Samsung WF7 Series User manual

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive a more complete service,

please register your product at

www.samsung.com/global/register

WF7704NA(W/V/S/C/R)

WF7702NA(W/V/S/C/R)

WF7700NA(W/V/S/C/R)

WF7708NA(W/V/S/C/R)

WF7604NA(W/V/S/C/R)

WF7602NA(W/V/S/C/R)

WF7600NA(W/V/S/C/R)

WF7608NA(W/V/S/C/R)

WF7522NA(W/V/S/C/R)

WF7520NA(W/V/S/C/R)

WF7528NA(W/V/S/C/R)

WF7704NAW-02450Q_EN.indd 1 2007-09-07 ¿ÀÈÄ 5:21:30

2_ Safety information

safety information

Throughout this manual, you’ll see Warning and Caution notes.

These warnings, cautions, and the important safety instructions that follow do

not cover all possible conditions and situations that may occur.

It’s your resposibility to use common sense, caution, and care when installing,

maintaining, and operation your washer. Samsung is not liable for damages

resulting from improper use.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual means:

WARNING

Hazards or unsafe practices that may result in severe personal injury or

death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or

property damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when

using your washer, follow these basic safety precautions:

BEFORE USING THE APPLIANCE

Packing materials can be dangerous to children; keep all packing material (plastic bags,

polystyrene, etc.) well out of the reach of children.

The appliance is designed for home use only.

Make sure that water and electrical connections are made by qualified technicians,

observing the manufacturer’s instructions (see “Installing the Washing Machine”) and local

safety regulations.

All packaging and shipping bolts must be removed before the appliance is used. Serious

damage may occur if they are not removed. See “Removing the shipping bolts”.

Before washing clothes for the first time, you must run a complete cycle without clothes.

See “Washing for the first time”.

SAFETY INSTRUCTIONS

Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet

or set the (On/Off ) button to Off.

Make sure that the pockets of all clothing to be washed are empty.

Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause

extensive damage to the appliance.

Always unplug the appliance and turn off the water after use.

Before you open the door of the appliance, check that the water has drained. Do not open

the door if you can still see water.

Pets and small children may climb into the appliance. Check the appliance before each use.

CAUTION

WARNING

WF7704NAW-02450Q_EN.indd 2 2007-09-07 ¿ÀÈÄ 5:21:30

Safety information _3

The glass door becomes very hot during the washing cycle. Keep children away from the

appliance while it is in use.

Do not attempt to repair the appliance yourself. Repairs made by inexperienced or

unqualified persons may cause injury and/or make more serious repairs to the appliance

necessary.

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its

service agent or a similar qualified person in order to avoid a hazard.

This appliance should only be serviced by an authorized service center, and only genuine

spare parts should be used.

This appliance is not intended for use by young children or infirm persons unless they

have been adequately supervised by a responsible person to ensure that they can use the

appliance safely. Young children should be supervised to ensure that they do not play with

the appliance.

This appliance has to be connected to the plug endurable to proper power consumption.

This appliance has to be positioned so that the plug is accessible after installation.

Do not use processed water containing oil, cream or lotion, which is usually found in skin-

care shops or massage clinics.

• Otherwise this will cause the packing to be deformed, which causes a malfunction or

water leak.

A stainless washing tube does not usually rust. However if some metal such as a hair pin is

left in the tube for an extended time, the tube could rust.

• Do not leave water or bleach containing chlorine in the tube for an extended period of

time.

• Do not regularly use or leave water containing iron in the tube for an extended period of

time.

• If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to

the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a

metal brush)

For washing machines with ventilation openings in the base, that a carpet must not

obstruct the openings.

Use the new hose-sets and old hose-sets should not be reused.

This marking shown on the product or its literature, indicates that it should not be disposed

with other household wastes at the end of its working life. To prevent possible harm to

the environment or human health from uncontrolled waste disposal, please separate this

from other types of wastes and recycle it responsibly to promote the sustainable reuse

of material resources. Household users should contact either the retailer where they

purchased this product, or their local government office, for details of where and how they

can take this item for environmentally safe recycling. Business users should contact their

supplier and check the terms and conditions of the purchase contract. This product should

not be mixed with other commercial wastes for disposal.

WF7704NAW-02450Q_EN.indd 3 2007-09-07 ¿ÀÈÄ 5:21:31

4_ Contents

contents

INSTALLING THE WASHING

MACHINE

5 Unpacking the Washing Machine

5 Overview of the washing machine

5 Selecting a location

6 Adjusting the leveling feet

6 Removing the shipping bolts

6 Connecting the water supply hose

7 Positioning the drain hose

7 Plugging in the machine

WASHING A LOAD OF LAUNDRY

8 Overview of the control panel

9 Washing for the first time

9 Putting detergent in the washing machine

10 Washing clothes manually

10 Selecting options

11 Washing tips and hints

MAINTAINING THE WASHING

MACHINE

12 Repairing a frozen washing machine

12 Cleaning the exterior

13 Cleaning the debris filter

13 Cleaning the water hose mesh filter

TROUBLESHOOTING

14 Problems and solutions

15 Understanding error messages

PROGRAMME CHART

16 Programme chart

APPENDIX

17 Fabric care chart

17 Electrical warnings

17 Protecting the environment

18 Declaration of conformity

18 Specification

WF7704NAW-02450Q_EN.indd 4 2007-09-07 ¿ÀÈÄ 5:21:31

Installing the washing machine _5

installing the washing machine

UNPACKING THE WASHING MACHINE

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received

all of the items shown below. If the washing machine was damaged during shipping or you do not have all

of the items, contact your Samsung dealer immediately.

OVERVIEW OF THE WASHING MACHINE

Wrench Cold Hot(option)

Water supply hose

Hose guide Bolt hole covers

SELECTING A LOCATION

Before you install the washing machine, select a location with the following characteristics:

• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)

• Away from direct sunlight.

• Adequate ventilation

• Room temperature that will not fall below 0˚C

• Away from sources of heat such as coal or gas Make sure that the washing machine does

not stand on its power cord. Ventilation openings must not be obstructed by carpeting when

the washing machine is installed on a carpeted floor.

01 Installing the washing machine

Cover top

Drain Hose

Plug

Base cover

Adjustable feet

Detergent drawer

Control panel

Door

WF7704NAW-02450Q_EN.indd 5 2007-09-07 ¿ÀÈÄ 5:21:33

6_ Installing the washing machine

ADJUSTING THE LEVELING FEET

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the

feet):

1. Loosen the leg bolt by turning it with your hand until it is at

the desired height.

2. Tighten the locking nut by turning it with the wrench.

• Place the washer on a sturdy, flat surface.

If the washer is placed an uneven or weak surface, noise

or vibration occurs. (Only a 1 degrees angle is allowed.)

REMOVING THE SHIPPING BOLTS

Before using the washing machine, you must remove all of the shipping bolts from the back of

the unit. To remove the bolts:

1. Loosen all bolts with the wrench before removing them.

2. Take each bolt head and pull it through the wide part of the

hole.

Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Keep the shipping bolts for future use.

CONNECTING THE WATER SUPPLY HOSE

The water supply hose must be connected to the washing machine at one end and to the water

faucet at the other.

Do not stretch the water supply hose. If the hose is too short and you do not wish to move the

water faucet, replace the hose with a longer, high pressure hose.

To connect the water supply hose:

1. Take the L-shaped arm fitting for the cold water supply hose

and connect to the cold water supply intake on the back of

the machine. Tighten by hand.

2. Connect the other end of the cold water supply hose to your

sink’s cold water faucet and tighten it by hand.

If necessary, you can reposition the water supply hose at the

washing machine end by loosening the fitting, rotating the

hose, and retightening the fitting.

installing the washing machine

rpm

Min

Fuzzy control

Temp Spin Delay Start Function

Door open

Power

Spin

Check

Remaining Time

Delay Start

Rinse

Wash

Pre-wash

Eco

Speedy

Wool

Delicate

Synthetic

Cotton

START

PAUSE

12:00

WF7704NAW-02450Q_EN.indd 6 2007-09-07 ¿ÀÈÄ 5:21:34

Installing the washing machine _7

POSITIONING THE DRAIN HOSE

The end of the drain hose may be positioned in three ways:

Over the edge of a sink

The drain hose must be placed at a height of between 60 and

90 cm. To keep the drain hose spout bent, use the supplied

plastic hose guide. Secure the guide to the wall with a hook or

to the faucet with a piece of string to prevent the drain hose

from moving.

ln a sink drain pipe branch

The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm

above the ground.

ln a drain pipe

Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm

and no longer than 90 cm.

PLUGGING IN THE MACHINE

You MUST ground the plug of the washing machine.

Check with a licensed electrician before using the machine to make sure it is properly grounded.

01 Installing the washing machine

WF7704NAW-02450Q_EN.indd 7 2007-09-07 ¿ÀÈÄ 5:21:35

8_ Washing a load of laundry

washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

 This is a general manual. The INLAY system may be different from that of the product you purchased.

For ( A ), see item 4 below to select the right specifications that match your product.

Display panel

Displays wash cycle and error messages.

During execution of the program, the program indicator blinks.

Program Select

button

Press the button repeatedly to select one of the six available wash program.

Cotton  Baby Cotton  Synthetics  Handwash  Wool  Quick Wash

 Rinse+Spin  Spin

Temp selection

button

Press the button repeatedly to cycle through the available water temperature

options (cold water, 30˚C, 40˚C , 60˚C and 95˚C).

When pressing this button during washing, you can see the selected

temperature in the display panel.

Spin selection

button

Press the button repeatedly to cycle through the available spin speed options.

WF7704NA, WF7604NA no spin ( ), 400, 800, 1400 rpm

WF7702NA, WF7602NA, WF7522NA no spin ( ), 400, 800, 1200 rpm

WF7700NA, WF7600NA, WF7520NA no spin ( ), 400, 800, 1000 rpm

WF7708NA, WF7608NA, WF7528NA no spin ( ), 400, 800, 800+ rpm

Function button

Press the button repeatedly to cycle through the available partial wash options.

Easy Iron  Rinse Hold  Rinse+  Prewash  Easy Iron + Rinse Hold 

Easy Iron + Rinse+  Easy Iron + Prewash  Rinse+ + Prewash  Easy Iron

+ Rinse+ + Prewash

Prewash is only available when washing cotton, Baby Cotton or synthetics.

According to selected course, there are unselected functions.

Delay End

selection button

Press this button repeatedly to rotate between the retarded start options

available. (from 3 Hours to 24 Hours, in 1 hour increments)

Start/Pause

button

Press to pause and restart programs.

(On/Off) button

Press once to turn the washing machine on, press again to turn the washing

machine off.

If the washing machine power is left on for longer than 10 minutes without

any buttons being touched, the power automatically turns off.

WF7704NAW-02450Q_EN.indd 8 2007-09-07 ¿ÀÈÄ 5:21:37

Washing a load of laundry _9

What is the “Child Lock” function?

• If you press the “Child Lock” button(Spin+Function button) longer than 2 sec during operation,

this function is selected.

• If once this function is selected, no change can be done until the end of laundry.

• Press the “Child Lock” button(Spin+Function button) longer than 2 sec to cancel the function.

WM STOPS THE CURRENT STEP OF THE CYCLE OR DOES NOT

PROCEED TO THE NEXT STEP OF WASHING (INDICATION OF

REMAIN TIME ON LED DISPLAY MAY INCREASE).

Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of

water and other parameters of washing, but also controls the washing process as well as makes necessary

corrections in order to provide better washing results. In the above- mentioned matter, the Fuzzy Logic

system has detected deviations in washing cycle such as: high quantity of detergent at the end of the

cycle, high vibration level while spinning, etc.You can adjust existing wash programs, i.e. change wash

temperature and spin speed. After detection of such abnormalities, the washing machine is suspending

the normal course of program in order to normalize these parameters and continue the cycle. Fuzzy logic

system makes 7 attempts to eliminate such deviations. If it is impossible to normalize the above mentioned

deviations by Fuzzy Logic system, you will see the corresponding indication on LED lamps. (see chapter

“Troubleshooting”) The operation of Washing machine that corresponds to above- mentioned scheme is

considered to be normal.

WASHING FOR THE FIRST TIME

Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:

1. Press the (On/Off ) button.

2. Pour a little detergent in the detergent drawer .

3. Turn on the water supply to the washing machine.

4. Press the Temp button repeatedly until 40˚C is displayed.

5. Press the Start/Pause button.

This will remove any water from the manufacturer’s test run remaining in the machine.

PUTTING DETERGENT IN THE WASHING MACHINE

1. Pull out the detergent drawer.

2. Add laundry detergent into compartment .

3. Add softener into compartment (if you desire).

4. Add prewash detergent into compartment (if you desire).

02 Washing a load of laundry

WF7704NAW-02450Q_EN.indd 9 2007-09-07 ¿ÀÈÄ 5:21:40

10_ Washing a load of laundry

WASHING CLOTHES MANUALLY

You can wash clothes manually without using the Fuzzy Logic feature. To do so:

1. Turn on the water at the water source sink.

2. Press the (On/Off ) button on the washing machine.

3. Open the door.

4. Load the articles one at a time loosely into the drum, without overfilling.

5. Close the door.

6. Put the detergent in the detergent drawer .

7. Repeatedly press the Program button to select the cycle you prefer:

Cotton, Baby cotton, Synthetics, and Quick wash...

8. Press the Spin button to select the spin speed (No Spin, 400, 800,...,No Spin,...)

9. Repeatedly press the Function button to select the cycle you prefer (Prewash, Rinse+, Rinse

hold, ... )

10. Press the Temp button to select the temperature (cold water , 30˚C, 40˚C, 60˚C, 95˚C).

11. Press the Start/Pause button and the machine will begin the cycle.

When the cycle is finished:

1. Open the door.

The door will not open until 3 minutes after the machine stops or the power turns off.

2. Remove laundry.

The Slow rotation of drum is not fail of the machine after the last spin of Cotton, Baby

cotton or Quick wash course. That is a function to remove laundry easily.

SELECTING OPTIONS

Prewash

Prewash is only available when washing cotton, Baby cotton, synthetics, delicate clothes. To use

prewash:

1. Load the prewash detergent into compartment of the detergent drawer.

2. Select “Cotton”, ”Baby cotton” or ”Synthetics” with the Program select button.

3. Press the Function button until the “Prewash” indicator lights up on the control panel.

4. Press Start/Pause to begin the cycle.

Rinse+

Your machine will run through an additional rinsing cycle.

The washing duration will be prolonged accordingly.

Rinse Hold

The laundry remains soaking in the final rinse water.

Before the laundry can be unloaded, the “Spin” program must be run.

washing a load of laundry

WF7704NAW-02450Q_EN.indd 10 2007-09-07 ¿ÀÈÄ 5:21:40

This manual suits for next models

Table of contents

Languages:

Other Samsung Washer manuals

Samsung

Samsung WA166DRHD Series User manual

Samsung

Samsung WF1804WPN2/XEU Original instructions

Samsung

Samsung WT75H3200MG/TC User manual

Samsung

Samsung WF42H5200AW User manual

Samsung

Samsung WF42H5200A User manual

Samsung

Samsung DC68-02154A User manual

Samsung

Samsung WA55A7300AE/US User manual

Samsung

Samsung WF702W2 Series User manual

Samsung

Samsung WD0702RE User manual

Samsung

Samsung WA75K2 User manual

Samsung

Samsung WF365BTB series User manual

Samsung

Samsung B1076 User manual

Samsung

Samsung WF80F5E5U User manual

Samsung

Samsung WD7 T Series User manual

Samsung

Samsung WW80J4 series User manual

Samsung

Samsung WD21T6500 Series User manual

Samsung

Samsung WA45N7150A series Manual

Samsung

Samsung WA55A7700A Series User manual

Samsung

Samsung J1043 User manual

Samsung

Samsung WA45K7600A series User manual

Samsung

Samsung WW90J5 Series User manual

Samsung

Samsung SWT58H0 User manual

Samsung

Samsung WW9 J5 6 Series User manual

Samsung

Samsung Q125 Series User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide