Sanyo VA-82LAN User manual

INSTRUCTION MANUAL VA-82LAN

Option Board (Network)

English 1

Table of Contents

Instruction .................................................................................................... 2

■System requirements ....................................................................................... 2

Flow of Camera Operation through to Network Operation ...................... 3

■User names and operating privileges ............................................................. 4

Configuring the TCP/IP Settings on PC ..................................................... 5

Accessing the Camera ................................................................................ 7

■Accessing the Camera Using the UPnP Connection ..................................... 8

Structure of Main Screen and Function of Each Section ......................... 9

How To Use the Control Panel ................................................................. 11

Establishing Voice Communication ......................................................... 13

Other Operations on the Main Screen ..................................................... 14

Operations on Configuration Screen ....................................................... 15

NETWORK SETTINGS ............................................................................... 17

SECURITY SETTINGS ................................................................................ 19

CLOCK SETTINGS ..................................................................................... 20

CODEC/STREAMING ................................................................................. 22

AUDIO SETTINGS ...................................................................................... 24

E-MAIL SETTINGS ..................................................................................... 25

IMAGE TRANSFER SETTINGS ................................................................. 27

■Image Transfer Mode ...................................................................................... 27

■For HTTP connection ..................................................................................... 28

■For FTP connection ........................................................................................ 30

DDNS SETTINGS ........................................................................................ 33

SCHEDULE SETTINGS .............................................................................. 35

■SCHEDULE ...................................................................................................... 35

■AUTO MODE SCHEDULE ............................................................................... 37

■HOLIDAY SETTINGS ....................................................................................... 38

OPTION SETTINGS .................................................................................... 39

Changing the Camera Settings ................................................................ 41

Settings List ............................................................................................... 42

OpenSSL License ...................................................................................... 47

Specifications ............................................................................................ 49

2 English

Instruction

This option board (Network) is an extension board that allows you to connect Sanyo’s color CCD

camera (Power Board Unit: VA-84SA or VA-80SA) to your network.

After installing the option board on the camera, you can view live video from the camera using Internet

Explorer on your PC. If you want to view live videos from multiple cameras, install the supplied

“VA-SW3050Lite” monitoring software.

■System requirements

The system requirements for camera operation via network are as follows:

•PC:IBM PC/AT and compatibles

•OS:Windows XP Home Edition/Windows XP Professional

•CPU:Pentium IV (2.0GHz or higher) (3.0GHz or higher for using the VA-SW3050)

• Memory: 512MB or more (1GB or more for using the VA-SW3050)

• Network interface: 10Base-T/100Base-TX (RJ45 connector)

• Display card: 1024 x 768 pixels or higher, 16 million colors or higher

• Graphics chip: ATI RADEON X1000 series or higher

nVIDIA GeForce 6000 series or higher

• Web browser: Internet Explorer Ver.6.0 or higher

• Voice: Sound card and speakers with 100% DirectX compatibility

Note:

• LAN cable must be CAT-5 or higher, and no more than 100 m (109.4 yds) in length.

• Image may be delayed and/or audio interrupted, depending on the environment of use.

• Be sure to use the latest versions of operating system and browser, which can be updated by using

the Windows Update service.

This instruction manual is copyrighted by SANYO Electric Co., Ltd. No materials contained in this manual may be

reproduced in any format without the prior permission of the copyright holder.

Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

The official name for “Windows” used in this manual is Microsoft®Windows®Operating System. In this manual,

note that the word “Windows” refers to both “Microsoft®Windows®2000 Operating System” and “Microsoft®

Windows®XP Operating System”.

Intel and Pentium are registered trademarks or trademarks of Intel Corporation and its subsidiaries in the United

States and other countries.

IBM and IBM PC/AT are trademarks of International Business Machines Corporation.

UPnP is a trademark of UPnP Implementers Corporation, which is established by the UPnP Forum SC.

Java is a trademark of Sun Microsystems, Inc.

All other brands and product names in this manual are the registered trademarks or trademarks of their respective

owners.

English 3

Flow of Camera Operation through to Network Operation

For detailed instructions on individual procedures, refer to the pages shown below.

1Installing the option board on the camera

Refer to the supplied “INSTALLATION MANUAL” for how to install the option board on the camera and

make connection using LAN cables.

Refer to

2Configuring the TCP/IP settings on PC Page 5

3Installing the “H.264 Plug-in” from the supplied CD-ROM

onto the PC

Run the “setup.exe” program shown below. -

4Accessing the camera

Enter your user name and password to access the camera using the Web browser. Page 7

5Monitoring live video in the main screen

After accessing the camera, the live video will be displayed on the main screen. Page 9

6Configuring the advanced settings on the configuration

screen

Select the configuration screen using the menu button for an administrative user.

When you access the camera for the first time, be sure to perform the settings on the

[CLOCK SETTINGS] screen (See page 20).

• You can change the settings stored in the camera remotely through the network

connection (See page 41).

Page 15

Flow of Camera Operation through to Network Operation

4 English

■User names and operating privileges

Two types of user name shown below can access the camera and are authenticated by password during the login

process.

The operations that the user can perform for the camera depend on the user name used to access the camera.

Note:

• If a guest user attempts any operation on the configuration screens without permission, the

authentication dialog box appears.

In this case, select “admin” in [User Name] and enter the administrative user password in [Password]

to change the operation privilege.

• Change the password periodically to maintain security.

To change the password, use the [NETWORK SETTINGS] screen (see page 18).

• Up to 16 users can access the camera simultaneously.

(When transmitting images encrypted with SSL, only up to 12 users can access the camera.)

• Whatever the number of users accessing the camera simultaneously, only one user can access the

camera as an administrative user (“admin”).

Note:

Up to 16 users can access the camera simultaneously, however, depending on the environment of use, image and

voice renewal may become slower as the number of connected users increases.

User name Operation privileges Password

(Default value)

guest

Used for general users.

The guest user operation is limited to monitoring the live video. Any operations

on the configuration screens are not allowed.

guest

admin Used for an administrative user.

The administrative user can perform all operations through the Web browser. admin

The number of users who can access simultaneously

English 5

Configuring the TCP/IP Settings on PC

Perform the appropriate TCP/IP settings on your PC in accordance with your operating system.

1In the [Control Panel], click [Network and

Internet Connections].

The [Network and Internet Connections] screen

appears.

2Click [Network Connections].

The [Network Connections] screen appears.

The LAN interface (Ethernet adapter)

configurations appear in the [LAN or High-Speed

Internet] section.

3Right-click on the LAN interface

(Ethernet adapter) configuration used

for accessing the camera and click

[Properties] in the context menu.

[General] tab appears in the [Local Area

Connection 2 Properties] dialog box.

4In the [This connection uses the

following items:] list box, select the

[Internet Protocol (TCP/IP)] check box.

Be sure to confirm that the [Internet Protocol

(TCP/IP)] check box is selected. If the check box

is disabled, select it to enable the option.

Configuring the TCP/IP Settings on PC

6 English

5Click [Properties].

[General] tab appears in the [Internet Protocol

(TCP/IP) Properties] dialog box.

6Select the [Use the following IP

address:] radio button and complete the

[IP address:], [Subnet mask:] and

[Default gateway:] fields.

7Confirm the settings and click the [OK]

button.

This completes the TCP/IP settings. Close all

dialog boxes in the display.

Web browser is required to access the camera. Install

Internet Explorer Ver.6.0 or higher on your PC.

In the cases below, perform the Internet Explorer’s

settings by clicking [Tool] and then [Internet Options].

• When accessing the camera using SSL

encryption for video signal

1Click the [Advanced] tab.

2Make sure that the “Use SSL 2.0” and “Use SSL

3.0” options under the “Security” section are

enabled. If disabled, select the options.

• When the video update is unstable

1Click the [General] tab.

2Under the “Temporary Internet Files” section, click

the [Settings] button.

3In the “Amount of disk space to use:” setting, set the

lower value.

• When the Java Script’s “Run Time Error” is

displayed

1Click the [Advanced] tab.

2Under the “Browsing” section, disable the “Display a

notification about every script error” option.

3Enable the “Disable script debugging” option.

Preparing the Web Browser for Accessing

the Camera

English 7

Accessing the Camera

1Start the Web browser.

To access the camera, Internet Explorer Ver.6.0 or

higher is required.

Note:

When Internet Explorer is used for accessing the

camera, the number of images sent from the

camera may be limited.

2Type the URL for accessing the camera

in the browser’s address bar, and press

[Enter] key.

Type the IP address configured for the camera

following the “http://” characters.

<Example: when the IP address is the factory

setting value>

After accessing the camera, the authentication

dialog appears.

3Complete the [User name] and

[Password] fields, and click the [OK]

button.

When accessing the camera for the first time, use

the factory setting values below. Using these

values, you will be logged in as an administrative

user.

User name: admin

Password : admin

After the values for the “User name” and

“Password” fields are validated, the language

selection screen appears.

