2 3
Save these instructions. For your safety,
read, understand, and follow the informa-
tion provided with and on this buffer. The
owner and operator of this buffer shall
have an understanding of it and safe op-
erating procedures before attempting to
use. The owner and operator shall be
aware that use of this product may require
special skills and knowledge. Instructions
and safety information shall be conveyed
in the operator's native language before
use of this product is authorized. If any
doubt exists as to the safe and proper use
of this product, remove from service im-
mediately. Inspect before each use. Do
not use if broken, cracked, melted, leak-
ing, smoking or otherwise damaged parts
are noted. Any buffer that appears dam-
aged in any way, or operates abnormally
shall be removed from service immedi-
ately. If the buffer has been or suspected
to have been dropped or immersed in liq-
uid, immediately discontinue use until it
has been checked by qualified person-
nel. Labels and Owner's Manuals are
available from manufacturer.
PRODUCTDESCRIPTION
Road Xpedition buffers/polishers are de-
signed to apply automotive type waxes and
to buff waxed metal and composite sur-
faces such as cars, trucks and fiberglass
boats. They are not suitable for sanding,
grinding, polishing (with abrasives), or
other duties not listed specifically above.
They should not be used on delicate sur-
faces or laminated wood surfaces, as the
heat generated by buffing may damage
the adhesive bond between layers.
Note: No user serviceable parts contained
in the buffer. Use factory authorized parts
only.
BEFOREUSE
1. Familiarize yourself thoroughly with the
operation of this product before using.
Practice on an exemplar of your in-
tended workpiece to get an idea of how
much wax to use and how much force
to use when pressing down on the
buffer. Experiment using different wax-
ing and buffing techniques to see what
works best BEFORE attempting to use
on a valuable car or boat finish.
2. THOROUGHLY CLEAN intended
workpiece before applying wax and/or
buffing. Any dirt left on the workpiece
will simply be ground into it, damag-
ing paint, primer and metal. The ap-
plicator and buffing pad covers will likely
be ruined by such use as well.
3. Inspect before each use. Do not use if
broken, cracked, melted, leaking,
smoking or otherwise damaged parts
are noted.
4. Ensure that the pad cover chosen for a
particular job is the proper one. The
softer, more plush pad cover is for buff-
ing purposes (removing wax), while the
other is suitable for applying wax.
DONOTATTEMPT TO BUFF SURFACE
WITH COARSE, SHORT PILE PAD
COVER. Failure to heed this message
may result in paint damage.
5. Ensure that the pad cover is installed
correctly. The pad cover shall be in-
stalled in such a manner that completely
and evenly covers the foam buffer pad.
6. Use chemicals which are compatible
with the painted finish you are working
with.
For All Double-insulated Tools
Foralltools:
1. Keep work area clean - Cluttered areas
invite injuries.
2. Consider work area environment -
• Don’t expose auto polisher to rain.
• Don’t use auto polisher in damp or wet
locations.
• Keep work area well lit.
• Do not use auto polisher in presence or
flammable liquids or gases.
3. Keep children away - Do not let people
or pets, especially children, contact
auto polisher or extension cord. Only
properly trained individuals should be
allowed in and around the work area.
4. Store auto polisher - When not in use,
store polisher in a clean, dry environ-
ment. Ensure polisher is out of reach
of children at all times.
5. Don’t force auto polisher - It will do the
job better and safer at the rate for which
is was intended.
6. Use right tool - Don’t force small tool or
attachment to do the job of a heavy-
duty tool.
7. Dress properly - Do not wear loose cloth-
ing or jewelry. They can be caught in
moving parts. Rubber gloves and non-
skid footwear are recommended when
working outdoors. Wear protective hair
covering to contain long hair.
8. Use safety glasses - Also use face or
dust mask if operation is dusty.
9. Do not abuse the cord - Never carry auto
polisher by cord or yank it to discon-
nect from receptacle. Keep cord from
heat, oil, and sharp edges.
10.Do not overreach - Keep proper foot-
ing and balance at all times.
Study, understand, and follow all in-
structions before operating this device.
Use only on hard, level, inanimate sur-
faces. Keep this product and the chemi-
cals related to its use out of the reach of
children. Do not leave operating buffer
unattended. Use only those attach-
ments and accessories provided by the
manufacturer. Do not modify or alter this
device. Failure to heed these markings
may result in personal injury and/or
property damage.
!
WARNING
When using electric tools, basic safety
precautions shall always be followed to
reduce the risk of fire, electric shock, and
personal injury or property damage.
Make sure the work area is clean. Do
not expose auto polisher to rain or use
in damp or wet places. Do not use auto
polisher in presence of flammable liq-
uids or gases. Prevent body contact with
grounded surfaces. Always use face or
dust mask if working area is dusty. When
auto polisher is used outdoors, use only
extension cords intended for outdoor
use. Do not use auto polisher if the
switch is malfunction. Do not put fingers
or any objects between the skirt and
buffer pad while polisher is on. Keep
children away in and around the work
area.
!
WARNING