Samsung SyncMaster 400TXn User manual

Install Programs PDF Manuals Registration Safety Instructions

Introduction

Connections

Using the Software

Adjusting the Monitor

Troubleshooting

Specifications

Information

Appendix

Model

Select Language

SyncMaster 400TXn

Select Language Main Page

Model

The color and appearance of the product may vary depending on the model, and the product specifications are

subject to change without prior notice for reasons of performance enhancement.

Safety Instructions

Notational

Please read the following safety instructions as they are designed to prevent damage to property and

harm to the user.

Warning / Caution

Failure to follow directions noted by this symbol could result in bodily harm or damage to the

equipment.

Notational Conventions

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Ground to prevent an electric shock

Power

When not used for an extended period of time, set your computer to DPM S.

If using a screen saver, set it to active screen mode.

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet

hands.

zThis may cause electric shock or fire.

Safety Instructions

Notational

Power

Installation

Clean

Oth ers

Introduction

Connections

Using the Software

Adjusting the LCD Display

Troubleshooting

Specifications

Information

Appendix

Use only a properly grounded plug and receptacle.

n improper ground may cause electric shock or equipment damage.

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects

upon them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Do not disconnect the power cord while using the LCD Display.

zA surge may be caused by the separation and may damage the LCD

Display.

Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry cloth.

zUsing the power cord with a dusty plug or connector may cause an electric

shock or fire.

Installation

Be sure to contact an authorized the Service Center, when installing your LCD Display in a location

with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and

where it operates for 24 hours such as at airports, train stations etc.

Failure to do so may cause serious damage to your LCD Display.

Place your LCD Display in a location with low humidity and a

minimum of dust.

zFailure to do so may cause electric shock or fire inside the LCD Display.

Do not drop the LCD Display when moving it.

zThis may cause damage to the product or the person carrying it.

Install the LCD Display base in a showcase or shelf so that the end

of the base does not protrude from the showcase or shelf.

zDropping the product may cause damage to the product or the person

carrying it.

Do not place the product on an unstable or small surface area.

zPlace the product on an even and stable surface ,as the product may fall

and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

zTake care, as someone, specifically children may trip over it.

Keep any flammable objects such as candles, insecticides or

cigarettes away from the product.

zOtherwise, this may cause fire.

Keep any heating devices away from the power cable.

zA melted coating may cause electric shock or fire.

Do not install the product in places with poor ventilation, for

instance, a bookshelf, closet, etc.

zAny increase in the internal temperature may cause fire.

Put down the LCD Display carefully.

zFailing to do so may damage the LCD Display.

Do not place the LCD Display face down.

zThis may damage the TFT-LCD surface.

The installation of the bracket must be done by a qualified

professional.

zInstalling the bracket by unqualified personnel may result in injury.

zAlways use the mounting device specified in the owner's manual.

When installing the product, make sure to keep it away from the wall

(more than 10 cm / 4 inches) for ventilation purposes.

zPoor ventilation may cause an increase in the internal temperature of the

product, resulting in a shortened component life and degraded

performance.

Keep the plastic packaging (bag) out of children's reach.

zThe plastic packaging (bag) may cause suffocation if children play with it.

Clean

When cleaning the LCD Display case or the surface of the TFT-LCD screen, wipe with a slightly

moistened, soft fabric.

Do not spray water or detergent directly onto the LCD Display.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean

it properly using a dry cloth.

zA dirty connector may cause electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

zOtherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product

using a soft, dry cloth.

zDo not use any chemicals such as wax, benzene, alcohol, thinners,

insecticide, air freshener, lubricant or detergent.

Contact the SAMSUNG customer care center or Customer Center for

interior cleaning once a year.

zKeep the product's interior clean. Dust which has accumulated in the

interior over an extended period of time may cause a malfunction or fire.

Others

Do not remove the cover (or back).

zThis may cause electric shock or fire.

zRefer to a qualified servicing company.

If your LCD Display does not operate normally - in particular, if there

is any unusual sound or smell coming from the LCD Display -

unplug it immediately and contact an authorized dealer or the

Service Center.

zThis may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or

moisture; do not install inside a vehicle.

zThis may cause a malfunction, electric sho ck or fire.

zIn particular, avoid operating the LCD Display near water or outdoors where

the LCD Display could be exposed to snow or rain.

If the LCD Display is dropped or the casing is damaged, turn the

LCD Display off and unplug the power cord. Then contact the

Service Center.

zThe LCD Display may malfunction, causing electric shock or fire.

Disconnect the plug from the outlet during storms or lightning or if

it is not used for a long period of time.

zFailure to do so may cause electric shock or fire.

