Satlink WS-6926 User manual

USER’S MANUAL

WS-6926

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Table of Contents

1.GUIDE.......................................................................

1.1 Important Safety Instructions............................

1.2 Unpacking.........................................................

1.3 PRODUCT OVERVIEW & ILLUSTRATION......

1.4 INSTALLATION OF METER.............................

2.OUTLINE...................................................................

3.THE MENU OSD INSTRUCTION..............................

3.1 Search...............................................................

3.1.1 Satellite....................................................

3.1.2 LNB type..................................................

3.1.3 ......................

3.1.4 TP Num....................................................

3.1.5 ..................................................

3.1.6 ...................................................

3.1.7 .............................................................

...............................................

............................................

...............................

......................................................

.....................................

.........................................

........................................................

3.3 Multimedia.........................................................

3.3.1 MUSIC.....................................................

3.3.2 VIDEO.....................................................

LOW FREQ / HIGH FREQ

Frequency

Symbrate

Pol

3.1.8 NIT Search

3.1.9 LNB Power

3.1.10 LNB 22KHZ

3.1.11 DisEqc type & Input

3.1.12 Motor

3.1.13 Unicable setting

3.1.0.1 Quick Search

3.2TP Manager

3.3.3 PICTRUE.................................................

3.3.4 Upgrade...........................................................

3.4 System Setting....................................................

3.4.1 Language...................................................

3.4.2 Screen format............................................

3.4.3 ..............................................

3.4.4

..................................................

3.4.5 Time Zone..................................................

3.4.6 Channel reset.............................................

3.4.7 Mode, SW VER, Release Time..................

4. Channel......................................................................

4.1 Manager Channel...............................................

4.1.1 Rename Channel.......................................

4.1.2 Del Channel...............................................

4.1.3 Lock Channel.............................................

4.1.4 Skip Channel..............................................

4.2 Favorite Manager.................................................

4.2.1 ........................................................

4.2.2 .....................................................

4.2.3 ..................................................

4.2.4 ..................................................

4.2.5 ......................................................

4.3 EPG.....................................................................

4.4 Program List.........................................................

4.5 ................................................

5 Technical Specification..............................................

6 Trouble Shooting.......................................................

Factory reset

Longitude & Latitude; Location &Hemisphere

...................

Rename

Sort order

Favorite set

Favorite Sort

TV/Radio

4.2.6 Sat sort.......................................................

Subtitle & Teletext

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

1.2 Unpacking Equipment

Open the package and make sure it includes all below items, if

any is missing, please contact the reseller for replacement.

1.Digital Satellite Meter

2.User’s manual

3.AV cable

4.Car charger cable

5.Adaptor

6.Silicone case

1.3 Product Overview & Illustration

01-Digital Satellite Meter Digital Satellite Meter-02

Do not remove the cover.

Do not let the unit exposed to extreme heat, cold or humid

conditions.

Thank you for choosing our product. Before installation,we

would like to remind you some notes, which is very important

for operating safely and properly, as follows:

1.GUIDE

1.1 Important Safety Instructions

Be sure to read this user manual before starting your operation.

You must install the dish with correct direction and angle. If

the dish is not working properly, contact your local dealer.

When the unit is suddenly moved to a hot area from a cold

area, it may cause some problems. In that case, turn off the

power,and turn on again after 1-2 hours.

Keep meter placed in clean space with sufficient ventilation.

Do not cover the meter with or place it on a unit that emits heat.

Clean the case by a soft cloth with a little washing liquid.

No liquids or any other materials to come inside of the unit.

Warning:All instructions are subject to the latest version

of software without prior notice if any new functions are

added to the equipment.

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

NO Description FUNCTION

LNB IN Connect to satellite antenna cable

AV OUT Connect to AV port for TV

AV IN Connect to AV port for meter

Power witch Turn on/off meter

USB Port Connect to USB memory

DC Slot Connect to Adaptor Input

Speaker Speaker Integrated

LCD Screen Video display

03-Digital Satellite Meter Digital Satellite Meter-04

Power Power indicator light

22KHZ 22Khz indicator light

13V/18V Vertical /Horizontal polarization voltage

output light

LOCK Signal lock indicator light

Charger (Note1)

Charger indicator light

F1 (Note 2) 1)Shows the Subtitle menu ;

2)TV/Radio switch

F2(Note 2) 1)Shows the EPG menu;

2)Audio select

F3(Note 2) 1)Shows the Favorite Manager menu;

2)lock beep alarm

F4(Note 2) 1)Shows Manager Channel menu;

2)TV system switch

B.Light Display of LCD ON/OFF

Show the main menu on the screen

or jump back to previous menu in

sub-menu setting conditions

NEVIGATION KEY

Volume Control or move cursor,

channel or change, confirm etc

EXIT Escape from present menu and save

the settings

0-9 Select channels or enter programming

MUTE Enable or disable the audio output

SCAN 'Quick Search' menu shortcut key

(Note 4) When power on the meter ,

displays the battery level

TV/RADIO Switch between TV and Radio mode

INFO To display channel status or various

program information of current channel

USB menu shortcut key

BEEP (Note 3) Sound Alarm for Locking Signal on/off

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Note1:When the adapter insert dc slot,Charging indicator

scintillation three times, then the indicator is often bright,

when the batteries charged sufficient, the charge indicator is

going out.

Note2:Keeping the key over 1 s, it will be the (2) function,

otherwise is the (1)function.

Note3:The Key only in menu'3.1.0.1 Quick Search'is effective.

2. OUTLINE

3.5 Inch High Definition TFT LCD Screen

H.264 Hardware decoding

Digital meter for signal strength and quality

Supports scan of Auto,Manual.

Sound and Light Alarm for Locking Signal

Speaker Integrated

Support both AV out and AV in

Ant short protect

PAL-NTSC auto-conversion

8.4V/3000mAh Lion Battery Included

Software upgrade via USB port

Easy to carry

Fully DVB-S/DVB-S2

3. THE MENU OSD INSTRUCTION

If you have installed and connected the cables of the meter,

pressing MENU key to display the Main Menu.

Satellite Finding

System

Multimedia

TP Manage

05-Digital Satellite Meter Digital Satellite Meter-06

1.4 INSTALLATION OFMETER

Note4:When the battery is on power failure, a voice alarm, pl-

ease a timely charge, do not continue to be used to avoid the

internal battery runs out and shorten the usage time.

Press the keys of to move the cursor up or down in

the menu interface, then use OK key to confirm a selection.

▲▼◄►

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

3.1 Search

3.1.1Satellite: Press ◄►key enter the satellite list.Use

▲▼ key to move the cursor, then press OK key to select the

satellite that you want.

3.1.4 TP Num:Press ◄►key into the TP list. Use ▲▼key to

move the cursor then press OK key to select the satellites

that you want.

07-Digital Satellite Meter Digital Satellite Meter-08

3.1.2LNB type: Press ◄►key, you can select single/Universal/

UnicableSCRetc, according to your physical LNB type.

3.1.3LOW FREQ / HIGH FREQ:Using the numeric keys

or pressing ◄► keysenter the proper LNB fre quency refe-

rring to your LNB.

3.1.5Frquency: Frequency of the current transport, Input

the value by using the numeric keys.

3.1.6Symbrate:Symbol rate of the current transport, Input

the value by using the nu meric keys.

3.1.7Pol: Press ◄► key to changeVertical or horizontal of

polarization.

3.1.8 Search mode:Press ◄► key to select search mode:

TV Only, All Service, FTA Only.

3.1.9LNB Power: Press ◄►key to select the desired option.

If your meter is connected to another receiver through

support, in case the other receiver connected dir-

ectly to the LNB, then select OFF.

Loop

Throught

3.1.10 LNB 22KHZ:22KHz control is automatically set for

each LNB alternative. If “Universal” is selected, 22KHz

control should be “off state”.

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

09-Digital Satellite Meter Digital Satellite Meter-10

3.1.11 DisEqc type & Input:Press ◄►key to set the port

type or number, which get the RF signal from the LNB, if

the LNB is connectedto DiSEqC switching box.

3.1.12 Motor: If you use the equipment of motor, Accord-

ing to your motor category, the meter providesDiSEqC1.2/

USALS. This will make you have exactin formation to dir-

ect your antenna toward a satellite.

Press ◄► key to select Motor type, then press OK key into

interface of motor set.

