Roadpro RPSL-681 User manual

~.DADPRD®

the

...

living

Use and Care Guide

RPSL-681

300

Watt 12-Volt Direct-Wired

Ceramic Heater/Fan

For customer assistance and technical support call

1-866-622-7979 Monday through Friday 8 00

to 5 00

Eastern Tlrne.

or write to techsupport@roadprobrands com

IMPORTANT SAFEGUARDS

protect against electrical hazards,

not immerse cord, or unit in

water or other liquid.

Close supervision is necessary when used by or near children.

• Turn off unit & disconnect from battery when not in use.

Do not operate if cord is damaged; inspect cord regularly.

Do not use unit for applications other than its intended use.

• Never use

current to power this unit.

Use only when vehicle

running to avoid draining battery.

Do not use heater near flammable materials.

Do not block the back

the heater.

Do not place anything on

over the heater.

INSTALLATION PRECAUTIONS

When running through firewall, grommets should be used so that the wires

not rub on metal.

•

not obstruct air bags.

• When running wire into vehicle avoid placing the wire under carpeting.

• Do not twist or bind power cord as this may damage cord or cause

overheating.

RECOMMENDED INSTALLATION PROCEDURE

• Mount heater

desired location.

• Run wires through firewall. (Grommets should be used so that the wires do

not rub on metal).

Set heater

the "Off" position.

Connect

RED

wire to the positive

(+)

battery terminal.

• Connect BLACK wire to the negative

(---)

battery terminal.

• Connect an inline 30 Amp fuse to the red positive wire (not included).

Caution: reversing the polarity can damage heater and void warranty.

Amp

Inline

Fuse

heater

red

black

[

batte~

ALTERNATE INSTALLATION PROCEDURE

• Mount heater

desired location.

•

Run

wires to fuse panel.

• Set heater

the "Off" position.

• Connect

RED

wire to the positive terminal

the fuse panel capable

handling 30 amps. (refer to vehicle manufacturer's specifications)

• Install

inline 30

amp

fuse to the

RED

positive wire.

• Connect BLACK wire to ground.

OPERATION

• Position heater on your dash or other desired position.

• LED light above fuses indicated power to heater.

Select "heat" or "fan" mode. Indicators will light to show cooling (green)or

heat (red) function.

• Adjust fan speed depending on comfort level; clockwise for fasterspeed.

counter-clockwise for slower speed.

• Direct airflow as desired.

Use only when vehicle is running to avoid draining battery.

Table of contents

Other Roadpro Heater manuals

Roadpro

Roadpro RPSL-681 User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide