Samsung S27A60 A Series User manual
LCD Monitor Manual
1. Precautions.................................................................................................................... 2
2. Disassembly................................................................................................................... 4
3. Exploded View ............................................................................................................... 12
4. Spare parts..................................................................................................................... 13
5. Maintenance.................................................................................................................. 14
6. Self Diagnosis................................................................................................................ 15
7. Troubleshooting Guide................................................................................................. 16
Contents
Project Model
S60A S27A60*A**
1. Precautions
1-1. Safety Precautions
WARNING
•A serious or fatal injury may result if instructions are not followed.
CAUTION
•Personal injury or damage to properties may result if instructions are not
followed.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage
is present inside. It is dangerous to make
any kind of contact with any internal part
of this product.
AC voltage: Rated voltage marked with
this symbol is AC voltage.
This symbol indicates that this product
has included important literature
concerning operation and maintenance.
DC voltage: Rated voltage marked with
this symbol is DC voltage.
Class II product: This symbol indicates
that a safety connection to electrical
earth (ground) is not required. If this
symbol is not present on a product with
a mains lead, the product MUST have a
reliable connection to protective earth
(ground).
Caution. Consult instructions for use:
This symbol instructs the user to consult
the user manual for further safety related
information.
2
LCD Monitor
1-1-1. Electricity and Safety
WARNING
•Do not use a damaged power cord or plug, or a loose power socket.
•Do not use multiple products with a single power socket.
•Do not touch the power plug with wet hands.
•Insert the power plug all the way in so it is not loose.
•Connect the power plug to a grounded power socket (type 1 insulated devices
only).
•Do not bend or pull the power cord with force. Be careful not to leave the power
cord under a heavy object.
•Do not place the power cord or product near heat sources.
•Clean any dust around the pins of the power plug or the power socket with a dry
cloth.
CAUTION
•Do not disconnect the power cord while the product is being used.
•Only use the power cord provided with your product by Samsung. Do not use the
power cord with other products.
•Keep the power socket where the power cord is connected unobstructed.
– The power cord must be disconnected to cut off power to the product when
an issue occurs
•Hold the plug when disconnecting the power cord from the power socket.
3
LCD Monitor
2. Disassembly
1•Preparation:
– Place sample on the flat floor
– Prepare open jig
Remark
BN81-14946A
(Open Jig)
2•Rise the stand button follow direction of the arrow.
•Lift up the stand and remove it follow direction of the arrow. Remark
4
LCD Monitor
3•Put an open JIG in the decomposition hole at the marked part to make a
gap. Remark
BN81-14946A
(Open Jig)
4 •Move an Open JIG follow direction of arrow to make a gap between Cover
Rear and panel. Remark
BN81-14946A
(Open Jig)
5
LCD Monitor
5 •After making a gap all edges of Cover Rear, hold the COVER-REAR and lift
it. Remark
BN81-14946A
(Open Jig)
6•Check the COVER REAR Top/Left/Right SCREWLESS hook and lift it as
shown in the figure. Remark
6
LCD Monitor
7•Disassemble the Cover Rear from the side. Remark
BN81-14946A
(Open Jig)
8•Disassemble the screw at 1 point as the picture shown.
•Disassemble the bracket stand link in the direction of the arrow as shown. Remark
6001-003016
(M3xL5)
7
LCD Monitor
CAUTION
•Please note that the cover decoration may be broken left / right when
decomposed on the top of COVER REAR
8
LCD Monitor
9 •Remove Jog function follow direction of the arrow. Remark
10 •Remove the Cable from the connector of the main board. Remark
9
LCD Monitor
11 •Lift the board down in consideration of the latch. Remark
12 •Hold the marked part by hand and pull it in the direction of the arrow to
disconnect the cable. Remark
10
LCD Monitor
Table of contents
Other Samsung Monitor manuals
Samsung
Samsung SyncMaster 650TS-2 User manual
Samsung
Samsung CSE700P Plus User manual
Samsung
Samsung Odyssey G7 LC27G7 T Series User manual
Samsung
Samsung SyncMaster 713BM User manual
Samsung
Samsung HPM5027 User manual
Samsung
Samsung T220HD - SyncMaster - 22" LCD Monitor User manual
Samsung
Samsung S19E450BR User manual
Samsung
Samsung SyncMaster 592V User manual
Samsung
Samsung Odyssey Ark Series User manual
Samsung
Samsung SyncMaster 174T User manual
Samsung
Samsung SyncMaster 755DFG User manual
Samsung
Samsung OH46F User manual
Samsung
Samsung 730MW - SyncMaster - 17" LCD Monitor User manual
Samsung
Samsung SyncMaster 910N User manual
Samsung
Samsung 910MP - SyncMaster 19" LCD Monitor User manual
Samsung
Samsung SyncMaster 750ST User manual
Samsung
Samsung OH46D User manual
Samsung
Samsung 320MP-2 - SyncMaster - 32" LCD Flat Panel... User manual
Samsung
Samsung SyncMaster 56B User manual
Samsung
Samsung SMT-1734 User manual