4Select the language used for display.

Available languages:

English, French, German, Spanish, Japanese

After selecting the display language, the main

screen appears and the live video from the

camera is displayed in the video display area.

(From the second time onwards, if the language

selection screen is left for longer than 10 seconds,

the last display language is automatically selected

and the main screen appears.)

MEMO:

• After the camera is turned on, it will take

about 1 minute for the camera to be available

for accepting any accesses.

• When you specify the port number for the

camera to a number other than 80, add “:”

(colon) and the port number after the IP

address in specifying the URL.

<Example: when

“50000”

is specified for the port>

http://192.168.0.2:50000/

• When you enable the [SSL] options, type

“https://” instead of “http://” before the IP

address when specifying the URL (see page

17).

Note:

Also while using the supplied “VA-SW3050Lite”

monitoring software or the separately ordered

“VA-SW3050” recorder/player software, you can access

the camera from Web browser simultaneously.

However, when the user who uses the software

performs one of the following actions, other Web-based

concurrent admin users will be disconnected.

• Camera registration

• Alarm settings

Accessing the Camera

8 English

■Accessing the Camera Using the UPnP Connection

When your operating system is Windows XP, you can use the UPnP (Universal Plug and Play)

connection to access the camera.

In the UPnP connection, double-clicking the icon for the camera in the [My Network Places] window will

activate the camera access process. Entering the URL is not required.

●To enable the UPnP component

1In the [Add or Remove Programs] on the Control

Panel, open [Add/Remove Windows Components].

2Select “Networking Services” and click [Details].

3Select the check box for the UPnP component in the

list, and click the [OK] button.

• The UPnP component title in the list should be

either “Universal Plug and Play” or “UPnP User

Interface” depending on your PC.

4After returning to the [Windows Components

Wizard], click the [Next] button.

5After the wizard completes, click the [Finish] button.

●Configuring the UPnP connection

In the [OPTION SETTINGS] screen, set the [UPnP]

option to “ON” (see page 39).

• The factory setting value is “ON”.

●How to access the camera

1Open the [My Network Places] window.

The icon for the camera detected on the network

appears in the window.

2Double-click the icon.

This establishes the connection to the camera, and

the authentication dialog appears.

Display name in the [My Network Places]

window:

SANYO Camera - (camera title)

In the (camera title) section above, the title specified for

the camera in [TITLE] field of the [NETWORK

SETTINGS] screen appears.

English 9

Structure of Main Screen and Function of Each Section

The structure of the main screen partially differs depending on the screen display types (ActiveX/HTML).

Although the HTML screen is the initial display after login, the display type can be switched with the

selection button on the control panel (see page 12).

MEMO:

“ActiveX” is characterized by its higher baud rate, smooth motion in video and reduced file size.

Note:

Do not enable the screensaver while the ActiveX screen is being displayed.

If you encounter any trouble as a result of using screensaver, restart your Web browser.

21 3 54 7 9

HTML screen

ActiveX screen

1 3 5

7962 8

2007/06/08 23:36:25

Other manuals for VA-82LAN

Table of contents

Other Sanyo Camera Accessories manuals

Sanyo

Sanyo KR-1400AE Cadnica User manual

Sanyo

Sanyo Twicell HR-4/3FAUC User manual

Sanyo

Sanyo UR18650H User manual

Sanyo

Sanyo CP-1700SCR Cadnica User manual

Sanyo

Sanyo VA-80BW User manual

Sanyo

Sanyo NBL414R User manual

Sanyo

Sanyo N-220AAAS Cadnica User manual

Sanyo

Sanyo N-20000MC Cadnica User manual

Sanyo

Sanyo Twicell HR-SCC User manual

Sanyo

Sanyo UF383450F User manual

Sanyo

Sanyo CR17450HE-R User manual

Sanyo

Sanyo UF812248P User manual

Sanyo

Sanyo UR-320 User manual

Sanyo

Sanyo UF-1311 User manual

Sanyo

Sanyo Cadnica N-700AACL User manual

Sanyo

Sanyo Twicell HR-4/5FAUP User manual

Sanyo

Sanyo Twicell HF-D4U User manual

Sanyo

Sanyo VA-60H User manual

Sanyo

Sanyo VA-80BP User manual

Sanyo

Sanyo KR-1500AUL Cadnica User manual

Sanyo

Sanyo KR-5000DEL Cadnica User manual

Sanyo

Sanyo UPF385374 User manual

Sanyo

Sanyo VA-PBPELCC User manual

Sanyo

Sanyo UF-811 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions