Robam JZY-G370 User manual

JZ(Y/T)-G370

User Manual

Gas Hob

If the manual is lost, you can send e-mail to [email protected], request for an electronic manual.

Contents

Notice Items

Important Safety Information

Product Overview

Product Structure

Product Features

Product Parameter

Installation Instruction

Use Instruction

Clean and Maintenance

General Troubleshooting

Attachment

.......................................................................................................

..........................................................................

.............................................................................................

...........................................................................................

......................................................................................

..................................................................................................

................................................................................

...............................................................................

.........................................................................................................

Notice Items

Gas Hob

1. Please make sure the source of gas is in line with that noted on nameplate before

your installation of the product, otherwise it is strictly prohibited to use.

2. The minimum distance between the gas stove and gas resource should be no

less than 1 meter and connecting tube should be the matched special gas tube,

which should be replaced once a year at a regular limitation. The regular length of

the tube should be 1-1.5 meter as preferred. It is highly required that the tube should

be avoided from pressing, heavy bending or aging. The joining point should be

carefully checked to avoid any possibility of leaking and any potential damage from

the leaking.

3. Leave the valve of the gas inflow tube under normal situation. The leaking test

should be done after any abnormal change of the valve. (Put the low-concentrated

cleaning solution to the joint point and then turn on the valve to check whether any

air bubble appears, if there were any air bubble, the valve should be turned off

immediately and fix the problem. It cannot be used until the problem is completely

solved).

4. The fixing metal joint should be installed strictly according to the operation

manual, which lays in the “package of the fixing metal joint” or installed by the

professional staff, if the tube is connected by the fixing metal joint. The test of

leaking should be done before use. (The way of leaking test above is for your

reference ).

5. The gas stove should be installed on the place of well-ventilated, but should be

avoided from the strong wind.

6. Do not try to cover the flame on the gas stove, or put anything tinder around.

Besides the gas stove cannot be used to for drying towel or clothes, etc.

7. Do not have the immediate touch on the flame-around area, such as work stand,

burner or cooktop after the use of the gas stove.

8. Do not try to beat the cooktop, and the special attention should be paid to

keeping the gas stove in good condition during the transport and installation.

WARNING: THE GAS STOVE SHOULD BE ONLY CONNECTED BY THE

QUALIFIED SPECIAL TUBE(e.g. the tube made of UV-PSA, Buna-N rubber ). IT IS

HIGHLY PROHIBITED FROM USING NORMAL RUBBER TUBE, FOR THE

POSSIBLE CHEMICAL REACTION MAY HAPPEN WHEN THE NORMAL RUBBER

TUBE MEET OZONE/LIQUID OIL, WHICH WILL POSSIBLY CAUSE THE DAMAGE

OF THE TUBE AND THE RELATED POTENTIAL ACCIDENTS.

◆This appliance is designed for domestic household use and for the cooking and frying of domestic foodstuffs.

◆IMPORTANT: The adjacent furniture and all materials used in the installation must be able to withstand a

minimum temperature of 85℃ a bove the ambient temperature of the room it is located in, whilst in use.

◆Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at

temperatures below the guidelines given above.

◆Any damage caused by theappliance being installed in contravention of this temperature limit, will be the

liability of the owner.

◆Your new appliance is guaranteed against electrical or mechanical defects, subject to certain exclusio that are

noted in ROBAM APPLIANCES CO.,LTD.conditions of guarantee. The foregoing does not affect your statutory

rights.

◆The use of this appliance for any other purpose or in any other environment without the express agreement of

ROBAM APPLIANCES CO.,LTD.will invalidate any warranty or liability claim.

◆You should not use this appliance to store items on or as a work surface.

◆Do Not Modify This appliance.

◆You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance.

Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may

fuse to the surface.

◆Repairs may only be carried out by ROBAM APPLIANCES CO.,LTD.service engineers or their authorized

service agent.

Gas Hob

9. Once any leaking tested, the valve should be turned off immediately and the

window should be open to keep ventilated. The electric fan or range hood or any

other electric appliances are prohibited to use, and keep the fire away. Meanwhile,

please contact professional staff.

10. If there were any abnormal sound such as whir heard, or the color of flame

turned from dark to light or turned muddy, the backfire from the burner might be

happened, or accidentally extinguished. Please turn off the switch, and check

whether the burner and copper core are well-positioned. Turn on the switch in a

minute after the check.

11. Each time of turn-on the switch should be no more than 20 seconds to avoid

from deflagrating. If the switch cannot be turned on within five times, please contact

the service immediately.

12. The children are prohibited to use the gas stove in the case of safety concern.

13. The installation and any maintenance should be taken only by the professionals.

14. Be sure to keep your head away from the burner while the operation of turn-on

gas stove. Please turn off the valve of gas and switch of gas stove after the use to

avoid from any possible accident.

15. Be sure to keep any heat conductor such as metal knife, fork or cover away from

the heat.

Important Safety Information

General

Information

THIS PRODUCT BELONGS TO THE EMBEDDED HOUSEHOLD GAS STOVE, YOUR SAFETY

IS OF THE UTMOST IMPORTANCE TO ROBAM APPLIANCES CO.,LTD.PLEASE MAKE SURE

THAT YOU READ THIS INSTRUCTION BOOKLET BEFORE ATTEMPTING TO INSTALL OR USE

THE APPLIANCE. IF YOU ARE UNSURE OF ANY OF THE INFORMATION CONTAINED IN THIS

BOOKLET, PLEASE CONTACT THE ROBAM APPLIANCES CO.,LTD.

Gas Hob

General Safety

◆Installation must be carried out by an AUTHORISED PERSON in accordance with the regulation in force.

◆Care should be taken to ensure that the units and work surfaces that you build the appliance into, meet with

The relevant standards.

◆This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

◆DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR NEAR

THIS APPLIANCE.

◆DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.

◆DO NOT MODIFY THIS APPLIANCE.

◆DO NOT USE THIS APPLIANCE AS A SPACE HEATER.

Child Safety

◆ROBAM APPLIANCES CO.,LTD.strongly recommend that babies and young children are prevented from

being near to the appliance and not allowed to touch the appliance at any time. During and after use, all

surfaces will be hot.

◆If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under.

close supervision at all times.

◆Older children should only be allowed to utilise the appliance when supervised.

◆Children should be supervised to ensure that they do not play with the appliance.

During Use

◆Any film or stickers that are present on the hob surface when it is delivered should be removed before use.

◆These instructions are only valid if the country symbol appears on the appliance.If the symbol does not appear

on the appliance, it is necessary to refer to the technical instructions, which will provide the necessary

instructions concerning modification of the appliance to the conditions of use of the country.

◆Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the

adjustment of the appliance are compatible.

◆The adjustment conditions fro this appliance are stated on the label (or data plate).

◆This appliance is not connected to a combustion product evacuation device.It shall be installed and connected

in accordance with current installation regulations. Particular attention shall be given to the relevant

requirements regarding ventilation.

◆CAUTION: The use of a gas cooking appliance results in the production of heat and moisture in the room in

which it is installed. Ensure the kitchen is well ventilated, keep natural ventilation holes open or install a

mechanical ventilation device(mechanical extractor hood).

◆CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example

room heating.

◆Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window

or more effective ventilation, for example increasing the level of mechanical ventilation where present.

◆Care should be used when utilising the appliance, otherwise there is a risk of burns being caused.

◆You should not allow the electrical connection cables to come into contact with the hob surface when it is hot

or any hot cookware.

◆If fat and oil overheats, then it can ignite extremely quickly. For this reason, when cooking with fat and oil the

appliance should not be left unattended.

◆Make sure that all of the cooking zones are switched off after use.

CAUTION: “In case of hotplate glass breakage(Glass panel cooker only):

- shut immediately off all burners and any electrical heating element and isolate the appliance from the

power supply

- do not touch the appliance surface

- do not use the appliance.”

Dear Users:

Thank for your buying our gas hob. This gas hob adopt advanced technology, fashion design and optimistic

structure. This gas hob has high heat efficiency and safe operation, too.

Please read this operation manual carefully before installation or operation of this product. Meanwhile, please

keep it properly for future reference.

Product Overview

Product Structure

( . , ).This picture is only for your reference There are series of models we don’t list all of them one by one

Pan support

Internal Cap

External Cap

Adornment disc

Knob

Chassis

Ignition Needle

Thermocouple

Burner

Gas Hob

Product Features

1. Fashionable design: The design of model and structure comply with fashion and adapt to modern kitchen.

2. Excellent quality: Top quality of accessories with trustable quality, long life expectancy.

3. Electronic pulse with flame failure safety device on each burner and high thermal efficiency.

4. Full air in flow: Built-in structure with full air in flow , cooktop supplyment air, air valve adjust flexibly, burn

completely and easy to install.

5. Pan Diameter limits

Wok burner (4.4kW): 220mm ~ 300mm

Semi-rapid burner (1.8kW): 160mm ~ 220mm

Remark: It's prehibited to use a vessel that overlap its edges.

Using inappropriate hob guards can cause accidents.

Panel

Product Parameter

Item Name

Product Size(mm)

Air in flow

Panel

Ignition Method

Flame failure safety device

Gas Hob

860×500×157

13.2

Full

820×450

Electronic Pulse

Yes

See the Nameplate

Net Weight(kg)

Stainless Steel

φ9.5mm special gas rubber gasket (G1/2 inch special metal gasket)

”

See the Nameplate

Model

Hob Element Number

Size Of Openings(mm)

Gas inlet connection

Gas Category type,

Rated gas pressure

Nominal heat input

JZT-G370

JZY-G370(Non Malaysia)

Gas Hob

φ9.5mm special gas rubber gasket (G1/2 inch special metal gasket)

”

Flame failure safety device

Item Name

Model

Gas Category, type

Gas inlet connection

Product Size(mm)

Hob Element Number

Air in flow

Panel

Ignition Method

860×500×157

13.2

Full

820×450

Electronic Pulse

Yes

28-30 mbar

Net Weight(kg)

Size Of Openings(mm)

Total: 10.6kW (771g/h)

Left burner: 4.4kW (320g/h)

Middle burner: 1.8 kW (131g/h)

Right burner: 4.4kW (320g/h)

I3B/P(30), G30, G31 or their mixtures

Injector Dia. (mm)

Rated gas pressure

Nominal heat input

Gas Hob

JZY-G370(Malaysia)

Note:

1. Parameters indicate for reference only. The exact datas should be confirmed on the nameplate on the gas

hob.

2. The installation size of built-in gas hob should be confirmed by the specification on the templet in the carton.

3. We keep right to alter design or specification.

0.92 & 0.45(Wok burner)

0.66(Semi-rapid burner)

Stainless Steel

Gas Hob

Installation Instruction

between the Gas Hob and noncombustible should be not less than 7 cm; The Gas Hob and the above object

should have a height of more than 100cm, If you want to install a Rang Hood, the height of 65-75cm from the

Gas Hob is suitable. (This space is set up according to the installation requirements of the Range Hood).

2. The kitchen cabinet for built-in gas stove should be specially designed for the safety concern. The ventilated

borehole should be suitable for the safety requirement and the size should be no less than 100 cm .

3. When the special gas tube is used, one side of the tube should be connected with the gas valve while the

other side connected with the inflow side of gas stove. Please take off the cover on the connection point and put

the tube to cover the red-mark point, and tighten it with the anchor ear. Be sure that the leaking test should be

taken before use.

4. The size of the borehole should be taken according to the requirement, and put the built-in gas stove to match

the borehole.

5. If the G1/2”inch connector is used, please make sure to put the rubber gasket inside the connector and the

leaking test should be taken before use.

6. The qualified reduction valve should be used when the LPG is used as the source of the gas.

When the Gas Hob is installed, the distance from the combustibles is not less than 15cm, and the distance

Requirement for hole size

Hoop

Red thread

Hose connector

Rubber hose

Gas inlet of stove

Rubber washer

Metal corrugated pipe

Rubber washer

Front valve

Rubber hose diagram A schematic diagram of a metal bellows

Min550

820 +2

450 +2

Min50

Gas Hob

8. When the copper cover is placed, the positioning rod is inserted into the positioning hole on the burner seat

and is placed in place to ensure that it is not moved.

Positioning rod

Positioning hole

Bottom functional location diagram

1. Be sure the copper core, copper cover and pan stand in right position. Check the switch first before turn on

the valve of the gas. (Pic1)

2. IGNITION METHOD: Push the switch and turn to 90 degrees anti-clockwise for the strongest flame, (Pic2)

meanwhile the poop sound of pulse firing can be heard. The full push should be taken for 3-5 seconds till the

flame comes out. Otherwise, the same operation above should be retaken. In addition, push the switch and turn

to 90 degrees anti-clockwise again is the smallest flame. (Pic3)

Remark: The device shall not be operated for more than 15 s. If after 15 s the burner has not lit, stop operating

the device and open the compartment, door and/or wait at least 1 min before attempting a further ignition of the

burner.

Use Instruction

REMARKS: The first ignition or that of the first reuse of the gas stove may not work immediately, because there

is air in the tube, it needs to be operated repeatedly.

3. SWITCH-OFF: Turn the switch to the position clockwise (Pic1) and the fire will be switched off.

4. FIREPOWER CONTROL: Operate according to the instruction mark.

5. Airflow control: Please adjust the inlet airflow, to make the gas fully fired.

Adjust the inlet spot nail or plate (at the bottom of hobs), by clockwise or anti clockwise, till the flame become

stable and blued colored (as following picture). Here is the way to differ the combustion states:

swtich off position

Pic1

strongest

flame position

Pic2

weakest flame position

Pic3

Battery installation position

The position of the air inlet of the stove

Gas Hob

Normal

(Full Combustion)

Yellow Flame

(Air deficiency)

Floating Flame

(Air superabundant)

Combustion well: the flame takes on cyanine, no yellow flame or red fire, the interior and exterior flame is

clear.

Air deficiency: the flame is stretched and takes on yellow or red, the interior and exterior flame is faintly.

Air superabundance: the flame is unstable, about to leave the fire cover or flame becomes short obviously

(sometimes will occur backfire when using manufactured gas), and color of flame appear cyan.

Adjustable flame

damper plate

Adjustable flame

damper plate

Intake

1. Maintain gas hob surface: Please clean the surface with wet and neutral detergent cloth, and then clean with

dry cloth, Don’t use steel brush or other rigidity objects.

2. Check if the copper cover, copper core and ornamental ring are shift or biasing, and correct them at the right

position in time.

3. Please deal with used battery properly avoiding pollution.

4. This product use environmental and recyclable package, please deal with those packages properly in order to

protect environment and reduce waste.

5. If maintenance confirms this product can’t be used again, please deal with recyclable materials properly.

6. In order to keep ordinary usage and good combustion regime, operator must clean and dredge the fire hole

with brush and steel needle regularly to prevent fire from turning back and damage gas hob. Don’t bath this

product.

Flame port on copper core

Inner-ring flame port of copper cover

Flame port on copper cover

Ignition groove

(The figure is provided for reference only and subject to the actual product.)

Clean and Maintenance

Adjustable flame

damper plate

Intake

(Model No. with spot plate: JZT-G370)

This manual suits for next models

Table of contents

Other Robam Hob manuals

Robam

Robam HS44-W211 User manual

Robam

Robam JZ-B312 User manual

Robam

Robam JZY-B394 User manual

Robam

Robam Vigour Series User manual

Robam

Robam JZT B110 User manual

Robam

Robam cd28-w985 User manual

Robam

Robam JZY-B594 User manual

Robam

Robam JZ-B594 User manual

Robam

Robam JZY-ZB61H70 User manual

Robam

Robam CS46-W270 User manual

Robam

Robam JZ(Y/T)-G413 User manual

Robam

Robam JZY-B920 User manual

Robam

Robam B396 Series User manual

Robam

Robam JZY-B398 User manual

Robam

Robam JZY-B928 User manual

Robam

Robam JZ-B715 User manual

Robam

Robam JZT-B291 Mounting instructions

Popular Hob manuals by other brands

Siemens

Siemens EX875KYV1E INFORMATION FOR USE

AEG

AEG CERAMIC HOB 6010 K Installation and operating instructions

VALERA

VALERA CT 70A datasheet

Zanussi

Zanussi ZGF 6420 Instruction booklet

Gaggenau

Gaggenau CI 273 use and care manual

G3 Ferrari

G3 Ferrari Energy user manual

Pkm

Pkm IN4B instruction manual

Award

Award H903BG user manual

Zanussi

Zanussi VCH 5005 RZ Instruction booklet

Miele

Miele KM 523 Operating and installation instructions

Hotpoint

Hotpoint IS67V8CCXT/E manual

AEG

AEG HK854870XB user manual

Cookology

Cookology SEP600BK instruction manual

Bauknecht

Bauknecht Hob Instructions for use

Zanussi

Zanussi ZGM 782 Instruction booklet

dipo INDUCTION

dipo INDUCTION DIBK218S quick start guide

Miele

Miele KM 5987 Operating and installation instructions

Miele

Miele KM 360 G installation instructions