Samsung DW60H6050 Series Assembly instructions

DISHWASHER

REPAIR Guide

DISHWASHER

* For End User.

DW60M****F* DW60M5050BB

Basic Model : DW60H6050 Series

DW60H5050 Series

Model Name : DW60M6072 Series

DW60M5062 Series

DW60M5052 Series

DW60M5050 Series

DW60M5042 Series

Model Code : DW60M6072FS DW60M6072FW

DW60M5062FS DW60M5062FW

DW60M5052FS DW60M5052FW

DW60M5050BB DW60M5042FS

DW60M5042FW

IMPORTANT SAFETY NOTICE

Maintenance and repair of Samsung products are carried out by authorized

services throughout their economic life. Samsung has no responsibility for

any malfunctions, security problems and damages that may occur in case

of any intervention to the product by a person/institution other than the

Samsung Authorized Service. If the product is intervened by a person/

institution other than Samsung Authorized Service providers, the product

will be out of warranty even if it has not been minimum 24 months from

the date of purchase.

This service guide may not be reproduced in whole or

as a part in any form whatsoever without the written permission of

the SAMSUNG ELECTRONICS Company.

WARNING

Note

1. You may nd the installation, maintenance, repair, cleaning information about the device, the

list of spare parts of the device, and the necessary information for ordering spare parts that

can be supplied by authorized service at http://samsung.com/support or call center 4447711.

2. Visit the part purchase site and enter the model code of your product to check the parts

available for purchase. The model code is labelled on the edge of the tub. When you open the

dishwasher’s door, you can check the model code and version on the barcode label at the left

side of the tub.

3. For replacement parts make sure the part name matches that of the illustration in this

manual.

- User-serviceable parts are limited to door hinge and seals other seals spray arms drain

lters interior racks and plastic peripherals such as baskets and lids.

Caution

1. The part name listed on the site may differ from that in this manual. Please make sure you

choose the right part name.

2. Be sure to wear safety gloves while making repairs.

3. Must working more than 2 people to handling heavy weight.

Tools for Removal and Reassembly _ 3

1. TOOLS FOR REMOVAL AND REASSEMBLY

Tool image

No. Tool Type Remarks

①Adjustable Wrench

②Open-end Wrench 1-7/16”

③Vice Pliers

④Others

(screwdriver, nipper, long nose pliers) Common tools for servicing

Screwdriver – Phillip, Flat, Torx T15

⑤Ear clamping tool In reassembling of the clamp-bend(ear clamp) using our

SVC part, this tool is needed.

Preparation for parts replacement

1. Take out the residual water inside the product. (Drain the water by operating the drain pump)

2. Close the water supply valve.

3. Turn off the power & disconnect power cable.

You must turn off the circuit breaker connected to the product.

4. Pull out the unit from the sink and lay it on the oor.

Be careful of the drain hose when pulling out the unit.

5. For materials and repair information related to self-repair, refer to the web site : www.samsung.com/support

4 _ Standard Disassembly Drawings

2. STANDARD DISASSEMBLY DRAWINGS

2-1. PRECAUTION

Caution

Before servicing,

- Make sure to remove all items include baskets inside dishwasher.

- Drain the water in the dishwasher and disconnect the power supply.

- Lock the water faucet that connected with inlet hose.

- Uninstall the dishwasher from the furniture cabinet except simple work.

- Disconnect the Inlet & Drain hoses from the duct, if the hoses are too short to pull the dishwasher out of the furniture

cabinet enough.

- Make sure to remove any remaining water in the Sump and hoses by rag or vacuum.

→ There is a risk of water spill on the oor.

Standard Disassembly Drawings _ 5

2-2. CAP CASE BRAKE / GASKET BRAKE

- Cap Case Brake : DD81-01387A / SVC-AIR BREAKER NUT

- Gasket Brake : DD81-01388A / SVC-SEAL RING

Part Figure Description

CAP CASE

BRAKE / GASKET

BRAKE

[DISASSEMBLY]

1. Remove 3 screws that connect left SIDE PANEL to

front side of dishwasher.

- Type A: DD81-02693A / 2 pcs

- Type B: DD81-02694A / 1 pc

Warning

Be sure to remove the power plug before servicing.

NOTE :

In case of Free Standing models, there’re no

screws of type B.

2. Remove 3 screws at the back side of dishwasher.

- Type C: DD81-02692A / 1 pc

- Type B: DD81-02694A / 2 pcs

NOTE :

In case of Free Standing models, take off the

COVER TOP by removing 2 screws of type A.After

removing screws, pull the COVER TOP backward

rst, and take it off upward.

Guide Tub Top

3. Remove 1 screw at the left side of GUIDE TUB

TOP.

- Screw: DD81-02694A / 1 pc

6 _ Standard Disassembly Drawings

Part Figure Description

CAP CASE

BRAKE / GASKET

BRAKE

4. Take off the left SIDE PANEL.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

5. Take off the CAP CASE BRAKE by rotating to

counter-clockwise direction with long-nose pliers.

Caution

It can be broken easily when you use iron part of

the pliers. Take off the cap using handle part to

prevent damage.

Cap Case brake Gasket brake

6. Remove the GASKET BRAKE from the CASE

BRAKE assembly.

[ASSEMBLY]

1. Put the GASKET BRAKE on the CASE BRAKE,

and fasten the CAP CASE BRAKE by rotating to

clockwise direction with long-nose pliers.

Caution

It can be broken easily when you use iron part of

the pliers. Take off the cap using handle part to

prevent damage.

Caution

Pay attention to assemble the seal correctly.

It may cause the water leakage when it’s

misassembled.

2. Assemble the left SIDE PANEL with the screws.

Caution

Fasten the screws that was assembled to origin

location. Don’t assemble to other locations.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

Standard Disassembly Drawings _ 7

2-3. DOOR HINGE

- Door Hinge : DD82-01505A, DD82-01506A / SVC ASSY-DOOR LINK R, L

Part Figure Description

DOOR HINGE

[DISASSEMBLY]

* PREPARATION: Remove SIDE PANEL Left &

Right refer to the section of ‘CAP CASE BRAKE /

GASKET BRAKE’.

1. Remove 8 screws xing the ASSY CONTROL

PANEL with Torx® T15 screwdriver.

- Type A: DD81-01371A / 2 pcs

- Type B: DD81-02466A / 6 pcs

Warning

Be sure to remove the power plug before servicing.

Caution

The screws can fall into the SUMP after

disassembly. Keep the screws to other place to

reassemble the DOOR.

DW60M****F*

DW60M5050BB

2. Remove wire connector of Sub PBA.

NOTE :

In case of DW60M50**** models, remove the Door

switch assembly also.

3. Remove 6 screws to take off DOOR OUTER with

Torx® T15 screwdriver.

- Type C: DD81-01370A / 6 pcs

Warning

Be sure to remove the power plug before servicing.

Caution

Be careful to avoid injury when the DOOR is closed

after removing DOOR OUTER.

Caution

The screws can fall into the SUMP after

disassembly. Keep the screws to other place to

reassemble the DOOR.

8 _ Standard Disassembly Drawings

Part Figure Description

DOOR HINGE

Hook Hook

4. Remove 2 terminals that connected to

DETERGENT DISPENSER, and 1 ground wire that

connected to BRACKET DOOR FRAME.

Warning

Be sure to remove the power plug before servicing.

Caution

Pay attention to hook of terminals.

5. Remove HOLDER ROPE DOOR from the DOOR

HINGE left & right with the DOOR closed.

Caution

Pay attention to DOOR drop after removing the

rope. It may cause injury.

Standard Disassembly Drawings _ 9

Part Figure Description

DOOR HINGE

GUIDE HINGE 6. Push both ribs of GUIDE HINGE to pull out the DOOR.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges of broken parts.

About 15˚

DOOR INNER assembly

7. Do same work at the opposite side, and pull out the

DOOR INNER assembly to the direction of about 15˚.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

8. Remove 2 screws to take off BRACKET DOOR

FRAME from the DOOR INNER.

- Screws: DD81-02728A / 2 pcs

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

9. Remove 2 screw at each side to take off DOOR

HINGE from the DOOR INNER.

- Screws: DD81-02764A / 4 pcs

10. Take off the GUIDE HINGE from the DOOR

HINGE.

NOTE :

DOOR HINGE and GUIDE HINGE will serviced to

assembly only.

10 _ Standard Disassembly Drawings

Part Figure Description

DOOR HINGE

[ASSEMBLY]

1. Assemble the DOOR HINGE assembly and

BRACKET DOOR FRAME with machine screws.

- Screws for DOOR HINGE assembly:

DD81-02764A / 4 pcs

- Screws for BRACKET DOOR FRAME:

DD81-02728A / 2 pcs

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

About 15˚

2. Put the DOOR INNER assembly into the holder of

TUB to lock the hook of DOOR HINGE.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

3. Put the HOLDER ROPE DOOR on the both side of

DOOR HINGE with the DOOR closed.

4. Connect 2 terminals of DETERGENT DISPENSER,

and 1 ground wire.

Caution

Make sure the Wire harness are not getting stuck in

other parts.

Other manuals for DW60H6050 Series

This manual suits for next models

Table of contents

Other Samsung Dishwasher manuals

Samsung

Samsung DW80BB70 Series User manual

Samsung

Samsung DW5363 Series User manual

Samsung

Samsung DW60A807 Series Guide

Samsung

Samsung DW80H9970US User manual

Samsung

Samsung DW-BG97 Series User manual

Samsung

Samsung DW80R7061US User manual

Samsung

Samsung DW80K7050 Series User manual

Samsung

Samsung DW6 R707 Series User manual

Samsung

Samsung DW80J7550US User manual

Samsung

Samsung DW80J3020UW User manual

Samsung

Samsung DW-FG72 Series User manual

Samsung

Samsung DW80H99 Series User manual

Samsung

Samsung DW60A609 Series User manual

Samsung

Samsung DMB58AHC User manual

Samsung

Samsung DW50T6060 Series User manual

Samsung

Samsung DW80CG40 Series User manual

Samsung

Samsung DW80J3020 Series User manual

Samsung

Samsung DW60H6050 Series Assembly instructions

Samsung

Samsung DMR57 Series User manual

Samsung

Samsung DMT800RHB User manual

Samsung

Samsung DMT800RHS/XAA Operating instructions

Samsung

Samsung DW80R7060US User manual

Samsung

Samsung DW60CG5 Series User manual

Samsung

Samsung DW80H9940US/AA User manual

Popular Dishwasher manuals by other brands

Electrolux

Electrolux ESI5211LOX user manual

KitchenAid

KitchenAid KUDB230B Use and care guide

Brandt

Brandt BDJ424DB instruction manual

Asko

Asko DSD767UXXL.AU user manual

Beko

Beko DFN26210W instruction manual

NEFF

NEFF S153ITX00E INFORMATION FOR USE

Midea

Midea SV 4.45 wi manual

LG LDF7932 Specifications

Gorenje

Gorenje GV63214 instruction manual

Hotpoint

Hotpoint HDA1100ZWH Installation information

Blomberg

Blomberg LDFN2240W instruction manual

AEG

AEG FFB83836PM user manual

Cylinda

Cylinda DM3220RFD user manual

Atag

Atag DW8214MB manual

GE GLD8000 Series owner's manual

Siemens

Siemens SN23HI02KE INFORMATION FOR USE

Omega

Omega ODW717X instruction manual

BORETTI

BORETTI BVW-683 operating instructions