
SCION tC 2011 - EC REARVIEW MIRROR
Procedure
Page 2 of 11 pages
Issue: C 05/20/13
10 mm Wrench
Fig. 1-1
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
Safety (eye protection, rechecking torque procedure, etc.).
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Please see your Scion dealer for a copy of this document.
1. Remove Battery Cable.
(a) Protect fender before starting.
(b) Do not touch the positive terminal with any
tool when removing cable.
(c) Remove the negative battery cable.
(Fig. 1-1)
2. Vehicle Disassembly.
(a) Remove the OE mirror.
(1) Disengage the two claws and remove the
mirror cover from the mirror base.
(Fig. 2-1)
(2) Pull the lever in the direction indicated
by the arrow shown in the illustration and
slide the inner rear view mirror assembly
upward to remove it. (Fig. 2-1)
(b) With a panel removal tool, carefully remove
the overhead dome light assembly. (Fig. 2-2)
(1) Take care not to damage headliner.
Panel Removal Tool
Fig. 2-1
Fig. 2-2
Panel Removal Tool