Ringway TD90 User manual
TD90
User s Manual
Electronic Drum
Precaution
Thank you for purchasing this electronic instrument.For perfect operation and
security, please read the manual carefully and keep it for future reference.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the product.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings,install in accordance with the
manufacturer s instructions.
8) Do not install near the heat sources such as
radiators, heat registers,stoves,or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug.A
polarizedplug hase two blades with one
wider than the other.Agrounding type plug
has two blades and a third grounding
prong.The wide blade or the third prong are
provided for your safety,if the provided plug
does not fit into your outlet.consult an
electrician for replacement of the obsolete
apparatus. When a cart is used,use caution
when moving the cart/apparatus combination
to avoid injury from tip-over(Figure 1).
13) Unplug this apparatus during lightning
storms or when unused for a long periods fo
time.
14) Refer all servicing to qualified service
personnel.
Servicing is required when the apparatus has
been damaged in any way,such as power-
supply cord or plug is damaged,liquid has
been spilled or objects have fallen into the
apparatus,the apparatus has been exposed to
rain or moisture,does not operate normally,
or has been dropped.
WARNING:To reduce the risk of fire or
electric shock,do not expose this apparatus to
rain or moisture.
CAUTION:Apparatus shall not be exposed
to dripping or splashing and no objects filled
with liquids,such as vases,shall be placed on
the apparatus.
(Figure 1)
Contents
1
Electronic Drum
Panel Controls ..............................................................................................................2
Assembly Instruction .....................................................................................................4
Connection..................................................................................................................10
..................................................................................................12
1.Switch the Power On ................................................................................................12
2.Set the Main Volume ................................................................................................12
3.Enter and Return .....................................................................................................12
4.Tempo......................................................................................................................12
5.Select Drum Kits ......................................................................................................13
6.Kit ..........................................................................................................................14
7.Effect ...................... ................................................................................................23
8.Pad .........................................................................................................................23
9.Click ........................................................................................................................24
10.Song .....................................................................................................................25
11.Drum On/Off ..........................................................................................................26
12.Start/Stop ..............................................................................................................26
13.Rec/Play ................................................................................................................27
.............................................................................................................29
Content of LED-Display................................................................................................31
Drum Kits List .............................................................................................................32
Voice List ................. ..................................
............................................
.................................................
..................................................
Start to Play the Drum
14.Factory Set
................. ............................. ..................33
Song List........................................................................ .36
MIDI Implementation Chart ........................................ 37
Specifications............................................................ 38
BD KICKBD KICK
CRASHCRASH
RIDERIDE TOM3TOM3 TOM2TOM2 TOM1TOM1 SNARESNARE HI-HATHI-HAT HH-CTRLHH-CTRL
MASTERMASTER
OUTOUT
AUX INAUX IN
MIDI OUTMIDI OUT
MIDI INMIDI IN
POWERPOWER
ONON OFFOFF
Panel Controls
Front Panel
Rear Panel
26 25 24 23 22 21 20 27
DC 9V
28 29 30
31
2
In [KIT] Mode
In [PAD] Mode
In [SONG] Mode
Electronic Drum
1
2
345
6
7
8
9
10
11 12
13 14 15 16 17 18 19
32
TD90TD90
MIN MAXMIN MAX
VOLUME CONTROLSVOLUME CONTROLS
TEMPOTEMPO
ENTERENTER
KITKIT PADPAD
EFFECTEFFECT
CLICKCLICK
SONGSONG REC/
PLAY
REC/
PLAY
DRUM
ON/OFF
DRUM
ON/OFF
START/
STOP
START/
STOP
CLICKCLICK
CHOOSE: LEVEL/TIME SIGNATURES/SOUNDCHOOSE: LEVEL/TIME SIGNATURES/SOUND
REC/PLAYREC/PLAY
CHOOSE: RECORD/PLAY/CLEARCHOOSE: RECORD/PLAY/CLEAR
CHOOSE: M01,M02,M03 START/STOPCHOOSE: M01,M02,M03 START/STOP
ADJUST: VOLUMEADJUST: VOLUME
CHOOSE: M01,M02,M03 START/STOPCHOOSE: M01,M02,M03 START/STOP
SONGSONG
SONG SELECT START/STOPSONG SELECT START/STOP
ADJUST: VOLUMEADJUST: VOLUME
TO RESET A FUNCTION TO FACTORY DEFAULT VALUES, PRESS
+ AND - WHILE PRESSING THE DESIRED FUNCTION KEY.
FUNCTIONS THAT CAN BE RESET ARE KIT, PAD, EFFECT, CLICK
AND REC/PLAY.
TO RESET A FUNCTION TO FACTORY DEFAULT VALUES, PRESS
+ AND - WHILE PRESSING THE DESIRED FUNCTION KEY.
FUNCTIONS THAT CAN BE RESET ARE KIT, PAD, EFFECT, CLICK
AND REC/PLAY.
CHOOSE: M01,M02,M03CHOOSE: M01,M02,M03
KITKIT
CHOOSE: PAD / EFFECT / COPYKIT/TRIGGERCHOOSE: PAD / EFFECT / COPYKIT/TRIGGER
PAD SELECT: HHC,HH,BD/KICK,SN,T1,T2,T3,CR,RIPAD SELECT: HHC,HH,BD/KICK,SN,T1,T2,T3,CR,RI
ADJUST: INSTRUMENT/LEVEL/SENSITIVITY/
THRESHOLD/VELOCITY CURVE
ADJUST: INSTRUMENT/LEVEL/SENSITIVITY/
THRESHOLD/VELOCITY CURVE
CHOOSE: REVERB/CHORUSCHOOSE: REVERB/CHORUS
ADJUST: TYPE/LEVELADJUST: TYPE/LEVEL
R1,R2,R3,H1,H2,PLA,DLY,PDL,OFFR1,R2,R3,H1,H2,PLA,DLY,PDL,OFF
ADJUST: TYPE/LEVELADJUST: TYPE/LEVEL
CH1,CH2,CH3,CH4,FB,
FLG,SDL,FDL,OFF
CH1,CH2,CH3,CH4,FB,
FLG,SDL,FDL,OFF
COPY TO POSITION: 26-30COPY TO POSITION: 26-30
MAIN MENUMAIN MENU
MASTERMASTER PHONESPHONES AUX INAUX IN
HH-CTRLHH-CTRL HI-HATHI-HAT SNARESNARE TOM1TOM1 TOM2TOM2 TOM3TOM3 RIDERIDE
CRASHCRASH
BD KICKBD KICK
PHONESPHONES
MIN MAXMIN MAX MIN MAXMIN MAX
SAME/INDIVIDUALSAME/INDIVIDUAL
Front Panel
1. LED Display
2. DATA DIAL
3. [MASTER VOLUME] knob
4. [PHONES VOLUME] knob
5. [AUX IN VOLUME] knob
6. [TEMPO+] button
7. [TEMPO-] button
8. [ENTER] button
9. [RETURN] button
10. [+/-] button
11. [KIT] button
[EFFECT] button
[PAD] button
[CLICK] button
12. [SONG] button
[DRUM ON/OFF] button
[REC/PLAY] button
[START/STOP] button
Indicator Lamp
13. [HH-CTRL]
14. [HI-HAT]
15. [BD KICK]
16. [SNARE]
17. [TOM1]
[TOM2]
[TOM3]
18. [CRASH]
19. [RIDE]
Rear Panel
20. [HH-CTRL] jack
21. [HI-HAT] jack
22. [BD KICK] jack
23. [SNARE] jack
24. [TOM1] jack
[TOM2] jack
[TOM3] jack
25. [CRASH] jack
26. [RIDE] jack
27. [AUX IN] jack
28. [MASTER OUT] jack
29. [MIDI IN] jack
[MIDI OUT] jack
30. DC 9V
31. POWER ON/OFF
32. PHONES jack
3
Electronic Drum
4
1
2
3
1.Insert the left support into the
base rack clamp, tighten the
set-screw.
2.Set up the knighthead, tighten
the set-screw.
1.Insert the right support into
the base rack clamp, tighten
the set-screw.
2.Set up the knighthead, tighten
the set-screw.
1.Insert the mid-tube into left
and right support rack clamps.
Tighten the set-screw with
your tuning key.
2.Set up the knighthead.
Tighten the set-screw with
your tuning key.
Drum Stand Assembly
Assembly Instruction
(1)
(2)
(1)
(2)
(1)
(2) (2)
Electronic Drum
5
4
Insert the left and right support
arm into the rack clamp.
Tighten the set-screw.
Drum Pad Assembly
1
1.Insert the rod into the pad hole,
set to a fine- position and tighten
the screw.
2.Insert the pad rod into rack
clamp, set to a fine- position
and tighten the T-screw.
Cymbal and Hi-hat Assembly
Insert the cymbal stand(longer)
into the rack clamp and tighten
the T-screw.
1
Electronic Drum
2
Insert the Hi-Hat stand(the shorter one)
into the rack clamp and tighten the
T-screw.
3
1.Take out the wing nut and felt
washer.
2.Place the cymbal over the tilter
peg. put the felt washer and
wing nut onto the cymbal. Tilt
the cymbal to your preference.
1
1.Insert the module into the rack
clamp.
2.Tighten the T-screw.
Module Assembly
6
felt washer
wing nut
Hi-Hat Cymbal Crash Cymbal
Electronic Drum
Kick Assembly
1
Place the snare onto the
plate(1), tighten the screw.
2
Set up plate(2) and tighten the
screw.
1
1
2
3
Set up plate(4) on the plate (3),
tighten the screw with your
screw-driver.
7
Screw
Electronic Drum
3
4
Table of contents
Other Ringway Drum manuals
