Rosen ZE0800D User manual
8.5” TFT LCD Monitor with DVD Player
ZE0800D
User manual
Please read it carefully before you operate this player
Welcome
Thank you for buying the Roof Mount LCD Monitor with DVD player.
Please read this manual carefully before using the Roof Mount LCD
Monitor with DVD player in order to get the most out of all the features and
functions. Keep this manual in a safe place, as it can be a valuable tool in
helping you to understand all the features and functions.
Contents
Safety information.........................................................................1
DVD player features .....................................................................3
Setting up your DVD player ..........................................................7
Using your DVD player .................................................................10
Troubleshooting ............................................................................13
Specification..................................................................................14
Maintaining ...................................................................................15
Operation flow………………………………………………………….16
Safety information
Do not operate the unit in any way other than described within this
manual. Failure to follow the instructions within the manual will
invalidate your warranty.
SAFETY FIRST! Do not install the display where it may (i) obstruct the
driver’s vision, (ii) impair the performance of any of the vehicle’s
operating systems or safety features, including airbags, or (iii) impair the
driver’s ability to safely operate the vehicle.
When using the system, make sure you are firmly secured by your seat
belt to ensure you do not accidentally hit your head on the screen during
sudden braking or other incidents. If you are ever in an accident, injuries
can be more severe if the seat belt is not properly buckled.
Do not attempt to install or service your display by yourself. Installation
1
or servicing of the display by persons without training and experience in
electronic equipment and automotive accessories may be dangerous
and could expose you to the risk of electric shock or other hazards.
Be careful not to drain the car battery while using the unit with the car
engine stopped. To avoid draining the battery, it is suggested that the
vehicle engine always is running while using the unit.
Do not disassemble or alter the unit in any way. Failure to do so can
cause damage to the unit and invalid the warranty.
Never clean the surface of the screen with chemical solvent or corrosive
detergent, which may cause permanent damage to the TFT LCD
screen.
Avoid installing the unit wherever is under direct sunlight or near hot air
vent. Please note that the normal working temperature of the unit is
between -5℃to +50℃. If the internal temperature of the vehicle is
extremely high, a short cooling down period is necessary before
operating the unit.
WIf the temperature inside the car is very low and the monitor is
used soon after switching on the heater, moisture may form on
the panel of the unit. Turn off the unit immediately! Failure to do
so may cause the internal components to short. Allow the unit to
rest for about one hour to allow the condensation to disappear
before continue operation.
In extremely cold temperatures, the movement of the picture may be
slow and the picture may be dark. It is not a malfunction. The unit will
work normally once it reaches its operating temperature.
Do not drop or hit the LCD panel with a hard object, as it may cause
permanent damage to the LCD panel. Should LCD panel break, avoid
touching glass and fluid. If do, please clean it with plenty of water and
ask for medical attention immediately.
Due to different car specifications, please kindly ensue that the display
monitor is properly located and not obstructing the air-conditioning vent.
Avoid inserting any foreign objects into the slot of the disc Player.
Failure to observe this may cause malfunction due to the precise
mechanism of this unit.
Protect your disc. When you leave the car, be sure to eject the disc from
this unit and store it separately away from direct sun light.
Heat and humidity may damage the disc and you may not be able to
play it again.
Use the supplied screws to fix the monitor Metal Mounting Plate.
2
FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject of the following
two conditions: (1) this device may not cause harmful interference, and(2) this device
must accept any interference received, including interference that may cause undesired
operation.
DOLBY: Manufactured under license from Dobly Laboratories. “Dolby” and the double-D symbol
are trademarks of Dobly laboratories.
DVD player features
This player is a Roof Mount 8.5" TFT-LCD Color Display with DVD player
that can be used as a stand-alone display, or can be integrated into a
mobile multimedia system. This player has the following features:
8.5" TFT-LCD color monitor (16:9)
Roof Mounting Application
Pixel (dots): 234RGB(W) x 480(H)
Wide Viewing angle (up/down/left/right): 45/55/65/65
NTSC and PAL Compatible
Adjustable Color/Contrast/Brightness/Tint
Manual Viewing Angle Adjustment
Yellow LED Dome Light
Automotive Startup Protection
Built-in IR Transmitter for IR Wireless Headphone
IR Remote Control
On Screen Display
1xAV Input
1xAV Output
Slot-in DVD mechanism
Capability to read: DVD Format
/DVD±R/DVD±RW/CD-DA/CD-RW/MP3
Audio output-FMT: The unit shall have a built in FM Transmitter and an
additional Line Audio Out for FMM, with switched12volt control line
FM Transmitter for listening the audio from your car audio system via
FM radio receiver (setting frequency: 88.1~107.9MHz)
Note: Multi-session CDs and 320kbps WMA files cannot be played on this
player.
3
DVD VIDEO FEATURES
This unit provides the following functions in addition to high image quality
and sound quality of DVD video:
Multi-sound Function
DVD audio can store up to 8 languages for one film. This allows for the
selection of language of ones preference.
Multi-angle Function
A DVD video that is filmed from multiple angle which allows you choosing to
view from different perspectives.
Subtitle Function
A DVD video can record subtitles for up to 32 languages to choose from.
4
DISC PLAYBACK
This DVD player can play the following formats.
About CD Extra discs
A CD Extra disc is a disc in which a total of two sessions have been
recorded. The first session is Audio session and the second session is the
Data session.
Your personally-created CDs with more than 2 data sessions recorded
cannot be played on this DVD Video Player.
MP3 Playback
This unit can play back CD-R/CD-RW discs on which MP3 music data have
been recorded.
Region Numbers
The DVD Video System assigns a region number to DVD video player and
DVD disk by Sales area. The DVD video region number is marked on the
disk Jacket as shown below.
Ex.
5
DISPLAY
1. Reset button: Press with a pencil or other narrow-tipped tool to rest the
player.
2. Dome Light: Provides an interior light for the vehicle.
3. : Press to eject the disc.
4. : Press to play or pause a disc.
5. : Press to move cursor left or skip the previous chapter on DVD or
track on CD;
6. ENTER: Press to confirm the items or settings.
7. ▲: Press to move cursor up; Press and hold it to fast reverse playback at 2x,
4x, 8x, 16x and 32x speeds.
8. IR window: Receives IR signals from the remote control and sends IR
signals to IR wireless headphone.
9. : Press to move cursor right or skip the next chapter on DVD or track
on CD;
10. ▼: Press to move cursor down; Press and hold it to fast forward playback
at 2x, 4x, 8x, 16x and 32x speeds
11. SOURCE: Press to switch DVD PLAYER, INTERNAL GAME and
EXTERNAL DVD.
12. :
6
In the FMT mode, press to turn on or off FM transmit
Hint: Please slide the switch of the player back to the FMT position.
In the FMM mode, press to switch audio output mode speaker or IR
headphone.
Hint: Please slide the switch of the player back to the FMM position.
13. Panel open button: Press to open the LCD panel.
14. LCD screen shut off switch: Press to turn off the LCD screen
15. AVX IN: Use to the extra audio or video input.
16. Dome Light switch: Move to the ON/OFF position, then press it to turn
the dome light on or off.
This function can be operational only when the green wire of the
dome light is connected to the door sensor.
The dome light will switch off after the car door is closed.
Setting up your DVD player
PACKAGE CONTENTS
Name of parts Quantity
Player 1
IR remote control with battery 1
AV cable 1
ST4.2x16 screw 6
CM 4x10 screw 4
Metal mounting plate 1
User’s manual 1
Rubber gasket 1
Use only the contents of this package to install and use the DVD
player. Use of any accessories not provided with this player may
7
result in damage to the player.
Installing your DVD player
Note: Do not attempt to install or service your player by yourself. Installation or
servicing of the player by persons without training and experience in electronic
equipment and automotive accessories may be dangerous and could expose
you to the risk of electric shock or other hazards.
Wiring and connections
To install the player
1. To prevent short circuits, remove the key from the ignition and disconnect the
terminal of battery.
2. Attach the metal mounting plate to the roof using the screws.
3. Connect input and output cables.
4. Connect the wire harness in the following order: ground wire, battery wire,
ACC wire and door wire.
5. Attach the DVD player to the metal mounting plate using the CM 4x10
screws.
8
6. Reconnect the terminal of the battery.
Cutting the headliner and mounting the bracket.
STEP1: LOCATE THE MOUNTING POSITION
Using masking tape or chalk, mark the side-to-side centerline of the headliner.
Next, mark forward to aft position, which locates the display as far forward as
possible, but rearward of the front seats.
STEP2: CHECK THE CONTOURS
Using the cutout template located in the mounting position from Step 1, check
the headliner for contours. Contours in the headliner will require modifications
to the trim ring. For extreme contours, you may need to use an optional tall trim
ring. Modifying the trim ring to follow the contours is required to avoid problems
ranging from no disc eject to poor latch retention.
STEP3: CUT THE HEADLINER
Once you are satisfied with the location, using the cutout template cut the
openings for the cabbies and four mounting screws. You may also need to cut
an opening to slide the mounting bracket through the headliner.
9
Table of contents
Other Rosen Car Receiver manuals
Rosen
Rosen ClearVue II User manual
Rosen
Rosen XR1020U User manual
Rosen
Rosen DS-VW0710 User manual
Rosen
Rosen T10 Reference guide
Rosen
Rosen X10 User manual
Rosen
Rosen RE9269D User manual
Rosen
Rosen XR1020U User manual
Rosen
Rosen RE1043D User manual
Rosen
Rosen R6400V User manual
Rosen
Rosen DS-TY1080 User manual
Rosen
Rosen DS-MZ0750 User manual
Rosen
Rosen DS-TY1070 User manual
Rosen
Rosen RE8169D User manual
Rosen
Rosen Mazda 3 User manual
Rosen
Rosen DS-HD0710 User manual
Rosen
Rosen A10 User manual
Rosen
Rosen 410X User manual
Rosen
Rosen DS-GM1010 GM Series User manual
Rosen
Rosen G10 User manual
Rosen
Rosen AV7000 Reference guide
