Ryobi RHT5555R User manual
RHT5555R
RHT6260RL
ORIGINAL INSTRUCTIONS
Electric Hedge Trimmer
Important!
It is essential that you read the instructions in this manual before operating
this machine.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
Safety
1
GENERAL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
HOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
ŶKeep work area clean and well lit. Cluttered or dark
areas invite accidents.
ŶDo not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
ŶKeep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
ŶPower tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
ŶAvoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
ŶDo not expose to rain or damp conditions. Water
entering a power tool will increase the risk of electric
shock.
ŶDo not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
ŶWhen operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
ŶIf operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
ŶStay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
ŶUse personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
ŶPrevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
ŶRemove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
ŶDo not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
ŶDress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
ŶIf devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
ŶDo not force the product. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
ŶDo not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
ŶDisconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
ŶStore idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
ŶMaintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
ŶKeep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
ŶUse the power tool, accessories and tool bits etc.
Safety
2
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
ŶHave your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SPECIFIC SAFETY RULES
WARNING
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
ŶKeep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
ŶCarry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer, always fit the cutting device
cover. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
ŶHold the power tool by insulated gripping surfaces
only. The cutter blade may contact hidden wiring or
its own cord. Cutter blade contacting “live” wire may
expose metal parts of the power tool “live” and could
give the operator an electric shock.
ŶKeep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by blades.
ADDITIONAL
ŶCarefully check the hedge before cutting for foreign
objects such as, wire fences, posts or cables.
ŶIf a residual current device is required, use a RCD
with a tripping current of 30mA or less.
ŶDo not use the trimmer without front handle in
place. Keep both hands on handles when the unit is
in use.
ŶIf the power cable becomes damaged, you must
return the tool to an approved service centre for
repair or replacement.
ŶDo not attempt to cut in areas or blind spots where
you cannot see the entire blade. Failure to observe
this warning may result in serious personal injury or
damage to the tool.
RESIDUAL RISKS
ŶIt has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud’s
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to
the development of these symptoms. It is presently
unknown what, if any, vibrations or extent of exposure
may contribute to the condition. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
ƔKeep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud’s Syndrome.
ƔAfter each period of operation, exercise to increase
blood circulation.
ƔTake frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see
your physician about these symptoms.
ŶThe vibration level during actual use of the power
tool can differ from the declared total value
depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on
an estimation of exposure in the actual conditions of
use, taking account of all parts of the operating cycle
such as the times when the tool is switched off and
when it is running idle in addition to the trigger time.
INTENDED USE
ŶThis product is intended for cutting and trimming
hedges, bushes and shrubs.
ŶIt is intended for operation below shoulder level and for
domestic use only.
ŶDo not use for any other purpose.
ENVIRONMENTAL PROTECTION
Recycle raw materials and waste electrical
products instead of disposing of as waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
SYMBOL
Safety alert
Safety
3
Please read the instructions carefully
before starting the machine.
Wear eye and ear protection.
Do not expose to rain.
Remove plug from the mains
immediately if the cable is damaged or
cut.
102
Guaranteed sound power level.
Class II. Double insulation
CE Conformity
GOST-R Conformity
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.
4
Unpacking
x 1
x 1
x 1
x 1
x 1
RHT5555R
RHT6260RL
5
Getting started
3
RHT5555R
RHT6260RL
1
1
2
3
4
2
Overview
6
p.7
p.7 p.10p.9
p.8
RHT5555R
RHT6260RL
Operation
7
RHT5555R
RHT6260RL
Operation
8
2
3
1
3
2
1
1
1
2
3
2
Other manuals for RHT5555R
1
This manual suits for next models
1
Table of contents
Other Ryobi Power Tools manuals
Ryobi
Ryobi CJS180LM User manual
Ryobi
Ryobi RCT4 User manual
Ryobi
Ryobi 5133002516 User manual
Ryobi
Ryobi EHT150RG Operation manual
Ryobi
Ryobi BD513 Operation manual
Ryobi
Ryobi R18CG User manual
Ryobi
Ryobi EJ700L User manual
Ryobi
Ryobi AirStrike R18ST User manual
Ryobi
Ryobi CP-180M User manual
Ryobi
Ryobi RMT300 User manual
Ryobi
Ryobi RSDP4 User manual
Ryobi
Ryobi RRW1814X User manual
Ryobi
Ryobi ERT2100VK Operation manual
Ryobi
Ryobi R18MT User manual
Ryobi
Ryobi RMT200 User manual
Ryobi
Ryobi JS451L Configuration guide
Ryobi
Ryobi R12DD User manual
Ryobi
Ryobi MHG-2000 Operation manual
Ryobi
Ryobi JS550LK User guide
Ryobi
Ryobi RDP102L User manual
