Saxby Lighting 13889 User manual

Outdoor LED Kits

13889,13890, 13988,

13989,13992, 13994,

Warning

Specification

The Kit should contain:

• 1 x 12V Indoor inline transformer with 15 metres of cable,

• 1 x Outdoor rated 10-way junction box,

• 10 x LED light fittings each with 5 metres of cable attached, Junction box blanking plugs.

Power Supply: Input: 240V 50Hz a.c. Output 12V d.c. 5W

Lamp: 13889 & 13992 - 3 x 0.07W White LED

13890 & 13994 - 3 x 0.07W Blue LED

13988 - 6 x 0.07W White LED

13989 - 6 x 0.07W Blue LED

IP rating: 67

These instructions on wiring and installation are provided as a guideline to assist you. Some experience of electrical

wiring and do-it-yourself is required to install the light fitting. If at any time you are unsure of how to proceed, please

consult a qualified electrician.

The power supply is Double Insulated and does not require connection to an Earth circuit.

The LED units are Safety Extra Low Voltage and must not be earthed.

Please read these instructions carefully before commencing any work.

This unit must be fitted by a competent and qualified electrician.

Install in accordance with IEE Wiring regulations and current Building Regulations.

This system operates at Safety Extra Low Voltage (12V), via a transformer. Never connect the light fittings directly

to the mains without using a transformer.

Ensure that the supplied transformer is used.

The mains plug must be situated indoors (e.g. house, garage, shed) in order to protect it from the elements.

Do not exceed the transformer load. Transformers may require a minimum load to operate.

Always disconnect the transformer from the mains when installing or maintaining this system.

This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.

This product cannot be dimmed.

This product is rated at IP67. These are suitable for installation in very wet areas, but not permanently submerged.

The transformer must not be installed directly in the soil, but placed in a protective box.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Check with your local authority or retailer for recycling advice.

III

27.5

30.0

Diameter

30.0

Diameter

45.0 27.0

61.6

13.3

Ø14.3

110.7

74.5

40.0

Installation

Layout

• This LED lighting kit is designed for indoor and outdoor installation for use in patios, in walls, on decking, step

edges, in pathways and in other areas of the garden.

• This system operates at Safety Extra Low Voltage (12V), via the plug-in transformer. Never connect the light

fittings directly to the mains without using this transformer.

• Always unplug the transformer from the mains when installing or maintaining this system.

1. Position the plug next to the indoor mains outlet socket that the system will connect to. Do not plug-in at this

stage.

2. After deciding the layout of the light fittings, and the position of the junction box, ensure the cables are long

enough to connect to the desired positions.

3. Drill the mounting holes for the light units taking care not to damage any pipes or mains cables beneath the

mounting surface. For 30mm diameter LED lights drill a 22mm clearance hole. For 45mm diameter LED lights

drill a 32mm clearance hole. Minimum hole depth is 30mm.

4. Feed the plug and cable of each light unit through the mounting holes and push unit into the hole to secure.

5. Connect each LED light to the junction box ensuring each plug is fully screwed into the junction box sockets.

6. Ensure that all the LED heads are connected to the IP67 junction box.

7. Connect the transformer cable into the end socket on the junction box

8. Plug the transformer into the mains socket and switch on.

30mm diameter LED

22mm diameter

mounting hole

(minimum 30mm depth)

45mm diameter LED

32mm diameter

mounting hole

(minimum 30mm depth)

Safety Information

• Plan the desired layout of these fittings carefully, ensuring the cables will reach the distances between the

indoor transformer, the outdoor junction box and each light fitting.

• Avoid locating any cables in positions that would cause a trip hazard. Position cables and junction box away

from areas where they may be at risk from being cut, trapped or damaged.

• The mains plug must be situated indoors. The kit can be wired into a IP67 external terminal block. This must be

carried out by a competent and qualified electrician.

• The transformer is rated at IP67 and can be positioned outdoors.

• The junction box is rated at IP67 and can be positioned outdoors.

• The light units are rated at IP67.

We recommend cleaning with a soft dry cloth.

Do not use solvents or abrasive cleaners as these could damage the finish.

To prolong the life and keep your outdoor lighting in good condition, it is recommended that periodically it is

cleaned using a soft cloth followed by the application of a light coating of oil, such as WD40.

Do not clean the units with a pressure washer.

Waste electrical products should not be disposed of with household waste. Please recycle where

facilities exist. Check with your Local Authority or retailer for recycling advice.

Live Voltages may be present in the transformer even when turned off or when completely

disconnected.

For your safety, always switch off the supply before maintaining the system.

This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.

Saxby Lighting Ltd. BH23 3PE.

Care and Cleaning

Recycling Advice

Safety Information

If not using the supplied plug then the product must be wired to a IP67 rated terminal block.

Having correctly identified the wiring from your existing light fitting, connect to the approved outdoor rated

external terminal block in the following way:

NEUTRAL

SWITCHED LIVE

BLUE (N)

BROWN (L)

SUPPLY LIGHT FITTING

Wiring

Iss.2 15092011

This manual suits for next models

Table of contents

Other Saxby Lighting Outdoor Light manuals

Saxby Lighting

Saxby Lighting Severus EL-40105 Manual

Saxby Lighting

Saxby Lighting Palin Spike Manual

Saxby Lighting

Saxby Lighting 75270 Manual

Saxby Lighting

Saxby Lighting Ikon Pro CCT Series Manual

Saxby Lighting

Saxby Lighting Zone Bollard User manual

Saxby Lighting

Saxby Lighting 40655 Manual

Saxby Lighting

Saxby Lighting Doron Wall Manual

Saxby Lighting

Saxby Lighting Seina User manual

Saxby Lighting

Saxby Lighting Bosco 1612T35A Manual

Saxby Lighting

Saxby Lighting Bianco LED CCT PIR User manual

Saxby Lighting

Saxby Lighting Luminatra Smart RGB User manual

Saxby Lighting

Saxby Lighting 1818PIR Manual

Saxby Lighting

Saxby Lighting Panther Wall 52016 Manual

Saxby Lighting

Saxby Lighting BLISS 13799 User manual

Saxby Lighting

Saxby Lighting 73716 User manual

Saxby Lighting

Saxby Lighting Inova Bollard Manual

Saxby Lighting

Saxby Lighting Aretz GU10 Recessed User manual

Saxby Lighting

Saxby Lighting Equinox Bollard Manual

Saxby Lighting

Saxby Lighting POLGU10 User manual

Saxby Lighting

Saxby Lighting Ware Outdoor Wall Manual

Saxby Lighting

Saxby Lighting Halbury Wall Manual

Saxby Lighting

Saxby Lighting Canillo 67699 User manual

Saxby Lighting

Saxby Lighting Palin Spike Manual

Saxby Lighting

Saxby Lighting Severus Manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual