Sanus FSF110 User manual

FSF110

INSTRUCTION MANUAL

Our US-based

install experts

are standing

by to help.

Call us at:

888-333-9952

Or, chat at:

SANUS.com/chatSV

Get it right the

ﬁrst time.

HeightFinder™

shows you

where to drill.

Check it out at:

SANUS.com/1171

Want to watch

a video that

shows how

easy this DIY

project will be?

Watch it now at:

SANUS.com/2772

WE’RE HERE TO HELP

4K HDMI

Cable

BONUS!

50 lb

(22.67 kg)

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 20

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.Sanus.com or call

Customer Service to ﬁnd a compatible mount.

Do you have

all the tools

needed?

What is your

wall made of?

Ready to begin?

Does your TV

(including accessories)

weigh more than

50 lb (22.67 kg)?

Drywall with

wood studs?

Solid concrete or

concrete block?

Perfect!

Unsure?

Call Customer Service

Requires Concrete kit CMK1 (not included)

CAUTION:

DO NOT

install into

drywall alone

Wood Stud Install

Concrete Install

Awl

Pencil Level Stud Finder

Screwdriver

Tape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric

Drill Hammer

1/2 in.

(13 mm)

Socket

Wrench Drill Bit

3/8 in.

(10 mm)

Concrete

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service.

CAUTION: Avoid potential personal injury or property damage!

●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

●This product is designed for INDOOR USE ONLY

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Before getting started, let’s make sure this mount is perfect for you!

2.95

[75.0]

3.94

[100.0]

2.95

75.0

3.94

100.0

7.87

200.0

7.87

200.0

10.42

264.8

6.40

162.5

16° 16°

0.86

21.9

OFFSET

3.16

80.3

8.50

215.9

3.03

77.0

3° ROLL LEFT

3° ROLL RIGHT

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

in.

[mm]

Dimensions

M4 x 8mm

M4 x 12mm

M6 x 12mm

M4 x 35mm

M6 x 35mm

M8 x 20mm

M4 M6/M8

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to

your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

STEP 1 Parts and Hardware

TV Screws

Washers

Spacers

09 10

x4 x4

22 mm

TV Bracket

Extenders

TV Bracket

Extender

Screws

02 03 x8

01 x1

THIS WAY UP

5/16 x 2 ½ in. 8-32 in.

8-32 x 3⁄8 in.

7/32 in.

5/16 x 2¾ in.

Fischer UX10 x 60R Anchor

STEP 2 Parts and Hardware STEP 3 Hardware

Additional Hardware

Wall Plate

Assembly

Wall Plate Template

Lag Bolts

14 x2

13 x1

15 x1

Washer

Hex Key

Cable Ties

Locking Screw

STEP 2B: CONCRETE INSTALLATIONS

Concrete Installation Kit CMK1

[NOT INCLUDED]

Lag Bolt

Concrete Anchor C2 x2

C1 x2

Contact Customer Service to inquire

about the addition hardware.

M4/M5 WASHER

Qty 4

M6/M8 WASHER

Qty 4

SPACER

Qty 4

M4 x 12mm SCREW

Qty 4

M8 x 20mm SCREW

Qty 4

M4 x 35mm SCREW

Qty 4

M5 x 12mm SCREW

Qty 4

M5 x 35mm SCREW

Qty 4

M8 x 35mm SCREW

Qty 4

M6 x 12mm SCREW

Qty 4 M6 x 35mm SCREW

Qty 4

M4/M5 M6

M4 x 12mm

M6 x 12mm

M4 x 35mm

M6 x 35mm

M6 x 20mm

M5 x 12mm

M6 x 12mm

M5 x 35mm

M4 x 8mm

M6 x 14mm

1/4 x 2 ½ in.

inches

STEP 1 Attach TV Bracket to TV

These smaller hole patterns only use TV bracket 01 .

Do not use the four TV bracket extenders 02 and eight screws 03 .

75 x 75

100 x 100

100

1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket

Measure the width and height of your TV hole pattern in mm.

Record your measurements:

Determine which TV bracket configuration to use, A, B, or C

based on your TV hole pattern measurements.

75 mm = 7.5 cm = 3 in.

100 mm = 10 cm = 4 in.

200 mm = 20 cm = 7 7/8 in.

inches

xHeight

Width mm mm

inch dimensions approximate

Dimensions in mm

TV Hole Pattern

Measurement

Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.

Secure using eight screws 03 in the corner holes shown.

Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.

Secure using eight screws 03 in the corner holes shown.

200 x 200 200 x 100

200

100

Dimensions in mm Dimensions in mm

TV Hole Pattern

Measurement TV Hole Pattern

Measurement

M6 M8

FLAT BACK ROUND BACK CABLES

Too Short

Correct

Too Long

INSET HOLES

1.3 Select TV Screw Diameter 1.4 Select TV Screw Length

If your TV has a flat back, use the shorter screws.

Spacers and longer screws are supplied to accommodate:

●irregular / round back TVs

●TVs with inset mounting holes

●extra space needed for cables

Hand thread screws into the threaded inserts

on the back of your TV to determine which

screw diameter (M4, M6 or M8) to use.

CAUTION:

Verify adequate thread

engagement with the screw or

screw/spacer combination.

-Too short will not hold the TV.

-Too long will damage the TV.

If your TV included

spacers or wall mount

adapters, see

Troubleshooting

on PAGE 19.

Flat Back

Round Back / Extra Space

1.5 Attach TV Bracket

Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level.

Install using either the screw/washer (Flat Back) or screw/washer/spacer (Round Back / Extra Space)combination you selected for your TV.

IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.

NOTE: For 200 x 200 or

200 x 100 hole patterns, you may

need to loosen the screws 03 to

align the bracket extenders 02 .

After bracket extenders 02 are

secured to the back of your TV,

re-tighten screws 03 .

TV Bracket Conﬁgurations Band C

(from page 7)

Conﬁguration B Illustrated, with spacers

TV Bracket Conﬁguration A

(from page 6)

Illustrated with spacers

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the wall plate template 12 at your desired height and line up the holes with your stud center line. Level the template and tape in place.

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 12 .

IMPORTANT: Be sure to drill into the center of the stud.

IMPORTANT: Pilot holes must be drilled to a depth of 2½ in. (63.5 mm).

THIS WAYUP

STEP 2A Attach Wall Plate Wood Stud Installation

THIS WAY UP

THIS WAYUP

12 12

≤ 16 mm

(5/8 in.)

NOTE: TV shifts 21.9 mm (7/8 in.) to the right

or left when in the home position. Consider this when

selecting the location of your wall mount.

CAUTION: Avoid potential personal injury or property damage!

●Drywall covering the wall must not exceed 5/8 in. (16 mm)

●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)

2½in. (63.5 mm)

7/32 in.

(5.5 mm)

Table of contents

Languages:

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 