Do not try to move the LCD Display by pulling only the wire or the

signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not move the LCD Display right or left by pulling only the wire or

the signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not cover the vents on the LCD Display cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal

objects on the LCD Display.

zThis may cause a malfunction, electric sho ck or fire.

zIf a foreign substance enters the LCD Display , unplug the power cord and

contact the Service Center.

Keep the product away from combustible chemical sprays or

inflammable substances.

zThis may cause an explosion or fire.

Never insert anything metallic into the LCD Display openings.

zThis may cause electric shock, fire or injury.

Do not insert metal objects such as chopsticks, wire and tools or

inflammable objects such as paper or matches into the vent,

headphone port or AV ports or etc.

zThis may cause electric shock or fire. If an alien substances or water enters

the product, turn the product off, unplug the power connector from the wall

outlet and contact the Service Center.

When viewing a fixed screen for an extended period of time, residual

image or blurriness may appear.

zChange the mode to energy saving mode or set a screensaver to a

changing picture when away from the LCD Display for an extended period

of time.

Adjusts the resolution and frequency to the level appropriate for the

model.

zAn inappropriate resolution may cause undesirable picture quality.

32 inch (80 cm) - 1360 X 768

Viewing the LCD Display continuously at a too close angle may

result in damage to your eyesight.

To ease eye strain, take at least a five-minute break after every hour

of using the LCD Display.

Do not install the product on an unstable, uneven surface or a

location prone to vibrations.

zDropping the product may cause damage to the product or the person

carrying it. Using the product in a location prone to vibrations may shorten

the lifetime of the product or may cause the product to catch fire.

When moving the LCD Display , turn off and unplug the power cord.

Make sure that all cables, including the antenna cable and cables

connected to other devices, are disconnected before moving the

LCD Display.

zFailure to disconnect cables may damage it and cause fire or electric

shock.

Make sure there are more than two people when moving the

product.

zDropping the product may cause a malfunction or injury to the person

carrying it.

Place the product out of children’s reach, as they could damage by

hanging onto it.

zA falling product may cause injury to the person or even fatality.

When not using the product for an extended period of time, keep the

product unplugged.

zOtherwise, this may cause heat emission from the accum ulated dirt or

degraded insulation, causing electric shock or fire.

Do not place your children's favorite toys or any other objects of

interest on the product.

zChildren may try to climb on the product to retrieve an object. The product

could fall, causing injury or even fatality.

When removing batteries from the remote control, be careful that

they are not swallowed by children. keep the batteries out of

children's reach.

zIf the batteries are swallowed, see a doctor immediately.

When replacing batteries, place the batteries in the correct +/-

polarity position as indicated on the battery holder.

zThe incorrect polarity may cause a battery to break or leak and may cause

fire, injury, or contamination (damage).

Use only specified standard batteries. Do not use new and used

batteries together.

zThis may cause a battery to break or leak and may cause fire, injury, or

contamination (damage).

The batteries (and rechargeable batteries) is not ordinary refuse and

must be returned for recycling purposes. The customer is

responsible for returning the used or rechargeable batteries for

recycling purposes as the consumer.

zThe customer can return used or rechargeable batteries to a nearby public

recycling center or to a store selling the same type of the battery or

rechargeable battery.

Other manuals for SyncMaster 400TXn

Table of contents

Other Samsung Monitor manuals

Samsung

Samsung SyncMaster S24A650D User manual

Samsung

Samsung SyncMaster 2243QW User manual

Samsung

Samsung P50HP - SyncMaster - 50" Plasma Panel User manual

Samsung

Samsung SyncMaster 650FP User manual

Samsung

Samsung SyncMaster 740NW User manual

Samsung

Samsung PM32F User manual

Samsung

Samsung SyncMaster 943NWX User manual

Samsung

Samsung SyncMaster 1100P User manual

Samsung

Samsung SyncMaster 2043BW User manual

Samsung

Samsung SyncMaster 210P PLUS User manual

Samsung

Samsung HPT4264 - 42" Plasma TV User manual

Samsung

Samsung SyncMaster 650MP-2 User manual

Samsung

Samsung SYNCMASTER P2050N User manual

Samsung

Samsung C24RG50FQR User manual

Samsung

Samsung 203B - SyncMaster - 20" LCD Monitor User manual

Samsung

Samsung IER Series User manual

Samsung

Samsung SH37R User manual

Samsung

Samsung CY-TM32LCA User manual

Samsung

Samsung S24E500C User manual

Samsung

Samsung S27AG32 Series User manual

Samsung

Samsung SyncMaster 400DXN-2 User manual

Samsung

Samsung SyncMaster 320P User manual

Samsung

Samsung SyncMaster 173MP User manual

Samsung

Samsung S24C650PLS User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual