawkTM,

SeaFAXTM, SeaFONETM, SeaTDDTM, and SeaBOARDTM, are

trademarksofSeagateTechnology,Inc.Otherproductnames

are registered trademarks or trademarks of their own.

Seagate reserves the right to change, without notice, product

offerings or specifications. No part of this publication may be

reproduced in any form without written permission of Seagate

Technology, Inc.

Hawk 2LP Family Installation Guide, Rev. A 1

____________________________________________________________________________________________________________

Introduction

This manual is organized to assist you in the installation and

operationofyourSeagateHawk2LPFamilydiscdrive.Family

models are listed in Hawk 2LP Family Product Information

section.It alsoprovides informationto aid inobtaining service

for the drive.

Before attempting any installation, please read through all

applicable sections of this document, including all warnings

and cautions.

Warning.

This equipment generates, uses, and can radiate radio

frequency energy andifnotinstalledandused in accordance

with these instructions, may cause interference to radio com-

munications.

Electromagnetic interference (EMI) considerations

The drive(s) described herein, as delivered, are designed for

system integration and installation into a suitable enclosure

prior to use. As such, the drive(s) described herein are sup-

plied as a sub-assembly and are not subject to Subpart J of

Part 15 of the FCC Rules and Regulations nor the Radio

InterferenceRegulationsoftheCanadianDepartmentofCom-

munications. However, the unit has been tested using proper

shielding and grounding and found to be compliant with the

Class A limits of the FCC Rules and the Regulations of the

Canadian Department of Communications.

2 Hawk 2LP Family Installation Guide, Rev. A

_____________________________________________________________________________________________________________

The physical design characteristics of the drive(s) described

herein, serve to minimize EMI radiation when installed in an

enclosure that provides reasonable shielding. As such, the

drive(s) are capable of meeting the Class B limits of the FCC

Rules and the Regulations of the Canadian Department of

Communications.

Note. It is the end users' responsibility to assure that the

drive(s) described herein meet the appropriate EMI

requirements of their system. Shielded I/O cables

may be required if the enclosure does not provide

adequate shielding. If I/O cables are external to the

enclosure, shielded cables should be used, with the

shields grounded to the enclosure and to the host

controller.

Hawk 2LP Family Installation Guide, Rev. A 3

_____________________________________________________________________________________________________________

Before you begin

Verify that the system is switched off and disconnected

from main power before any installation is attempted.

Protect yourself, the drive, and your valuable programs

and data by reading the following cautions and warnings.

• Do not tamper with sealed top cover. Doing so voids your

warranty. The drive contains no user serviceable compo-

nents. See Product Repair section for more information.

• Visually inspect the shipping container for any obvious

damage.

• Verify all parts listed on shipping bill are received with the

equipment. Discrepancies or damage should be reported to

the shipping company.

• Inspectdrivefor possible shippingdamage.Allclaimsofthis

type should be filed promptly with the transporter involved.

Saveoriginalpackingmaterialstobeusedwhen reshipping.

4 Hawk 2LP Family Installation Guide, Rev. A

_____________________________________________________________________________________________________________

• When transporting or shipping a drive or system, please

ensure that they are correctly packed in original Seagate

approved (or equivalent) container and shipped via an air-

ride carrier experienced in handling computer equipment.

• Donotunpack drive fromits static shieldedbag untilyou are

ready to install it in the system.

• Always handle the drive by the frame or casting.

• Donottouch Printed CircuitBoard (PCB) or theI/O connec-

tor pins.

• Never apply pressure to the PCB or to the drive top cover

Caution. Thecircuit assembliesandcomponentscontained

inthis equipment canbedegraded ordestroyed by

Electrostatic Overstress (EOS) or by Electrostatic

Discharge (ESD).

Hawk 2LP Family Installation Guide, Rev. A 5

_________________________________________________________________________________________________________________

Static electrical charges can accumulate quickly

onpersonnel,clothingandsyntheticmaterials.The

electrostatic fields due to these charges when

brought in close proximity to susceptible circuit

assemblies and components, can result in de-

graded reliability or immediate failure of the affect-

ed component or assembly.

To insure optimum reliable equipment operation, it

is required that technical support personnel dis-

charge themselves by wearing a grounding strap

around the wrist and be connected to a grounding

terminal while working in the vicinity of, and while

handling EOS/ESD susceptible assemblies/parts.

Ifunavailable,ground yourself frequentlyby touch-

ingthemetalchassisofthesystembeforehandling

any components (this helps only if the system is

connected to a ground).

Avoid static-inducing car-

peted areas.

This procedure is especially impor-

tant when handling printed circuit boards (PCB's).

6 Hawk 2LP Family Installation Guide, Rev. A

_____________________________________________________________________________________________________________

Safety instructions

1. Thedisc drive(s) are tobe installed ina customersupplied

enclosure where the surrounding air does not exceed

50oC.

2. Four (4) 6-32UNC-2Ascrews are requiredfor installation.

Maximum screw length into side of drive is 0.15 inches

(3.81 mm). Maximum screw length into bottom is 0.20 in.

(5.08mm). Screwtighteningtorques is6.0lb-in (.675NM)

max with minimum thread engagement of 0.12 in (3.00

mm).

3. The power requirements are shown in the Product Infor-

mation section.

4. The power supplymustsatisfy the safetyrequirements for

SELV (Safety Extra Low Voltage) circuits.

5. Service is to be provided by trained Seagate service

personnel.

6. The incorporation of the disc drives listed in this guide into

a customer enclosure must meet the appropriate safety

requirements of the country in which it is used (e.g. UL

1950,CAN/CSA-C22.2No.950-M89,DINVDE0805:1993

and EN60950: 1992 (IEC 950).

Note

Power must be off when connecting or disconnecting.

Hawk 2LP Family Installation Guide, Rev. A 7

_____________________________________________________________________________________________________________

Sicherheitsanleitung

1. Däs Gerät ist ein Einbaugerät, vorgesehen für eine

maximale Umgebungstemperatur von 50oC.

2. Zur Befestigung der Drive werden 4 Schrauben benötigt

(6-32 UNC-2A). Die maximale Länge der Schrauben in

der unteren Seite des Chassis darf nicht mehr als 0.20 in

(5.08 mm) betragen, die in der Seiten 0.15 in (3.81 mm).

Maximalle Schraubenanziehung von 6.0 in-lb (.675 NM)

mit minimalem Gewindeansperuch .12 in (3.00 mm).

3. Die Versorgungsspannungen werden in der Sektion

Produkt Information gezeigt.

4. Die Versorgungsspannung muss SELV entsprechen.

5. Alle Arbeiten dürfen nur von ausgebildetem Seagate

Service-Personal durchgefürhrt werden.

6. Der Einbau des Drives muss den Anforderungen gemäss

DIN VDE 0805:1993 oder EN60950:1992 (IEC 950).

Vorsicht

Ánsehluss oder Entfernung oler Geräteverbindung nur bei

abgeschalteter Versorgungsspannung vornehmen.

8 Hawk 2LP Family Installation Guide, Rev. A

_____________________________________________________________________________________________________________

Installation Overview

Installation of the drive can be divided into distinct phases.

Some of these may not be applicable to all system installation

requirements.Refer to theindividual driveinstallationsections

for specific information on your drive model.

•Drive configuration: Select those drive features that are

appropriate to install the drive in the system. This is done by

installing or removing user configuration jumpers found on

the drive PCB.

•Mechanical installation: After setting up the drive configu-

ration the drive must be mechanically installed into the host

system and the power and I/O cables attached. Previously

mentioned precautions should be observed.

• CMOS configuration: SCSIdrivesshould not bedefinedin

the CMOS. The SCSI host adapter uses its own BIOS to

handle the Input/Output procedures. The CMOS setting for

SCSI drive is either drive type zero, or the no drive installed

option.

This manual suits for next models

Table of contents

Other Seagate Storage manuals

Seagate

Seagate GoFlex Satellite User manual

Seagate

Seagate ST9120817AS - Momentus 5400.4 120 GB Hard... User manual

Seagate

Seagate ST1.3 Series User manual

Seagate

Seagate HAWK 4 User manual

Seagate

Seagate Barracuda 7200.8 ST3200826A User manual

Seagate

Seagate ST9300605FC User manual

Seagate

Seagate BARRACUDA 2LP ST31250N/ND User manual

Seagate

Seagate ST310014A User manual

Seagate

Seagate Medalist 13640 User manual

Seagate

Seagate IRONWOLF PRO NAS ST16000NE000 User manual

Seagate

Seagate ST3000DM002 User manual

Seagate

Seagate Exos 7E10 User manual

Seagate

Seagate Barracuda 7200.7 Plus ST3200822A User manual

Seagate

Seagate ST31500341AS - Barracuda 1.5 TB Hard Drive User manual

Seagate

Seagate GoFlex Pro User manual

Seagate

Seagate BARRACUDA ST1000DM014 User manual

Seagate

Seagate ST3120025ACE User manual

Seagate

Seagate ST31000525SV - 1.0TB 7200RPM Sata... User manual

Seagate

Seagate ST9100828AS - Momentus 5400.3 100 GB Hard... User manual

Seagate

Seagate EXOS ST4000NM0035 User manual

Seagate

Seagate Wireless Plus 1AYBA4 User manual

Seagate

Seagate ST9250317AS - Momentus 5400 FDE 250 GB Hard... User manual

Seagate

Seagate ST3000VX000 User manual

Seagate

Seagate ST3620N User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide