Rockwell Automation 1336 PLUS User manual

Instructions

This publication will guide you through installation (or replacement)

of the 1336 PLUS Language Module.

1. Check the version of ﬁrmware presently installed in the drive.

If the current version is 1.04 or greater, proceed to step 2.

If you have version 1.03, parameters 111-127 and 180 must be

checked. The value of each parameter must be greater than zero

and less than 212. If any value is outside of this range, reprogram

using the Program mode before proceeding to step 2.

Important:

Ifparameters127and/or180aresetto“0”(zero),these

must be reprogrammed to “1.”

If the above is not performed, an "EE Init Read" fault (F53) will

be issued when the drive is powered up with the new Language

Module.

2. Remove and lock-out all incoming power to the drive. Remove

the drive cover.

!ATTENTION: This drive contains ESD (Electrostatic

Discharge) sensitive parts and assemblies. Static control

precautions are required when installing, testing, servicing

or repairing this assembly. Component damage may result

if ESD control procedures are not followed. If you are not

familiar with static control procedures, reference A-B

publication 8000-4.5.2, “Guarding Against Electrostatic

Damage” or any other applicable ESD protection

handbook.

!ATTENTION: To avoid a shock hazard, assure that all

powertothedrivehasbeenremovedbeforeproceedingwith

thefollowingprocedure.Inaddition,verifythattheDCbus

hasdischargedbymeasuringacrossthe“+DC”and“–DC”

terminals of TB1 with a voltmeter. The voltage should be

0.0V DC.

1336 PLUS Language Module

Installation/Replacement

21336 PLUS Language Module Installation/Replacement

3. Using the ﬁgure above, locate the Language

Module for your drive and note orientation.

On 0.37-3.7 kW (0.5 - 5 HP) drives, the HIM

and cradle must be removed before

proceeding.

A. To remove the HIM, slide it down and

out of its cradle.

B. Remove the cradle by taking the 4 corner

screws out. Position the cradle and

attached cable out of the way.

0.37-3.7 kW (0.5-5 HP) Only

LANGUAGE MODULE

ALLEN-BRADLEY

LANGUAGE MODULE

ALLEN-BRADLEY

Frames A1 - A4 Frames B - G

JOG

ESC SEL

JOG

ESC SEL

JOG

ESC SEL

LANGUAGE MODULE

ALLEN-BRADLEY

1336 PLUS Language Module Installation/Replacement 3

4. Remove the module by squeezing the sides-

in, and pulling outward. Discard module.

5. Position the new Language Module on the

Main Control Board, using the silk screen

outline on the board as a guide.

6. Carefully align the module connector with

the Main Control Board connector. Firmly

press the module onto the Main Control

Board until fully seated. The module will

“snap” (lock) in place.

7. Replace HIM and cradle (if removed).

Replace drive cover and restore power to the

drive. An

F53, F54

F66

fault will occur.

Reset parameters to the factory default values

– then, clear the fault by pressing the Stop

key or cycling power. The drive may now be

programmed as required.

Important:

Each module contains English

and an alternate language. The

factory default setting for the

[Language] parameter is

“English.” To program and

operate the drive in the alternate

language, the [Language]

parameter must be programmed

to the alternate language.

LANGUAGE MODULE

ALLEN-BRADLEY

LANGUAGE MODULE

ALLEN-BRADLEY

LANGUAGE MODULE

ALLEN-BRADLEY

JOG

ESC SEL

Publication 1336 PLUS-5.5 – May, 1996 P/N74001-007-01(C)

Table of contents

Other Rockwell Automation Control Unit manuals

Rockwell Automation

Rockwell Automation Allen-Bradley 1734-232ASC User manual

Rockwell Automation

Rockwell Automation Allen-Bradley 800G-XBx-EX User manual

Rockwell Automation

Rockwell Automation Allen-Bradley 1746-HSCE User manual

Rockwell Automation

Rockwell Automation Allen-Bradley EtherNet/IP User manual

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-HIST1G User manual

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX 5000 Series User manual

Rockwell Automation

Rockwell Automation 193-EGF Series User guide

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20-750-PNET User manual

Rockwell Automation

Rockwell Automation Reliance Electric LiquiFlo 41L4060 User manual

Rockwell Automation

Rockwell Automation Allen-Bradley Guard I/O DeviceNet 1732DS-IB8 User manual

Rockwell Automation

Rockwell Automation FlexPak 3000 OIM User manual

Rockwell Automation

Rockwell Automation Allen-Bradley 193-EGJ Series User guide

Rockwell Automation

Rockwell Automation Allen-Bradley SynchLink 1756-DM Series Guide

Rockwell Automation

Rockwell Automation Allen-Bradley 794-IRT8 User manual

Rockwell Automation

Rockwell Automation Allen-Bradley POINT I/O B Series User manual

Rockwell Automation

Rockwell Automation 2711P-RPA User manual

Rockwell Automation

Rockwell Automation 1768-L43 User manual

Rockwell Automation

Rockwell Automation ControlLogix 1756-EN2TR User manual

Rockwell Automation

Rockwell Automation AB quality Allen-Bradley 1746-INT4 User manual

Rockwell Automation

Rockwell Automation DeviceNet ArmorBlock A Series User manual

Rockwell Automation

Rockwell Automation ControlLogix 1756-M02AE Instruction manual

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix B Series User manual

Rockwell Automation

Rockwell Automation Allen-Bradley ArmorBlock 1732E-IB8M8SOER User manual

Rockwell Automation

Rockwell Automation Trusted TMR User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual