Samsung HS6000 User manual
Bluetooth
Please read this manual before operating your headset, and keep it for future
reference.
Graphics used in this manual is for illustration purposes. The actual products may
vary.
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system, without the prior written permission of Samsung Electronics.
Trademarks
•• SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung
Electronics.
•• Bluetooth®is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
•• All other trademarks and copyrights are the property of their respective owners.
This product includes certain free/open source software.
The exact terms of the licenses, disclaimers, acknowledgements and notices are available
on the Samsung’s website opensource.samsung.com.
Please read all Safety precautions before using your headset to ensure safe and
proper use.
Safety precautions
•• When using your headset while driving, follow local regulations in the region you are
in.
•• Never disassemble or modify your headset for any reason. Doing this may cause the
headset to malfunction or become combustible. Bring the headset to an authorised
service centre to repair it.
•• Keep your device and all accessories out of the reach of small children or animals.
Small parts may cause choking or serious injury if swallowed.
•• Avoid exposing your device to very cold or very hot temperatures (below 0 °C or
above
45 °C).
Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.
•• Do not allow your device to get wet — liquids can cause serious damage. Do not
handle your device with wet hands. Water damage to your device can void your
manufacturer’swarranty.
•• Avoid using your device’s light close to the eyes of children or animals.
•• Do not use the device during a thunderstorm. Thunderstorms can cause the device
to malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage.
Exposure to loud sounds while driving may distract your attention and
cause an accident. Use only the minimum volume setting necessary to
hear your conversation.
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the first time.
1Connect the charger to the charging socket on the headset.
2Plug the charger in to the wall outlet. During charging, the indicator light will
turn red. If charging does not begin, unplug the travel adapter and plug it in
again.
3When the headset is fully charged, the red indicator light changes to blue.
Unplug the travel adapter from the wall outlet and the headset.
•• Use only Samsung-approved chargers. Unauthorised or Non-Samsung
chargers may cause an explosion or damage to the headset and could
invalidate any warranty on the product.
•• Over time, after many charging and discharging cycles, battery
performance will diminish. This is normal for all rechargeable batteries.
•• Never make or receive calls while charging, always disconnect your
headset from the charger and answer the call.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk
button at the same time. Depending on the battery level, the indicator light
flashes 5 times in one of the following colors:
Battery level Indicator light
color
Above 80% Blue
80 ~20% Violet
Below 20% Red
When the battery power is low
The headset beeps and the indicator light flashes red. If the headset powers off
during a call, the call will be automatically transferred to the phone.
Wearing the headset
Place the headset on your ear. Be sure to put the correct (Left, Right) earpiece
You can adjust the length of headset to stretch it up and down suitably on your
head.
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
•• Activated functions and features may differ depending on the phone type.
•• Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your headset.
To ensure you get the best performance from your headset.
•• Keep the distance between your headset and device as small as possible
and avoid placing your body or other objects in the signals path.
•• If you usually use your mobile phone with your right hand, wear the
headset on your right ear.
•• Covering your headset or device could effect its performance so keep
contact to a minimum.
Turning the headset on or off
To turn the headset on
Slide up the power switch. The blue indicator light flashes 4 times.
To turn the headset off
Slide down the power switch. The indicator light flashes blue and red then turns
off.
Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough to each other.
Pairing and connecting the headset with a phone
1Enter Pairing mode.
• With the headset turned on, press and hold the Talk button for 3 seconds.
• If the headset is turned on for the first time, it will go into Pairing mode
immediately and the Pairing mode stays for 3 minutes.
2Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3Select the headset (HS6000) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
•• Your headset supports the Simple Pairing feature which allows the
headset to be paired with a Bluetooth device without requesting a PIN.
This feature is available for devices that are compliant with Bluetooth
version 2.1 or higher.
•• If your phone supports A2DP(Advanced Audio Distribution Profile), you
can also listen to music with your headset. You cannot control playback
using your headset.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
1Connect with the first Bluetooth phone.
2Activate Multi-point feature.
••In Pairing mode, press and hold the Volume up button.
3Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
4Select the headset (HS6000) from the list of devices found by the second
Bluetooth phone.
5If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset
to the second Bluetooth phone.
6Reconnect to the headset from the first Bluetooth phone.
•• When the headset connects to two Bluetooth phones, some phones may
not connect to the headset as the second Bluetooth phone.
To turn Multi-point feature on or off
•• In Pairing mode, press and hold the Volume up button to turn the Multi-
point feature on or the Volume down button to turn the Multi-point feature
off.
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an MP3
player. The process of connecting to a music device is the same as for connecting
with a phone. When connected to both devices (phone and music device) you can
make or receive a call on the phone while listening to music from the music
device.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset or use the Bluetooth menu on your phone.
Reconnecting the headset
To reconnect to the paired phone
•• Press the Talk button on the headset or use the Bluetooth menu on your
phone.
To reconnect to the paired music device
•• Press button <Play>button on the headset or use the Bluetooth menu on your
music
device.
Your headset will attempt to automatically reconnect each time you
turn it on. If the Multi-point feature is activated, your headset will
attempt to reconnect to the two most recently connected devices.
This feature may be unavailable on some devices.
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device within range and tries to make a connection with it.
1The phone’s Bluetooth visibility option must be set to on.
2Place the headset and phone close to each other to avoid pairing with other
devices.
3In Pairing mode (solid blue indicator light), press and hold the Talk button on
the headset. The indicator light color changes to violet. The headset will attempt
active pairing for up to 20 seconds. To enter Pairing mode, see page 16.
•• The Bluetooth phone you want to connect with must not be
paired with other devices. If the phone is already connected to
another device, end the connection and restart the Active pairing
feature.
Other manuals for HS6000
5
Table of contents
Other Samsung Headset manuals
Samsung
Samsung HM-1300 User manual
Samsung
Samsung HM-3300 User manual
Samsung
Samsung Level U2 User manual
Samsung
Samsung BHM5000NBAC User manual
Samsung
Samsung HM6450 User manual
Samsung
Samsung WEP850 User manual
Samsung
Samsung HM1600 User manual
Samsung
Samsung EO-BG930 User manual
Samsung
Samsung BHM1700NDAC User manual
Samsung
Samsung HM5000 User manual
Samsung
Samsung SBH650 - Bluetooth Stereo Pendant Headset User manual
Samsung
Samsung GH68-12948A User manual
Samsung
Samsung WEP 300 User manual
Samsung
Samsung LEVEL U PRO EO-BN920CF User manual
Samsung
Samsung WEP490 User manual
Samsung
Samsung HM1500 User manual
Samsung
Samsung WEP475 - Bluetooth Headset User manual
Samsung
Samsung BHM3100 User manual
Samsung
Samsung SBH900 User manual
Samsung
Samsung HM-3300 User guide
