sauter TVP User manual
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction manual manual test bench
SAUTER TVP/TVP-L
Version 2.0
11/2020
GB
TVP-BA-e-2020
PROFESSIONAL MEASURING
2 TVP-BA-e-2020
GB
SAUTER TVP/TVP-L
V. 2.0 11/2020
Instruction manual manual test bench
Thank you for purchasing the manual crank test stand from SAUTER. We hope that
you will be very satisfied with the high quality of this measuring system with its high
reproducibility. For any questions, wishes and suggestions please do not hesitate to
contact us.
Table of contents:
1Scope of delivery........................................................................................... 3
2Warnings ........................................................................................................ 3
3Technical description.................................................................................... 3
3.1 Technical data test bench ....................................................................................................... 3
3.2 Technical data length measuring unit LA (without serial interface) ................................... 4
4Maintenance................................................................................................... 4
TVP-BA-e-2020 TVP-BA-e-20203
1 Scope of delivery
•SAUTER TVP/TVP-L
•A hook
2 Warnings
Incorrectly performed force measurements can lead to serious injury to persons and
damage to property and must therefore only be performed by trained and experienced
personnel.
In particular, it should be avoided that forces are applied to the measuring device by
the test stand which exceed the maximum load (Max) of the test stand orthe measuring
device or which do not act on the device axially via the test stand.
3 Technical description
3.1 Technical data test bench
TVP
TVP-L
maximum force
500N
Measurement direction
Vertical
Stroke length
78mm
Thread base plate
M6
Thread of the encoder
mounting plate
4x M3 (included in delivery)
Workspace
315mm
Weight
approx. 10,5kg
4 TVP-BA-e-2020
3.2 Technical data length measuring unit LA (without serial interface)
TVP
TVP-L
Scale length
-
100mm
Readability
0,01mm
Control buttons
On/0
•Switch on
•Zeroing the display of the LA
mm/in
Change of units between millimeters and inches
▲
Manual length preselection, upwards
▼
Manual length selection, downwards
4 Maintenance
To avoid rust, the test stand should be cleaned with a soft cloth after each use.
Under no circumstances should aggressive cleaning agents be used.
This manual suits for next models
1
Table of contents
Other sauter Test Equipment manuals
sauter
sauter HK-D User manual
sauter
sauter HK-D User manual
sauter
sauter TI-A0 User manual
sauter
sauter SD 50N100 User manual
sauter
sauter TVP-L Series User manual
sauter
sauter TN-EE User manual
sauter
sauter HMP User manual
sauter
sauter HD Series User manual
sauter
sauter HMM User manual
sauter
sauter TVO 500N300 User manual
sauter
sauter HMM User manual
sauter
sauter DA User manual
sauter
sauter TVL-XL User manual
sauter
sauter TVL-XS User manual
sauter
sauter SAUTER HMO User manual
sauter
sauter HN-D User manual
sauter
sauter TE 1250-0.1 FN User manual
sauter
sauter TVM-N User manual
sauter
sauter HN-D User manual
sauter
sauter TVO 500N300 User manual
