Ryobi RC254O User manual

WARNING: This procedure sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury, the

user must read and understand the operator’s manual before using the product.

TO START A COLD ENGINE:

150:1 Ratio = Mix 20 mL of synthetic 2-stroke oil per litre of petrol. Ensure the fuel is fresh and is correctly

mixed before pouring into the fuel tank.

2Slowly press the primer bulb 10 times or until the fuel appears.

3Set the choke lever to “full” choke position.

4Hold down the throttle lock, and then squeeze the throttle trigger.

Using manual operation:

Pull the starter grip and rope (4x maximum) until the engine attempts to start.

or

Using ONE+ EASYSTART Module:

Set the ONE+ EASYSTART Module to , insert into the starter housing, and then press the ONE+

EASYSTART’s power button until the engine attempts to start (4 seconds maximum).

6Set the choke lever to “half” choke position.

Using manual operation:

Pull the starter grip and rope (6x maximum) until the engine starts.

or

Using ONE+ EASYSTART Module:

Set the ONE+ EASYSTART Module to , insert into the starter housing, and then press the ONE+

EASYSTART’s power button until the engine starts (4 seconds maximum).

NOTE: If the engine does not start, repeat the procedure from step 3 until the engine starts.

8Allow the engine to warm for 10 seconds. Set the choke lever to “run” position.

TO START A WARM ENGINE:

Slowly press the primer bulb 10 times or until the fuel appears.

2Set the choke lever to “run” position.

3Hold down the throttle lock and then squeeze the throttle trigger.

Pull the starter grip and rope until the engine runs. Do not pull the starter grip more than six times.

or

Using ONE+ EASYSTART Module:

Set the ONE+ EASYSTART Module to , insert into the starter housing, and then press the ONE+

EASYSTART’s power button (4 seconds maximum).

TO STOP THE PRODUCT:

Push the on/off switch to the “STOP” position.

Quick Start Guide

RC254O

9

1

5

7

4

2

3

4

1

9

2

1

3

47 5

6

8

xxxxxxxxx-01

Other manuals for RC254O

2

Table of contents

Popular Tiller manuals by other brands

MTD

MTD 410R parts list

Craftsman

Craftsman 247.29931 Operator's manual

MTD

MTD FRT Series Operator's manual

Craftsman

Craftsman 917.298353 owner's manual

Troy-Bilt

Troy-Bilt Colt FT Operator's manual

MTD

MTD OHV Series Original operating instructions

YAT

YAT YT5601-01 Assembly, Use, Maintenance Manual

Craftsman

Craftsman 917.296010 owner's manual

Troy-Bilt

Troy-Bilt OEM-290-260 Operator's manual

Scheppach

Scheppach MTP560 Translation from the original instruction manual

GARDEN WAY

GARDEN WAY 12194 owner's manual

Classen

Classen STAND-AER SA-25 Operator's manual and parts list

Craftsman

Craftsman 850 Series owner's manual

DR

DR PILOT 2 Safety & Operating Instructions

Altrad

Altrad ATIKA BH 1400 N Original instructions, safety instructions, spare parts

WIL-RICH

WIL-RICH 2500 Operator's manual

Viking

Viking HB 685 instruction manual

SMASH

SMASH TLG415 instruction manual