USALS SET

￭ Frequency: Press ◄►key to select the TP.

￭ Satellite Pos: Position of satellite, input the value by using

the numeric keys.

￭ My Longitude & My Latitude : Position of local, Input the

value by using the nu meric keys.

￭Pos Command: Check the signal locked, the motor moves

correct position,press OK key to store the present position.

￭ Satellite: Press ◄►key to select the desired satellites.

DiSEqC1.2 SET

￭ Go to Reference: A starting point for the satellite search fun-

ction can be selected by pressing the OK key. If the signalis locked,

the present position is automatic stored.

￭ Frequency: Press ◄►key to select the TP.

￭ Satellite: Press ◄►key to select the desired satellite.

￭ Move Step:The satellite now can be turned into the desired

direction using the arrow buttons

￭ Continuous Move: The satellite can be continuous moved

to the desired direction.

￭ Set limits for the antenna.Set Limit:

3.1.13 Unicable setting: If in the '3.1.2 LNB type' select

you can set SCR.

￭Unicable type: You can select '8*SCR”or”4*SCR”.

￭ Channel No. : You can select SCR channel.

￭Press ◄► key select frequency of SCR channel or Input the value

by using the numeric keys.

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

11-Digital Satellite Meter Digital Satellite Meter-12

3.1.0.1 Quick Search

In satellite search interface,pressing OK key will enter the

quick search.

If you set Longitude and Latitude Under the “3.6 system setting”,

the angle of LNB, theorientation and elevation of antenna, all

will be displayed on the screen.

Press ▲▼ key to select the TP frequency.

Press ◄► key to select S/Q, Monitor, Scan, Auto, Blind,then

press OK key into function.

￭ S/Q: Enlarge showing of the strength and quality

￭ Monitor: Level Showing the strength and quality

￭ Scan : According to the current TP,search channel

￭ Auto : According to the user db of satellite,search channel.

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

13-Digital Satellite Meter Digital Satellite Meter-14

￭ Blind search: Blind search all frequency.The first, scan all TP,

According to these Tps, auto scan programs

3.2 TP Manager

Press ◄►keyto change satellite .Pressing OK/▲▼ key, sw-

itch to TP select

Press ◄►key to change satellite .Pressing▲▼ key to select

TP.

￭Press F1 key to add TP

￭Press F2 /OK key to edit TP

￭Press F3 key to delete the current TP

￭Press F4 Key to search the current TP

3.3 Multimedia:

support the following device:

The meter intergrates USB port, which

lUSB portable harddisk lUSB memory

It will appear “ storage device is inserted ” when USB device

is inserted to the USB port that means the usb device has been

recognized and can be used. Otherwise will appear “USB

Device Not Found”.

USB feautres:

Multi system format support: FAT16, FAT32 and NTFS format etc.

Mulit file format support: wma, mp3,mp4,avi,jpg,jpeg,bmp,img etc

3.3.1MUSIC:Press ▲▼ key to select song, then press OK

key to play.

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

15-Digital Satellite Meter Digital Satellite Meter-16

There are functions of Play/Pause, Previous song,

Next song and stop and so on.

3.3.2VIDEO:

press OK key to play.

Press ▲▼ key to select the video file, then

Press ◄►key to control volume. Press MENU key to appear

playing bar.

Press ◄►key to move the cursor, then the tip will appear

on upper right of screen, then press OK key to operate fun-

ction. There are functions of Backward, Forward, Play/

Pause, Previous file, Next file, Stop.

3.3.3 PICTURE: Press ▲▼ key to select picture, then press

OK key to play.

Press MENU key to appear playing bar.

Press ◄► move the cursor, then press OK key

to operate function.

key to

There are functions of Rotating, Delay setting, ZOOM, Play

/Pause, Previous Picture, Next picture, Stop

3.3.4 Upgrade

Press F1 key to dump user database.

Press F2 key to dump default database.

Press F3 key to dump flash.

Press ▲▼ key to select update file,

Then press OK key to select upgrade part: app code;user

database; default database.

Press F1/F2 key to control volume.

Press ◄►key to move the cursor, then press OK key to

operate function.

Table of contents

Other Satlink Camera Accessories manuals

Satlink

Satlink WS-6933 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions