RIEJU MRT 125 LC User manual

OWNER’S MANUAL
MRT 125 LC
EURO 5

MRT 125 LC

MRT 125 LC 3
RIEJU S.A. would like to thank you for your trust in our company and congratulate you on an excellent choice.
The MRT 125 LC Euro 5 model is the result of RIEJU, extensive experience in developing high-performance
vehicles.
The purpose of this Owner’s Manual is to set forth how to use and maintain your vehicle. We ask that you carefully
read the instructions and the information provided as follows.
Please remember that the vehicle’s lifespan depends on how you use and maintain it. Keeping it in perfect ope-
rating condition reduces the cost of repairs.
Please consider this manual an integral part of the vehicle. It must remain with its basic equipment, even in the
event of a change in ownership.
For any issues, please see your RIEJU dealer, who will be delighted to serve you, or visit www.riejumoto.es
Remember that for your vehicle to operate properly, you must always request original replacements.

MRT 125 LC4
CONTENTS
Vehicle description ........................................
Vehicle registration ........................................
Vehicle delivery .............................................
Prior vehicle inspection ..................................
Technical data ...............................................
Location of serial numbers ............................
Main vehicle elements ..................................
Clutch lever ...................................................
Front brake lever ...........................................
Handlebar switches .......................................
Blinker switch ...........................................
Horn button ..............................................
Light switch ..............................................
Start-up button .........................................
Lock ...............................................................
Odometer .....................................................
Signals .....................................................
Adjustment button ....................................
Km/mile selection ................................
Using TRIP (partial route) ...................
Total time ............................................
Partial times ........................................
Selection button .......................................
Using the stopwatch .............................
Speed log ............................................
Settings ....................................................
Wheel diameter and number of pulses
Front suspension ...........................................
Rear suspension ...........................................
Rear brake pedal ...........................................
Gearshift pedal ..............................................
Kickstand .......................................................
Fuel tank ........................................................
Tyres .............................................................
Battery ...........................................................
Driving ...........................................................
Starting up the engine ..............................
Acceleration .............................................
6
7
8
9
12
14
16
18
18
19
19
20
20
21
22
23
24
26
26
26
27
27
28
28
28
30
30
32
32
33
33
34
35
36
37
38
39
41

MRT 125 LC 5
Braking .....................................................
Stopping ...................................................
Driving ......................................................
Maintenance ..................................................
Front headlight bulb ..................................
Position lamp bulb ....................................
Rear light ..................................................
Plate light .................................................
Brakes ......................................................
Front brake - adjusting lever distance ......
Rear brake - adjusting pedal distance ......
Front brake fuid level ................................
Rear brake fuid level .................................
Clutch - Adjustment ..................................
Fuel line - Adjustment ...............................
Brake pads ...............................................
Cooling system .........................................
Spark plug ................................................
Crankcase oil - checking and filling ..........
Air filter .....................................................
Steering set ..............................................
General lubrication ...................................
Maintenance table ....................................
Cleaning and long-term storage ....................
Cleaning ...................................................
Long-term storage ....................................
Warranty ........................................................
41
41
42
43
44
46
46
47
48
49
49
50
51
52
53
54
55
56
57
59
61
62
63
65
65
66
67

MRT 125 LC6
VEHICLE DESCRIPTION
This motorcycle has a four-stroke single-cylinder engine with water cooling. Its cubic capacity is 125 cubic cen-
timetres, with a 58-mm diameter piston with 47 mm movement.
It is turned on with an electric wheel and 140 W AC spool.
Steel and friction multi-plate clutch with constant pressure springs, immersed in oil bath.
The engine is anchored to a highly resistant perimeter chassis, with cone roller bearings.
The front suspension is a hydraulic fork with 37-mm diameter bars. Rear suspension is a hydraulic mechanical
shock absorber that provides gentle operation.
The front and rear brakes are stainless steel disc brakes. The front measures 260 mm and the rear 200 mm.

MRT 125 LC 7
VEHICLE REGISTRATION
Please make a note of the chassis and engine serial numbers, which will help you for all purposes (certificate of
characteristics, insurance, registration, etc.).
These numbers will be useful for you for any suggestions or complaints, as well as to order replacement parts.
Chassis serial number (p.12)
Engine serial number (p.12) Dealer seal

MRT 125 LC8
VEHICLE DELIVERY (complete upon first delivery)
USER MANUAL
Explain the importance of reading it and understanding all the information. Highlight the sections on safety
and maintenance practises.
WARRANTY REGISTRATION CARD
Complete the necessary information and provide the customer with a copy.
HANDLING
Explain how to properly handle the vehicle.
WARNINGS
Explain the importance of the warnings to guarantee a long “life” for the vehicle.
KEYS
Deliver the complete set. Advise them to make a backup set.
FIRST INSPECTION
Explain that an inspection after 1,000 km is important.
PERIODICAL MAINTENANCE
Explain the need for periodical maintenance and state that failure to comply with guidelines for check-up
and visiting the shop is grounds for “Loss of Vehicle Warranty”.

MRT 125 LC 9
INSPECTION PRIOR TO DELIVERY (Adjustments)
General appearance .....................................................................................................................
Engine
- Engine oil level ............................................................................................................................
- Emptying the carburettor float chamber .....................................................................................
Chassis
- No fuel leaks in: Tank output, fuel tap, and supply lines .......................................................................
- Front and rear brake - Drain, if necessary .............................................................................................
- Coolant level, if applicable .....................................................................................................................
- Front, rear mudguard and attachment elements ....................................................................................
- Wiring of electrical installation around the steering column ...................................................................
- Alignment of front, rear wheels, and tightening torque of wheel axles ...................................................
- Spokes of front and rear wheels .............................................................................................................
- Tyre pressure ..........................................................................................................................................
- Chain tension
................................................................................................................................
Checking the equipment
- Accelerator works and has free play. Adjust if necessary ..........................................................
- Degrease both brake discs .........................................................................................................
- Battery charged and terminals greased .....................................................................................
- Block steering or anti-theft block ................................................................................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................

MRT 125 LC10
- Electric start-up and kick starter (depending on model) engine operation ................................
- General condition of front and rear suspension ..........................................................................
- Clutch cable properly adjusted ...................................................................................................
- Operation of fuel cap closure ......................................................................................................
- General inspection of nuts and screws: Callipers/discs, transmission/pinions, wheel nuts, tilt,
engine mounts, exhaust system, shock absorber, gear selector, brake pedal/levers, manifold
nuts, etc. ........................................................................................................................................
Fuel tank
- Check that the tank is not in contact with the frame ...................................................................
Driving components
- The digital instrument dashboard checks itself when the ignition is turned on (depending on
the model) .....................................................................................................................................
- Adjusting the headlight height ....................................................................................................
- Brake light when pressing brake levers LH and RH ...................................................................
- Front, rear blinkers and mounting clips ......................................................................................
- Horn operation ............................................................................................................................
ON-ROAD TEST, at least 10 km
- Engine and gearbox operation ...................................................................................................
- Grip on road and suspensions ....................................................................................................
- Braking and ABS operation (if installed) .....................................................................................
- No abnormal sounds ...................................................................................................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
Table of contents
Other RIEJU Motorcycle manuals

RIEJU
RIEJU Marathon 125 PRO User manual

RIEJU
RIEJU MRT 50 EURO 4 User manual

RIEJU
RIEJU MRT 125 AC EURO 4 User manual

RIEJU
RIEJU MRX User manual

RIEJU
RIEJU MRT 50 User manual

RIEJU
RIEJU NUUK URBAN User manual

RIEJU
RIEJU KOSO User manual

RIEJU
RIEJU MRT 50 Instruction manual

RIEJU
RIEJU CENTURY 125IE User manual

RIEJU
RIEJU MRX-SMX 50 Instruction manual

RIEJU
RIEJU Marathon 450 User manual

RIEJU
RIEJU MR 300 User manual

RIEJU
RIEJU TANGO 125 User manual

RIEJU
RIEJU tango 50 User manual

RIEJU
RIEJU TANGO 250 Instruction manual

RIEJU
RIEJU RS3 50 User manual

RIEJU
RIEJU RS3 Naked 50 User manual

RIEJU
RIEJU TANGO 250 User manual

RIEJU
RIEJU MARATHON 250 User manual

RIEJU
RIEJU TANGO 125 User manual





















