Ryobi EAG2023CN Operation manual
EAG2023CN
ANGLE GRINDER
OWNERʼS OPERATING MANUAL
DOUBLE
INSULATED
N197
CAUTION: Carefully read through this entire ownerʼs manual before using your
angle grinder.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Your new angle grinder has been engineered and manufactured to Ryobiʼs high standard for
ease of operation anddependability, operator safety. Properly cared for, it will give you years of
rugged,
trouble free performance.
THANK YOU FOR BUYING A RYOBI ANGLE GRINDER
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your angle grinder properly and only for what it is intended, you will enjoy years of safe,
reliable service.
Thank You again for buying Ryobi tools.
The purpose of safety rules is to attract your attention to possible
dangers. The safety symbols and the explanations with them,
require your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instruction or warnings they give are not substitutes for proper
accident prevention measures.
SAFETY ALERT SYMBOL. Indicates caution or
warning. May be used in conjunction with other
symbols or pictures.
WARNING: Failure to obey a safety warning can
result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.
WARNING: Do not attempt to operate this tool until
you have read thoroughly and understood
completely, safety rules, etc. contained in this
manual. Failure to comply can result in accidents
involving fire, electric shock or serious personal
injury. Save owners manual and review frequently
for continuing safe operation and instructing others
who may use this tool.
1. KNOW YOUR POWER TOOL. Read owners manual carefully.
Learn its applications and limitations as well as the specific
potential hazards related to this tool.
2. GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING
BODY CONTACT WITH GROUNDED SURFACES. For
example, pipes, radiators, ranges, refrigerator enclosures.
3. KEEP WORK AREA CLEAN. Cluttered areas and benches
invite accidents.
4. AVOID DANGEROUS ENVIRONMENT. Don't use power tools
in damp or wet locations or expose to rain. Keep work area
well lit.
5. KEEP CHILDREN AND VISITORS AWAY. Visitors should
wear safety glasses and be kept a safe distance from work
area. Do not let visitors contact tool or extension cord.
6. STORE IDLE TOOLS. When not in use, tools should be stored
in a dry and high or locked-up place, out of reach of children.
7. DON'T FORCE TOOL. It will do the job better and safer at
the rate at which it was designed.
8. USE RIGHT TOOL. Don't force small tool or attachment to
do the job of a heavy duty tool. Don't use tool for purpose not
intended.
9. DRESS PROPERLY. Do not wear loose clothing or jewellery.
They can be caught in moving parts. Rubber gloves and non-
skid footwear are recommended when working outdoors. Also
wear protective hair covering to contain long hair.
10.ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses
have only impact resistant lenses, they are not safety glasses.
11. PROTECT YOUR LUNGS. Wear a dust mask if operation is
dusty.
12.PROTECT YOUR HEARING. Wear hearing protection during
extended periods of operation.
13.DON'T OVERREACH. Keep proper footing and balance at
all times. Do not use tool on a ladder or unstable support.
Secure tools when working at elevated levels.
14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean
for better and safer performance. Follow instructions for
lubricating and changing accessories.
15.REMOVE ADJUSTING KEYS AND WRENCHES. Form a
habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
16.NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal
sparking of the motor could ignite fumes.
17.KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND
GREASE. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum based products, or any
strong solvents to clean your tool.
18.STAY ALERT AND EXERCISE CONTROL. Watch what you
are doing and use common sense. Do not operate tool when
you are tired. Do not rush operation of tool.
19.CHECK DAMAGED PARTS. Before further use of the tool,
a guard or any other part that is damaged should be carefully
checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation. Aguard or
any other part that is damaged should be properly repaired
or replaced by an authorised service centre.
20.DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON
AND OFF. Have defective switches replaced by authorised
service centre.
21.DO NOT OPERATE THIS TOOL WHILE UNDER THE
INFLUENCE OF DRUGS, ALCOHOL OR ANY
MEDICATION.
22.THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG
OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG
CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT
THEY DO NOT PLAY WITH THE APPLIANCE.
RULES FOR SAFE OPERATION
The operation of any tool can result in
foreign objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles
or safety glasses with side shields and
a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety
glasses with side shields.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Due to continued product
refinement policy, product features
and specifications can and will
change without notice. Check
current features and specifications
with your retailer.
2
Fig.1
Fig.4
Fig.3
Fig.6
Fig.7a Fig.7b
2
12
2
12
10
8
3
1
8
7
3
9
11
Fig.5
4
4
1
2
Fig.2
513
6
4
10
13. Livetool IndicatorTM
THANK YOU FOR BUYING A RYOBI PRODUCT
INSTRUCTIONS FOR SAFE HANDLING
Never use the tool if its cover or any bolts or screws are missing. If the cover, bolts
or screws have been removed, replace them prior to use. Maintain all parts in good
working order.
Always secure tools when working in elevated positions.
Never touch the grinding wheel or other moving parts during use.
Never start a tool when its rotating component is in contact with the work piece.
Never lay a tool down before its moving parts have come to a complete stop.
present a hazard.
REPLACEMENT PARTS : When servicing use only identical replacement parts.
Do not use wheels having a maximum permissable speed below 6600 rpm.
ANGLE GRINDER SAFETY PRECAUTIONS
DESCRIPTION
the product.
To ensure your safety and satisfaction, carefully read through this
OWNERʼS MANUAL and the SAFETY INSTRUCTIONS before using
5. ON/OFF switch
1. Grinding wheel
2. Tool-less wheel guard
3. Aux. handle
4.
Rotary handle lock button
10.Wrench
6.
Safety lock
7.
Disc flange
8.
Clamp nut
9.
11. Spindle lock button
Check that the speed marked on the grinding wheel is equal to or
greater than the rated speed of the tool.
Ensure that the dimensions of the grinding wheel are compatible
with the tool and that the wheel fits the spindle.
Grinding wheels must be stored in a dry place.
Do not store objects on top of the grinding wheel.
Grinding wheels must not be used for any operation other than grinding.
Grinding wheels must be stored and handled with care in accordance
with the manufacturer's instruction.
Inspect the grinding wheel before use to ensure that it is not chipped
or cracked. Chips or cracks can cause the wheels to shatter, resulting
in possible serious injury.
4
12.Wheel guard lock
Grinding wheel
Frequency
Voltage*
Input
Spindle thread
No load speed
Disc bore size
Net weight
The use of accessories or other than those recommended in this manual might
Ensure that the wheel is fitted in accordance with this manual.
Ensure that the grinding wheel is correctly mounted and tightened
before use and run the tool at no-load speed for 30 seconds in a
safe position. Stop immediately if there is considerable vibration or if
other defects are detected. If this condition occurs, check the tool to
determine the cause.
Do not use separate reducing bushings or adapters to adapt large
hole grinding wheels.
Check that the work piece is properly supported.
Use only grinding wheels approved by RYOBI
Ensure that sparks resulting from use do not create a hazard e.g. do
not hit people, or ignite flammable substances.
Always use protective safety glasses and ear protectors.
Use other personal protective equipment such as gloves, apron and
helmet when necessary.
Never place the tool on the floor or other surfaces while it is running.
Grinding wheels continue to rotate after the tool is switched off.
Never touch the wheel or place it on the floor or other surfaces while
it is rotating.
To ensure safety and reliability, all repairs should be performed
by an AUTHORIZED SERVICE CENTRE or other QUALIFIED
SERVICE ORGANIZATION.
MOUNTING THE GRINDING WHEEL (Fig.4,5&6)
WARNING!
Check carefully whether or not there are cracks in the wheel.
Replace a cracked wheel immediately.
1. Attach the disc flange (7), the grinding wheel (1) and the clamp nut
(8) to the spindle shaft (9).
Be sure the disc flange is properly seated on the spindle shaft.
2.
Depress the s
pindle
lock button (
1
1) located on the right side of gear case.
3. Using the wrench (10) provided, tighten the clamp nut in a clockwise
direction.
TOOL - LESS WHEEL GUARD (Fig.7b)
Release the wheel guard lock lever (12) then turning the tool-less wheel
guard (2) to the desire position.
OPERATION
KEEP SAFETY GUARDS IN PLACE.
N
NEVER OPERATE THIS ANGLE GRINDER WITHOUT THE TOOLESS
WHEEL GUARD.
EVER COVER THE AIR VENTS SINCE THEY MUST ALWAYS BE
OPEN FOR PROPER MOTOR COOLING.
The key to efficient operating is controlling the pressure and surface contact
between the disc and work piece. Flat surfaces are ground at an acute
angle, usually 10 to 20 degrees with the work piece. Allow the disc to reach
full speed before starting to grind. Too great an angle causes concentration
MAINTENANCE
of pressure on a small area which may gouge or burn work surface.
After use, check the tool to make sure that it is in good condition.
It is recommended that you take this tool to a Ryobi Authorized Service
Centre for a through cleaning and lubrication at least once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS IN
MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE SOCKET
BEFORE CHANGING REMOVABLE OR EXPENDABLE PARTS
(GRINDING DISC, CUTTING DISC ETC), BEFORE LUBRICATING OR
WORKING ON THE UNIT.
WARNING!
NOISE BUILD-UP
AUXILIARY HANDLE (Fig.1)
The auxiliary handle (3) can be attached to either side of the gear box, or the
upper part of the gear box.
The auxiliary side handle on this angle grinder houses the wheel lock nut
wrench. To remove the wheel lock nut wrench from the auxiliary handle, pull
it out by the two lugs on the wrench. When finished with the wrench, slide it
back in to the auxiliary handle with the lugs facing out.
230mm (9")
50 Hz
240 V
2200 W
M14
6000
22.2 mm
7.3 kg
EAG2023CN
x2
SPECIFICATIONS
* Be sure to check the nameplate on the product, because the voltage
is subject to change depending on the area in which the product
is to be used.
APPLICATIONS
(Use only for the purposes listed below.)
MAIN HANDLE
Grinding
Noise (sound pressure level) in the workplace can exceed 85 dB (A). In
this case, sound insulation and hearing protection measures must be taken
by the operator.
SWITCH
STANDARD ACCESSORIES
Aux. handle (3)
Grinding wheel ( 1 )
Wrench (10)
The main handle can be set to any of three positions (0 and 90 degrees) right
and left by pressing the rotary lock button (4) and turning.
lever
Spindle shaft
Livetool IndicatorTM
This tool features a Livetool IndicatorTM (13) which illuminates as soon as the tool
is connected to the power supply. This warns the user that the tool is connected
to live power and will operate when the switch is pressed.
To ensure safety and reliability, all repairs should be performed
by an AUTHORIZED SERVICE CENTRE or other QUALIFIED
SERVICE ORGANIZATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
If the supply cord is damaged, it shall be replaced by the manufacturer
or its service agent or similar qualified person in order to avoid a hazard.
Use the tool only for approved applications. Never use coolants or
water or use the tool as a fixed tool.
Grip the tool securely with both hands while operating.
To switch on the unit - use your index finger to press forward the safety
lock (6) and then press the ON / OFF switch (5).
To switch off the unit - just release the ON / OFF switch (5).
RYOBI TECHNOLOGIES AUSTRALIA PTY.LTD.
GUARANTEE
RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.
A.B.N. 98 002 277 509
SYDNEY: 359-361 Horsley Road, Milperra, N.S.W. 2214.
Contact during normal business hours.
RYOBI NEW ZEALAND PTY. LTD.
AUCKLAND:
27 Clemow Drive, Mt Wellington, N.Z.
Contact during normal business hours.
Subject to the guarantee condition below, this Ryobi tool
(hereinafter called “the product”) is guaranteed by Ryobi
(hereinafter called “the Company”) to be free from
defects in material or workmanship for a period of 24
months from the date of original purchase covering
both parts and labour. Under the terms of this
guarantee, the repair or replacement of any part shall
be the opinion of the Company or its authorised agent.
Should service become necessary during the warranty
period, the owner should contact the RYOBI HELPLINE
1300 361 505 or contact the retailer from whom the
product was purchased.
In order to obtain guarantee service, the owner must
present the sales docket and Guarantee Certificate
to confirm date of purchase. This product is sold by the
dealer or agent as principal and the dealer has no
authority from the Company to give any additional
guarantee on the Company’s behalf except as herein
containedorhereinreferred to.
Guarantee Conditions
This guarantee only applies provided that the Product
has been used in accordance with the manufacturer’s
recommendations under normal use and reasonable
care (in the opinion of the Company) and such
guarantee does not cover damage, malfunction or
failure resulting from misuse, neglect, abuse, or used
for a purpose forwhich it was not designed or is not
suited and no repairs, alterations or modifications
have been attempted by other than an Authorised
Service Agent.This guarantee will not apply if the tool is
damagedbyaccident or if repairs arise from normal
wear and tear.
The Company accepts no additional liability pursuant to
this guarantee for the costs of travelling or
transportation of the Product or parts to and from the
service dealer or agent - such costs are not included in
this guarantee.
Certain legislation, including the Trade Practices Act,
1974 (as amended) and other state and territorial laws
give rights to the buyer and impose liability on the seller in
certain circumstances. Nothing herein shall have the effect
of excluding, restricting or modifying any condition,
guarantee, right or liability imposed, to the extent only
that such exclusion, restriction or modification
would render any term herein void.
BRISBANE : All enquiries Tel : 1300 361 505
TOWNSVILLE: All enquiries Tel : 1300 361 505
MELBOURNE: 960 Stud Road, Rowville,Vic. 3178
Tel : (03) 9764 8656
HOBART: All enquiries Tel : 1300 361 505
ADELAIDE: All enquiries Tel : 1300 361 505
PERTH: 33-35 Sorbonne Cres. Canning Vale, W.A. 6155
Address Of Dealer
Present This Form With Your Purchase Docket When Guarantee Service Is Required.
Tel: (02) 9792 9800 - Fax: 1800 807 993 - www.ryobi.com.au
Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz
For your record and to assist in establishing date of purchase (necessary for in-guarantee service)
please keep your purchase docket and this form completed with the following particulars.
This Guarantee Form Should Be Retained By The Customer At All Times
Date Model No Serial No
Tel : (08) 9455 7775
Other manuals for EAG2023CN
1
Table of contents
Other Ryobi Grinder manuals
Ryobi
Ryobi BG612GSB Quick setup guide
Ryobi
Ryobi RA-DG14-B User manual
Ryobi
Ryobi G-2500 Operation manual
Ryobi
Ryobi RAG950-125 User manual
Ryobi
Ryobi EAG2023RG Operation manual
Ryobi
Ryobi HBG620 Operation manual
Ryobi
Ryobi RAG1010-125SF User manual
Ryobi
Ryobi R18ROS User manual
Ryobi
Ryobi AG700 User guide
Ryobi
Ryobi EAG750RB User manual
Ryobi
Ryobi AG400 User manual
Ryobi
Ryobi G-2350 Operation manual
Ryobi
Ryobi RBG6G User manual
Ryobi
Ryobi AG451 User manual
Ryobi
Ryobi EAG75125 User manual
Ryobi
Ryobi EAG2023CN User manual
Ryobi
Ryobi P422 User manual
Ryobi
Ryobi EAG900FK Operation manual
Ryobi
Ryobi CAG-180M User manual
Ryobi
Ryobi R18AG7 User manual
