Sanyo VA-80LAN User manual

INSTRUCTION MANUAL VA-80LAN

Option Board (Network)

English 1

Table of Contents

Table of Contents .............................................................................1

Instruction .........................................................................................2

■System requirements ......................................................................... 2

Flow of Camera Operation through to Network Operation ..........3

■User names and operating privileges ............................................... 3

Configuring the TCP/IP Settings on PC .........................................4

Accessing the Camera .....................................................................6

■Accessing the Camera Using the UPnP Connection

(for Windows XP only) ........................................................................ 7

Monitoring Live Video In The Main Screen ....................................8

Using The Main Screen ....................................................................9

■How To Use the Control Panel .......................................................... 9

■Other operations ............................................................................... 10

Establishing Voice Communication .............................................11

Selecting the Operating Conditions .............................................12

NETWORK SETTINGS ....................................................................13

CLOCK SETTINGS .........................................................................14

E-MAIL SETTINGS ..........................................................................15

IMAGE TRANSFER SETTINGS ......................................................17

■For HTTP connection ....................................................................... 17

■For FTP connection .......................................................................... 18

SCHEDULE SETTINGS ..................................................................21

■SCHEDULE ........................................................................................ 21

■AUTO MODE SCHEDULE ................................................................. 22

■HOLIDAY SETTINGS ......................................................................... 23

AUDIO SETTINGS ...........................................................................24

OPTION SETTINGS ........................................................................25

Changing the Camera Settings .....................................................26

Settings List ....................................................................................27

OpenSSL License ...........................................................................31

Specifications..................................................................................33

2 English

Instruction

This option board (Network) is an extension board that allows you to connect Sanyo’s color CCD camera to your

network.

After installing the option board on the camera, you can view live video from the camera using Web browser on your

PC. If you want to view live videos from multiple cameras, install the supplied “VA-SW3050LITE” monitoring software.

■System requirements

The system requirements for camera operation via network are as follows:

•PC:IBM PC/AT and compatibles

•OS:Windows 2000/Windows XP Home Edition/Windows XP Professional

•CPU:Pentium III (800MHz or higher)

• Memory: 128MB or more

• Network interface: 10Base-T/100Base-TX

• Display card: 1024 x 768 pixels or higher, 16 million colors or higher

• Web browser: Internet Explorer Ver.6.0 or higher

• Voice: Sound card and speakers with 100% DirectX compatibility

Note:

• LAN cable must be CAT-5 or higher, and no more than 100 m (109.4 yds) in length.

• Image may be delayed and/or audio interrupted, depending on the environment of use.

This instruction manual is copyrighted by SANYO Electric Co., Ltd. No materials contained in this manual may be

reproduced in any format without the prior permission of the copyright holder.

Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

The official name for “Windows” used in this manual is Microsoft®Windows®Operating System. In this manual,

note that the word “Windows” refers to both “Microsoft®Windows®2000 Operating System” and “Microsoft®

Windows®XP Operating System”.

Intel and Pentium are registered trademarks or trademarks of Intel Corporation and its subsidiaries in the United

States and other countries.

IBM and IBM PC/AT are trademarks of International Business Machines Corporation.

UPnP is a trademark of UPnP Implementers Corporation, which is established by the UPnP Forum SC.

Java is a trademark of Sun Microsystems, Inc.

All other brands and product names in this manual are the registered trademarks or trademarks of their respective

owners.

English 3

Flow of Camera Operation through to Network Operation

For detailed instructions on individual procedures, refer to the pages shown below.

■User names and operating privileges

Two types of user name shown below can access the camera and are authenticated by password during the login

process.

The operations that the user can perform for the camera depend on the user name used to access the camera.

If a “guest” user tries to perform an operation not included in his privilege, the authentication dialog appears. In this

dialog, entering the user name and password for an administrative user (“admin”) will enable the user to perform all

operations.

The number of users who can access simultaneously

• Up to 16 users can access the camera simultaneously.

• Whatever the number of users accessing the camera simultaneously, only one user can access the

camera as an administrative user (“admin”).

Note:

Up to 16 users can access the camera simultaneously, however, depending on the environment of use, image and

voice renewal may become slower as the number of connected users increases.

1Installing the option board on the camera

Refer to the supplied “INSTALLATION MANUAL” for how to install the option board on the camera and

make connection using LAN cables.

Refer to

2Configuring the TCP/IP settings on PC Page 4

3Accessing the camera

Enter your user name and password to access the camera using the Web browser. Page 6

4Monitoring live video in the main screen

After accessing the camera, the live video will be displayed on the main screen. Page 8

For an administrative user, also perform the following procedures.

5Selecting the operating conditions

Using the [MAIN SETTINGS] screen for an administrative user, configure the detailed

settings for administrative operations.

When you access the camera for the first time, be sure to perform the settings on the

[CLOCK SETTINGS] screen (See page 14).

• You can change the settings stored in the camera remotely through the network

connection (See page 26).

Page 12

guest Used for general access. Operations are limited to monitoring the live video. Any operations on the

configuration screens are not allowed.

admin Used for administrative access. Any camera operations and configurations can be made through the

Web browser.

4 English

Configuring the TCP/IP Settings on PC

Perform the appropriate TCP/IP settings on your PC in accordance with your operating system.

(The following setting example is for Windows XP.)

1In the [Control Panel], click [Network and

Internet Connections].

The [Network and Internet Connections] screen

appears.

2Click [Network Connections].

The [Network Connections] screen appears.

The LAN interface (Ethernet adapter)

configurations appear in the [LAN or High-Speed

Internet] section.

3Right-click on the LAN interface

(Ethernet adapter) configuration used

for accessing the camera and click

[Properties] in the context menu.

[General] tab appears in the [Local Area

Connection 2 Properties] dialog box.

4In the [This connection uses the

following items:] list box, select the

[Internet Protocol (TCP/IP)] check box.

Be sure to confirm that the [Internet Protocol

(TCP/IP)] check box is selected. If the check box

is disabled, select it to enable the option.

Configuring the TCP/IP Settings on PC

English 5

5Click [Properties].

[General] tab appears in the [Internet Protocol

(TCP/IP) Properties] dialog box.

6Select the [Use the following IP

address:] radio button and complete the

[IP address:], [Subnet mask:] and

[Default gateway:] fields.

7Confirm the settings and click the [OK]

button.

This completes the TCP/IP settings. Close all

dialog boxes in the display.

Web browser is required to access the camera. Install

Internet Explorer Ver.6.0 or higher on your PC.

In the cases below, perform the Internet Explorer’s

settings by clicking [Tool] and then [Internet Options].

• When accessing the camera using SSL

encryption for video signal

1Click the [Advanced] tab.

2Make sure that the “Use SSL 2.0” and “Use SSL

3.0” options under the “Security” section are

enabled. If disabled, select the options.

• When the video update is unstable

1Click the [General] tab.

2Under the “Temporary Internet Files” section, click

the [Settings] button.

3In the “Amount of disk space to use:” setting, set the

lower value.

• When the Java Script’s “Run Time Error” is

displayed

1Click the [Advanced] tab.

2Under the “Browsing” section, disable the “Display a

notification about every script error” option.

3Enable the “Disable script debugging” option.

Preparing the Web Browser for Accessing

the Camera

6 English

Accessing the Camera

1Start the Web browser.

To access the camera, Internet Explorer Ver.6.0 or

higher is required.

Note:

When Internet Explorer is used for accessing the

camera, the number of images sent from the

camera may be limited.

2Type the URL for accessing the camera

in the browser’s address bar, and press

[Enter] key.

Type the IP address configured for the camera

following the “http://” characters.

<Example: when the IP address is the factory

setting value>

After accessing the camera, the authentication

dialog appears.

3Complete the [User name] and

[Password] fields, and click the [OK]

button.

When accessing the camera for the first time, use

the factory setting values below. Using these

values, you will be logged in as an administrative

user.

User name: admin

Password : admin

After the values for the “User name” and

“Password” fields are validated, the language

selection screen appears.

Note:

For security reasons, change the password

regularly.

To change the password, use the [NETWORK

SETTINGS] screen (see page 13).

4Select the language used for display,

and click the [SET] button.

Available languages:

English, French, German, Spanish, Japanese

After selecting the display language, the main

screen appears and the live video from the

camera is displayed in the video display area.

(From the second time onwards, if the language

selection screen is left for longer than 10 seconds,

the last display language is automatically selected

and the main screen appears.)

MEMO:

• After the camera is turned on, it will take

about 1 minute for the camera to be available

for accepting any accesses.

• When you specify the port number for the

camera to a number other than 80, add “:”

(colon) and the port number after the IP

address in specifying the URL.

<Example: when

“81”

is specified for the port>

http://192.168.0.2:81/

• When you enable the [SSL] options, type

“https://” instead of “http://” before the IP

address when specifying the URL (see page

13).

Note:

Also while using the supplied “VA-SW3050LITE”

monitoring software or the separately ordered

“VA-SW3050” recorder/player software, you can access

the camera from Web browser simultaneously.

However, when the user who uses the software

performs one of the following actions, other Web-based

concurrent admin users will be disconnected.

• Camera registration

• Alarm settings

Accessing the Camera

English 7

■Accessing the Camera Using the UPnP Connection (for Windows XP only)

When your operating system is Windows XP, you can use the UPnP (Universal Plug and Play)

connection to access the camera.

In the UPnP connection, double-clicking the icon for the camera in the [My Network Places] window will

activate the camera access process. Entering the URL is not required.

●To enable the UPnP component

1In the [Add or Remove Programs] on the Control

Panel, open [Add/Remove Windows Components].

2Select “Networking Services” and click [Details].

3Select the check box for the UPnP component in the

list, and click the [OK] button.

• The UPnP component title in the list should be

either “Universal Plug and Play” or “UPnP User

Interface” depending on your PC.

4After returning to the [Windows Components

Wizard], click the [Next] button.

5After the wizard completes, click the [Finish] button.

●Configuring the UPnP connection

In the [OPTION SETTINGS] screen, set the [UPnP]

option to “ON” (see page 25).

• The factory setting value is “ON”.

●How to access the camera

1Open the [My Network Places] window.

The icon for the camera detected on the network

appears in the window.

2Double-click the icon.

This establishes the connection to the camera, and

the authentication dialog appears.

Display name in the [My Network Places]

window:

SANYO Camera - (camera title)

In the (camera title) section above, the title specified for

the camera in [TITLE] field of the [NETWORK

SETTINGS] screen appears.

Click “Yes” to allow installation of the “ActiveX control”,

which is necessary for the voice function.

MEMO:

• If the attempt to install “ActiveX control” fails,

try again after selecting [Tools] →[Internet

Options] →[Security] tab from the Internet

Explorer and changing the security level to

“Medium” or lower.

• If using WindowsXP SP2, the popup blocker

may be displayed.

Click the information bar to display the popup

block permission menu, then click either

“Temporarily Allow Pop-ups” or “Always Allow

Pop-ups from This Site…”.

If the Security Warning screen

appears

8 English

Monitoring Live Video In The Main Screen

1Control Panel (See pages 9 - 10)

Used to perform remote operation of the camera.

2Camera title (See page 13)

The camera title specified in the [NETWORK

SETTINGS] screen is displayed.

The color of the title changes according to the status

of alarm detection.

MEMO:

• When the camera title is in orange, no other

alarms will be processed. When the alarm image

has been sent or the condition that the alarm

image cannot be sent lasts longer than five

minutes, the camera title returns to normal

display (white).

• When the setting for the camera title is blank, the

letters “ALARM” are displayed (in red or orange).

3Video display area

The live video from the camera is displayed.

4DATE (See page 14)

The date and time specified in the [CLOCK

SETTINGS] screen is displayed.

5Capture button (See page 10)

Displays the still image in a separate window.

6Voice control buttons (See page 11)

Allows you to enable or disable the voice

input/output (send/receive ON/OFF)

respectively as well as adjust the volume.

7Remote alarm button (See page 10)

Used to control the alarm output from the camera

remotely.

8Close button

Click this button to terminate the connection to the

camera and close the screen.

261 3 54 7 8

White Normal

Red While alarm is detected or during

recording

Orange

While sending or waiting for sending the

alarm image recorded on the camera to

the VA-SW3050 (HTTP) or FTP server

(FTP)

English 9

Using The Main Screen

■How To Use the Control Panel

Operations in the control panel are limited to an administrative user (admin).

Control Panel

1Camera control buttons

2ZOOM

The slide bar is used to select the desired zoom magnification.

In addition, clicking the (WIDE)/ (TELE) button allows

you to select desired zoom magnification. Pressing and holding

the (WIDE)/ (TELE) button consecutively changes the

zoom magnification.

MEMO:

When the electronic zoom function (EL ZOOM) is enabled on the

camera and the zoom magnification reaches the maximum value

of optical zoom (x30), clicking the button further activates

the electronic zoom function.

3RESOLUTION

Specifies the video resolution at seven levels.

MEMO:

The DFFC (Dynamic Field/Frame Conversion) function detects

movements in the object according to changes in brightness and

automatically switches from frame to field mode. When the field

mode is switched to, vertical resolution deteriorates to some

degree, however, there is less jaggedness of moving object's

edge.

(If the change in brightness is too small, DFFC may not

function.)

Changes the camera orientation toward the

direction indicated by arrow mark.

(The camera control buttons cannot be

operated while the camera configuration

menu is displayed.)

• Clicking the video image changes the

camera’s orientation so that the point

where you click is located at the

center of the image.

Scans the monitored area end to end

vertically or horizontally for respective

buttons, and stops at the current camera

position.

Starts the sequence, auto-panning, or tour

action, respectively.

Performs the one-push auto focus function.

Displays the on-screen camera configuration

menu.

Displays the next screen of the configuration

menu or executes the command.

Other manuals for VA-80LAN

Table of contents

Other Sanyo Camera Accessories manuals

Sanyo

Sanyo CR15270 User manual

Sanyo

Sanyo UPF383450 User manual

Sanyo

Sanyo Twicell HR-AAU User manual

Sanyo

Sanyo Twicell HR-AAAU User manual

Sanyo

Sanyo NBL414R User manual

Sanyo

Sanyo CR17450HE-R User manual

Sanyo

Sanyo N-20000MC Cadnica User manual

Sanyo

Sanyo Cadnica N-6PT User manual

Sanyo

Sanyo VA-80BW User manual

Sanyo

Sanyo Twicell HR-AA User manual

Sanyo

Sanyo UF553443F User manual

Sanyo

Sanyo Cadnica N-3000CR User manual

Sanyo

Sanyo KR-4400D Cadnica User manual

Sanyo

Sanyo N-1U Cadnica User manual

Sanyo

Sanyo eneloop MDR03-U-2-3UTG User manual

Sanyo

Sanyo N-270AA Cadnica User manual

Sanyo

Sanyo Cadnica KR-1200AUL User manual

Sanyo

Sanyo N-110AA Cadnica User manual

Sanyo

Sanyo Twicell HR-4/5AU User manual

Sanyo

Sanyo CR17335 User manual

Sanyo

Sanyo N-1250SCRL Cadnica User manual

Sanyo

Sanyo Cadnica KR-2000C User manual

Sanyo

Sanyo UF553443R User manual

Sanyo

Sanyo Twicell HF-C1U User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions