USING THE UNIT SAFELY
001
• Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
...........................................................................................................
002a
• Do not open or perform any internal
modifications on the unit..
...........................................................................................................
003
• Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as listed on
the “Information” page.
...........................................................................................................
013
• In households with small children, an adult
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.
...........................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
118b
• Keep the included screws and the camera adapter
in a safe place out of children’s reach, so there is
no chance of them being swallowed accidentally.
...........................................................................................................
IMPORTANT NOTES
356
• Do not allow rubber, vinyl, or similar materials to remain
on the unit for long periods of time. Such objects can
discolor or otherwise harmfully affect the finish.
354b
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a
piano light), or powerful spotlights to shine upon the same
area of the unit for extended periods of time. Excessive
heat can deform or discolor the unit.
401a
• For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure to wipe the
unit thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
• Be careful that no person or other equipment bumps any
portion that protrudes when this product is installed.
• You must remove this product before transporting the RK-
500.
• Be careful not to pinch your fingers when attaching or
removing the stand, or when adjusting the length or angle.
• Before using this product, check that no screws have come
loose.
• Do not attach a camera weighing more than 300 g to the
camera stand.
Main Specifications
(Including camera adapter and grip section)
Length: 525 mm
20-11/16 inches
Weight: 0.9 kg / 2 lbs
962a
* In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change
without prior notice.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The ●symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Attachingastand
Attachingacamera
1
Camera stand for the RK-500 BST-RK500 Owner’s Manual
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”
and “IMPORTANT NOTES.” These sections provide important information concerning the
proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, owner’s manual should be read in
its entirety. The manual should be saved and kept on hand as a convenient reference.
Screwthecameraadapterintothestand.
2Loosenthescrewshowninthediagram.
3Attachthecameraandtightenthescrews
showninthediagram.
4Afteryou’veattachedthecamera,adjust
theangleofthestandaswell.
1Useascrewdrivertoremovethescrews
fromtheindicatedlocationsontheVIMA’s
rearpanel(twolocations).
2Tightentheincludedscrewstofastenthe
stand.
3Adjustthelengthorangle.
®
BST-RK500_je1.fm 2 ページ ２００６年５月３１日 水曜日 午前１１時２８分
