Sanyo SFX-30 User manual
INSTRUCTION MANUAL
Facsimile Transceiver
1
Introduction
Thank you for purchasing the SFX-30. This international-standard high-speed digital facsimile transceiver has
many outstanding features, including:
●lo-page automatic document feed
●Automatic switching between telephone, fax machine
and answering system
●28-number automatic dialing memory
●paper-save mode reception with reform copy
capability
●Superfine resolution
.Halftone
●30-meter roll of recording paper
.16-character digital display
●Built-in telephone handset
●Voice response (with auto reception)
●Automatic paper cutter
.Enlargement/reduction copy
.Compatible with new plain-paper quality thermal
paper (high-grade thermal paper)
.Built-in anti-curl system
In order to use the SFX-30 effectively and keep it in good working order for along time, read this instruction manual
thoroughly and keep it for future reference.
12
Table of contents
wore Use ]
Unpacking .......................................”.. ”.”..” 3
Part names and functions ................................... 4
Accessories ................................................... 4
Operation panel .............................."...".""""."."""". 6
installation ...................................................... 8
Telephone line and ACconnections ......-...........8
Recording paper ..................................... 10
Confirming proper operation (copy ing) ............... 12
Phone calls ..................................................... 14
Hold ............................................................ 15
Redial .................................................................. 15
One-touch dial ................................................l6
Speed.dial .................................................... 17
Extension telephone/answering machine ..............18
[Faxuse]
original documents .............................................. 20
Transmission .................................................... 21
Contrast/resoiution ........................................... 21
Placing original documents ............................ 22
Manual dialing transmission ......................... 23
Automatic dialing transmission ........................ 24
One-touch dialing transmission ......................... 25
Speed-dialing transmission ............................ 26
Redial ............................................................ 27
Reception ........................................................ 28
Reception modes ........................................... 28
Automatic reception mode .............................. 29
Manual reception mode ................................ 30
Answering reception mode ............................ 31
Remote reception .......................................... 32
Phone reservation ............................................. 34
Copying (enlargement/reduction/reform) ...........35
Diagnostic reports ........................................... 36
lI=i==min9 FunctionsI
Menu selection ................................................ 38
Timer transmission ............................................ 39
Polling reception ............................................ 42
Paper-save reception .......................... 43
Issuing activity report ................................. 44
Set mode selection ............................................ 45
Entering names ........................................................ 46
One-touch dial memory programming .................... 48
Speed-dial memory programming ........................... 50
Printing number list.................................................. 53
Header print (setting your station name
and fax number) ............................. 54
Calendar and clock ..................................... 56
Feature switches ................................................ 58
Closed network communication
(Feature switch No. 26) ........... 63
Remote reception activation number ................... 64
Thermal paper handling .......................................... 65
Jammed original/recording paper ........................ 66
Cleaning ................"... """""..""""""""""""..".".".."."" 68
Troubleshooting ........................................... 70
~ecifications ]
3
Unpacking
To unpack the SFX-30:
1. Open the carton.
2. Remove the accessories (handset, recording paper roll, etc.) from the carton.
i
88
3. Remove the fax machine along with the foam braces on both sides. *
4. Remove the polyethylene wrapping around the fax machine *
5. Remove the transportation tapes.
6. Save the carton and the foam braces for later storage and/or shipping. D
7. Place the machine where there is access to an AC outlet and a modular phone jack. (Be sure to observe the
b
precautions below.)
places where it will be exposed to excessive heat
TO THE AC CORD IS ASAFETY RISK AND CAN
Placement precautions
●Avoid placing the SF)(-3(J in humid or dusty places, or in
(direct sunlight, heaters, etc.).
●Do not step on or set anything on the AC cord. DAMAGE
CAUSE AFIRE.
●Install the unit only on a stable surface.
●Do not connect the SF)(.3CI to the same AC outlet as appliances that generate large amounts of interference
(heaters with thermostats, appliances with motors, etc.). It is best to use acompletely separate electrical outlet.
●Keep the SFX-3(1 away from water. If water accidentally enters the unit, unplug the AC power cord immediately.
DO NOT PLUG THE UNIT IN AGAIN. Contact an authorized Sanyo service center or dealer.
Handling precautions
●Do not remove any parts that are held in place with screws. (The SFX-30 does not contain any user-serviceable
items).
.Maintain standard room temperature 50C –350C (410F –95°F) during use. DO not subject the unit to shock or
vibration. Do not move the unit while it is in use.
●Arapid increase in room temperature in COOI weather can cause condensation to form inside the unit. if this
happens, wait at least 15 minutes after turning the unit on before attempting to operate it.
Failure to do so may result in paper jams and/or poor print quality.
●When cleaning the cover or operation panel of the unit, wipe gently using adamp cloth to which asmall amount
of aneutral detergent has been added. NEVER USE SOLVENTS OR CHEMICALLY TREATED CLOTHS.
f4
Part names and functions
Recording paper cover
Protective cover
Right side
Original guide
Original exit
Operation panel
I
Original slot
AUTOMANU PULSETONE ,.&
—~ @
()* ;;6,~+-.
AUTO/MANU switch PULSE/TONE
Make sure the accessories listed below are included with the unit.
Accessories
Q
switch
. Handset x10High-grade thermal paper x1●Recording paper tray x1
●Adhesive label x1●Instruction manual x 1
5
Left side
Bi3
HANDSET ([1~1)]
OFFMHLMH
IUm] [Urn]
I*
.’$
J
Handset
Rear view
jack
Monitor volume switch
Ringer volume switch
Recording paper exit
I
Rear cover
Inner view
~
I
AC cord I
Telephone line jack (LINE)
r
roller
I
LGreen release lever
6
Operation panel —
ODisplay
@One-Touch Keys
@ERROR Lamp
~MENU Key
@SET Key
@ANSWER Key
@ANSWER Lamp
@SPEED DIAL Key
@REDIAL/PAUSE Key
II II I 1 1
1II14 I15
n 2030 II
)D’o’c
[1
STOP/C COPY START
w?
●Shows calendar and clock functions, operation guidance, machine status, etc.
●Frequently dialed numbers can be stored in memory using these 8keys.
The one-touch keys are also used when entering names in memory.
●Lights if acommunication error occurs.
.Press this key when selecting various functions.
●Press this key to confirm selections.
●Press this key to set to answer mode.
●Lights when the unit is set to answer mode.
●Press this key when using speed dial.
cPress this key to redial the last number dialed.
●Press this key to insert apause between two digits in anumber being dialed.
7
—
4
SPEEDIAL
REDIAL/PAUSE
TONE
HOLD
SPEAKER
T
-T r
●These keys are used to dial fax and phone numbers and to change various
functions.
@Number Keys O-9#*
—
~TONE Key ●press this key to switch from pulse dialing to Touch-Tone dialing.
.Temporarily places acall on hold.
●Allows you to monitor acall without using the handset.
.Press this key to select contrast settings.
@HOLD Key
@SPEAKER Key
@CONTRAST Key
@RESOLUTION Key .Press this key to select resolution settings.
@START Key ●Press to start transmission or manual reception.
.Press to make acopy.
.Press to interrupt transmission/reception/copying or to stop the ERROR
indicator lighting.
●press to cancel various setting and dialing functions and to remove an
original document that has been placed in the unit.
@STOP/C Key
8
Telephone line and AC connections
A? outlet
Connect AC plug into AC outlet.
●The SFX-30 should not share atelephone line cord with other communica-
tion equipment except extension telephone and/or answering machine pre-
pared for the
unit. connection, as this may obstruct the proper functioning of the
To wall jack
-=3
/
.,’
,,,
*The telephone line cord differ with each country.
I
Telephone line
.Another telephone and/or answering machine can be connected to the SFX-30 through the line cord
supplied with the SFX-30 or by the SANYO Dealer. /
Coiled cord
LHandset jack
le jack
(LINE)
Setting the dialing mode switch
Set the dialing mode switch (DIAL) to the correct position for
your telephone line.
3Push-button Rotary-dialing
telephone telephone
I
The sound
heard when Short audible tones Continuous
you dial clicking
sounds
Your
telephone Touch-Tone Pulse-Dialing
line is
mpuL~’o”’ PULSETONE
/)g
Set the switch
to 1101 Ii&l
you are not sure which dialing system your telephone is using,
ontact your telephone company.
Other manuals for SFX-30
2
Table of contents
Other Sanyo Fax Machine manuals
