Safety Vision ROADRECORDER 8000 User manual
ROADRECORDER®8000 NVR
USER GUIDE
Important Notices
Title: RoadRecorder 8000 NVR User Guide
Firmware Version: 5.0.2
Document Version: 1
Revision: 0
Safety Vision attempts to provide information contained
in this manual based on the latest product information
available at the time of publication. However, because of
Safety Vision’s policy of continual product improvement,
Safety Vision reserves the right to amend the information in
this document at any time without prior notice.
This material is condential and the property of Safety
Vision. It is shared with your company for the sole purpose
of helping you with the operation of the described
equipment.
Safety Vision makes no warranty of any kind with regard
to this material, including, but not limited to, the implied
warranties of merchantability and tness for a particular
purpose. Safety Vision shall not be liable for errors
contained herein or for incidental or consequential damages
in connection with the furnishing, performance, or use of
this material.
Safety Vision expressly disclaims all responsibility and
liability for the installation, use, performance, maintenance,
and support of third-party products. Customers are advised
to make their independent evaluation of such products.
No part of this document may be photocopied, reproduced,
or translated to another language without the prior written
consent of Safety Vision.
Safety Vision® is a registered trademark of Safety Vision, LLC. All
other products or name brands mentioned in this document are
trademarks of their respective
owners. For more information about Safety Vision and its
products, go to www.safetyvision.com or call 800-880-8855.
2ROADRECORDER 8000 NVR USER GUIDE
Table of Contents
Components 2
Front Panel 2
Rear Panel 3
Hard Drive Cannister 4
LCD Control Panel (50-000001) 5
Installation 6
Main Wiring Diagram 6
Flat Mount 8
Hard Drive Cannister 9
SIM and SD Cards 10
LCD Control Panel Operation 11
Conguration 12
Connecting to the NVR 12
Help Windows 13
Product Details 14
Live View 15
Snapshot Viewer 16
Firmware / Cong 17
Storage 18
Network Settings 19
Date / Time 20
Change Password 21
Startup & Shutdown 22
Audio/Video Settings 23
Sensor Settings 24
Recording 25
Thresholds 26
GPS / GEO Fence 27
Camera 28
Sensor Status 29
Recorder Status 30
Tag Events 31
Appendix A: Specications 32
Appendix B: Dimensions 33
Appendix C: Axis Device Conguration 34
Appendix D: GPS Coordinate 35
Conversion 35
ROADRECORDER 8000 NVR USER GUIDE 1
Components
Front Panel
1 - LED Status Lights - Displays the status of
various NVR operations (see table below).
2 - LAN Port - Access port for the NVR’s
Conguration menus. The IP is182.168.1.200.
3 - USB Ports - USB 3.0 ports for optional
external accessories.
4 - Hard Drive Lock - Insert the supplied
security key and turn 90 degrees left to unlock
the hard drive. Turn the key 90 degrees right to
lock the hard drive.
5 - SD Card - Currently under development.
6 and 7 - SIM Cards - Currently under development.
8 - SIM and SD Cards Access Panel - Remove the two
screws to remove the panel and access the SIM and SD cards.
9 - Hard Drive Bay - Insert or remove the removable hard
drive. See the Hard Drive chapter for more information.
LED Color Status
Green On: NVR is ready to record
Blink: NVR Power on (startup) condition met
Red On:Vehicle power failure, in ooad/shutdown
sequence
Blink: Shutdown condition met, shutting down
after ooad
O NVR shut down complete
Green On: All cameras initialized correctly and have video
Blink: Camera initialization in progress
Red On: One or more cameras has video loss
Blink: One or more camera initializations failed
Green On:Writing to Primary
Red On:Writing to Secondary
Green On: NVR running and recording
Blink: NVR running, but not recording currently
Red On: One or more events have been recorded
Blink: NVR shutting down
O NVR powered o
2ROADRECORDER 8000 NVR USER GUIDE
Rear Panel
1 - Main Power Harness - Supplies power to
the NVR from the Power Supply.
2 - USB Ports - USB 3.0 ports for optional
external accessories.
3 - Sensor Inputs - Inputs for 16 optional
external sensors (lights, brakes, optional
equipment, etc).
4 - Sensor Outputs - Outputs 12V @ 100 mA
to 16 optional sensor outputs.
5 - DVI-D Port - Connection for optional high
resolution external display.
6 - HDMI Port - Connection for optional high
resolution external display.
7 - DC Relay Bypass - [Vehicle battery voltage] @ 10 A for
powering optional external switches.
8 - GPS Antenna Port - Connection for external GPS
antenna.
9 - LAN2 Port - M12 Ethernet connector for connection of
an optional external Wi-Fi bridge.
10, 11, 12 - Wi-Fi Module Antenna Ports - Connect
external antennas for the internal Wi-Fi module.
13 and 14 - COM1 and COM2 - For future expansion.
15 - Audio Port - Connection for optional external
microphone.
16 - PoE Power Harness - Supplies 48V for Power over
Ethernet (PoE) from the Power Supply
17 - Grounding Stud
ROADRECORDER 8000 NVR USER GUIDE 3
Hard Drive Cannister
1 - Power Supply - Connect and external
power supply when removed and connected to
a PC.
2 and 3- Status LED - Displays power and
activity status of the hard drive cannister when
connected to a PC.
4 - USB Port - USB 3.0 port for connection to a
PC.
5 - Data Port - Connects with the NVR when
inserted intot he NVR’s hard drive bay.
4ROADRECORDER 8000 NVR USER GUIDE
LCD Control Panel (50-000001)
The 50-000001 LCD Control Panel is designed
to provide advanced functionality with the
RoadRecorder 8000. See the 50-000001 LCD
Control Panel Operation chapter for more
information.
1 - LCD Display - Displays alerts and statuses.
2 - Esc Button - Press the Esc Button to cancel
the current command a return to the display.
3 - Navigation Keys - Use the left, right, up,
and down keys to navigate menus or move the
cusor. Press the center key to enter a command.
4 - Event Button - Press the Event Button to
save an event.
5 - Error Status LED - Displays solid red when an error
has occured, such as a disconnected camera. The LED
remains red until the error is corrected. Displays solid green
when no errors are present.
6 - Event Status LED - Displays solid red when an event
is recording. The LED remains red until recording is nished.
Displays solid green otherwise.
7 - Ooading Status LED - Displays solid red when
recorded data is being ooaded to the SD card or HDD.
ROADRECORDER 8000 NVR USER GUIDE 5
Installation
Main Wiring Diagram
Typical Conguration
Sensor Wire Color Description
A1 Blue Brake
A2 Yellow Right Turn
A3 Green Left Turn
A4 Violet Head Lights
A5 Brown Front Door
A6 White Wheel Chair
A7 Grey Stop Request
B1 Orange Ignition
B2 Red Open
B3 Open
B4 Open
B5 Open
B6 Open
B7 Open
P1 Red Main Power
P2 Black Main Ground
Fuse Requirements
P1 Red Main Power (7.5 amp)
B1 Orange Ignition (3 amp)
6ROADRECORDER 8000 NVR USER GUIDE
WARNING: REMOVING MAIN THE MAIN POWER SOURCE WHILE THE NVR IS RECORDING MAY
RESULT IN CORRUPT DATA.
Be aware that removing and reconnecting power to the NVR in short periods of time (such as during some vehicle
maintenance procedures) may cause hard drive failure, leading to corrupt recorded video and other data. Safety Vision
recommends properly shutting down the NVR before removing the main power harness when cycling of the vehicle’s
power is to occur:
1. Remove the ignition source.
2. Wait for the NVR to completely power down.
The NVR may be congured to record for a period after the ignition is turned o.
3. OBSERVE THAT ALL STATUS LEDS HAVE TURNED OFF.
4. Remove the main power harness.
ROADRECORDER 8000 NVR USER GUIDE 7
Flat Mount
Secure the NVR to the surface with self-tapping
screws or rivets.
Ensure that the front panel of the NVR remains
accessible and there is a minimum 2.5 inches of
clearance for cables.. Do not install the NVR in
an area of the vehicle cabin that could interfere
with the safe operation of the vehicle.
8ROADRECORDER 8000 NVR USER GUIDE
Other manuals for ROADRECORDER 8000
1
Table of contents
Other Safety Vision Network Hardware manuals
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
