Robe Anolis ArcDot-US User manual
1
Version 2.2
QR code for user manual
2
ArcDot-US
The Anolis ArcDot-US is a Cree MC-E RGBW multichip based high powered multicolored LED xture.
The unit´s high light output can be pixel mapped and therefore can be controlled and used for large scale
matrix applications, as well as used for individual illuminating needs. Cast aluminium housing with frosted UV
stable polycarbonate dome allows exible solutions to both interior and exterior environments. The product is
manufactured in two versions:
Version 1- with two supply cables Version 2-with one supply cable and T-connector
1. Attention
Do not install the module near high inammable liquids or materials
Do not allow anything to rest on the module
Do not install the module near the naked ames
Do not install the module in dirty,dusty or badly ventilated location
Avoid using the unit in locations subject to possible impacts.
Avoid looking directly into the LED light beam at close range.
Warning: Operation of this equipment in a residential environment could cause
radio interference.
Resistance of the equipment is designed for electromagnetic environments E1, E2, E3
according to the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family
standard for audio, video, audiovisual and entertainment lighting control apparatus for
professional use. Part 2: Immunity.
The installation company should measure levels of possible interferences above the tested levels
E1,E2,E3 given by this standard (e.g. transmitters in surrounding area) before installing the equipment.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility
of multimedia equipment – Emission Requirements according to class A.
2. Installation
Four holes (5) of diameter of 5.5mm in the ArcDot base (2) serve for mounting the base on a non-ammable
at surface. The supply cable (s) can be led through the slots (3) in the housing (1) of the ArcDot or through
the aperture (6) in the ArcDot base .
1. Fasten the ArcDot´s base (2) on the mounting surface. Keep its orientation as shown on the picture above
(sign DOWN has to lead down).
Outside view of base Iinside view of base
3
2. Put the housing on the base, turn it to the right and secure with the screw M5 (4).
3. Connect ArcDots each other and to the power supply.
Use the following ways for connecting ArcDots with two supply cables(example for matrix of 4x4).
Horizontal sorting Vertical sorting
3. Technical specications
LED device: Cree MC-E RGBW multichip
Max. current per colour: 520 mA
Maximum power consumption: 5.5 Watts/48V
Power supply: 30-50 V DC ;suitable for damp locations
30 V DC max. ;suitable for wet locations
Compatible power supplies: ArcPixel Power-US, ArcPower Unit Pixel Rack Mount US,
ArcPower Unit Pixel Wall Mount US, ArcPower Unit Pixel
Rack Mount US LV, ArcPower Unit Pixel Wall Mount US LV,
DRS
Projected Lumen Maintenance: L90B10 >90.000 hrs, Ta = 25°C / 77°F
Cooling system: convection
Surface operating temperature: +35°C @ ambient 25°C
Ambient operating temp.range: -20°C/+50°C
Control electronics:
Internal chip protection against overheating
Flicker-free operation (300 Hz current driving of LEDs)
Status messages for communication with power supply unit
Design:
Housing & base: cast aluminium
Dome: frosted polycarbonate
Weight: 0.2 kg
Mounting: via 5 holes in base
IK rating: IK10
Data cables: Li9Y11Y, 2xAWG16+1xAWG 20(length according
requirement, standard length is 0.25m IN and 0.18m OUT)
Connectors:
Version 1: 1x Chogori CGRBB-03BMMA-SL8001 (male); 1x Chogori CGRBB-03BFFA-SL8001 (female)
Version 2: 1x Chogori CGRBB-03BMMA-SL8001 (male), 1x T-connector Chogori T-CGRBA-030303FFM-TS
4
Dimensions (mm):
4. Wiring of ArcDot connectors
Input Output
Chogori CGRBB-03BMMA-SL8001 (male) Chogori CGRBB-03BFFA-SL8001 (female)
1 GND (blue wire) 1 GND (blue vire)
2 +48V (red wire) 2 +48V (red wire)
3 Data (orange wire) 3 Data (orange wire)
5. Accessories
(P/N 13051564) T-connector Chogori T-CGRBA-030303FFM-TS /for product version 2 only/ 1x
(P/N 13052784) Cable Connection DRS/RU Pixel (CGR-F/bare,3pin, 1.5m)*
(P/N 13052738) Cable Connection DRS/RU Pixel (CGR-F/bare,3pin, 0.2m)*
(P/N 1305 2023) Connection cable ArcDot, 2m *
(P/N 1305 2024) Connection cable ArcDot, 4m*
(P/N 1006 2330) Active Terminator for ArcDot*
(P/N 1006 2331 Passive Terminator for ArcDot*
(P/N 13052738) Cable Connection DRS/RU Pixel (CGR-F/bare,3pin,0.2m)*
* quantity depends on size of installation
Version 2.2
June 22, 2019
Specications are subject to change without notice.
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
Other Robe Lighting Equipment manuals
Robe
Robe Colormix 240 AT User manual
Robe
Robe ColorWash 575E AT User manual
Robe
Robe ROBIN Pointe User manual
Robe
Robe ANOLiS Eminere Remote UV 2 User manual
Robe
Robe Color Spot250AT User manual
Robe
Robe Anolis Eminere 1 User manual
Robe
Robe Haze 400 FT User manual
Robe
Robe ColorSpot 250 AT User manual
Robe
Robe DigitalSpot 7000 DT User manual
Robe
Robe Anolis UVinere Remote 1 User manual
Robe
Robe DMX Control 512 User manual
Robe
Robe Led Blinder 196 LT User manual
Robe
Robe Robin Esprite User manual
Robe
Robe REDBLINDER 2-48 User manual
Robe
Robe ColorSpot 700E AT User manual
Robe
Robe Robin CycBar UV User manual
Robe
Robe Anolis ArcSource Outdoor 24 MC Integral RGBW User manual
Robe
Robe ROBIN LEDBeam 350 RGBA User manual
Robe
Robe Anolis ArcSource Outdoor 48 MC Integral RGBW User manual
Robe
Robe DigitalSpot 7100 DT User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
