RHOM 116E98-C User manual
Guangzhou Hongli Hardware Products Co. Ltd
Factory address: Hongmian Road, Caotang Village, Nancun Town,
Panyu District, Guangzhou City, Guangdong Province,China
Tel:+8620-38984800 Fax:+8620-38984800
Skype:godzhong@hotmail.com
Email:godzhong@hotmail.com
116E98-C Door Lock Instruction Manual
Content
A). Product Features..............................................................2
B). Technology Specification............................................. 2
C). Operation........................................................................... 2-6
D). Installation Drawing of 116E98-C...................................... 7
E). Drilling-bore Drawing..................................................... 8
F). FAQ..........................................................................................9
A). Product Features
Main board adopts Philips CPU microcomputer chip-level design
Optional unlocking ways (fingerprint, password, keys)
B). Technology Specification
Capacity of Passwords
100 Groups
Capacity of admin passwords
1 Groups
Capacity of fingerprint
100pcs
Apply to
Mifare card
Power Supply
DC4.5V～6.5V，4pcs of 1.5 No. 5 AA alkaline batteries
Static Current
< 60uA
Dynamic Current
< 350uA
Low power warning
It will be warning and lighting notice when power voltage is below 4.8V.
Executive body
DC micro motor
Service life
Be used for more than 300,000 times
C). Operation
Note: Before using, you should firstly waken up the panel by touching it by your palm (please
see picture). The correct way to waken up the panel is to try as many fingers as possible to
touch the screen. After wakening up the panel, you can login the password or read the
fingerprint to open the lock.
The original unlocking password is “123456”+”#”
The original management password is “0000” or “000000” (management password can’t be used
toopen the lock)
1. Change the management password.
* (for 2s) + 7 + management passwords + # + new management passwords + #.
Settings finish.
Remarks: New management password will replace the old one.
1 2
2. To add new passwords and fingerprints
To add new user passwords:
* (for 2s) + 8 + management passwords + # + first new passwords + # ......
Remarks: It can add 100 groups of user passwords
2
3. To delete passwords and fingerprints
* (for 2s)+9+management passwords +#
1+#, delete users one by one
2+#, delete all passwords
+
3+#,delete all cards
4+#,delete all fingerprint
0+#,delet all users
press user password
press user fingerprint delete successfully
press user card
delete successfully
To add fingerprints:
“*” (for 2s) + “8”+ management password + “#” + first new fingerprint (for 2 times) +
second new fingerprint (for 2 times) + third new fingerprint (for 2 times) + ......
(It can continuously add 100 pieces of fingerprints)+ “#” to exit. Setting finished. Original
passwords can not work after fingerprint added.
Note: it will quit automatically after 6s.
Note: it will quit automatically after 6s.
3
4
4. Setting for Modes
Mode (1): To unlock by password or fingerprint - under this mode, you can open the lock
either by password or fingerprint
“*” (for 2s) + “0”+ management password + “#” (see picture 3) + “1” + “#”
Mode (2): To unlock by password + fingerprint - under this mode, you can open the lock only when
you login the password and read the fingerprint.
“*” (for 2s) + “0”+ management password + “#” (see picture 3) + “2” + “#”
Note: the original mode is Mode 1.
5. To clean all data and return to the original setting
“*” (for 2s) + “0”+ management password + “#”(see picture 3) + “0” + “#”
6. Others:
When input incorrect passwords, the touchscreen will be activated again.
When input incorrect passwords continuously for 3 times, the lock will alarm for several times.
When input incorrect passwords continuously for 6 times, the lock will alarm for several times
and lockup for one minute.
B. To clean all data and return to to original setting: open the battery cover, press the snap (ADEL)
for 3s , the red light will be turned on, then it will begin a long ring and the system will return all
data back to the original factory setting -- internal storage passwords will be cleaned up; And the
management password will be renewed to “0000”, user passwords return to “123456”, any user
fingerprints can unlock, with normally open; The work mode is mode 1. Add new user fingerprints
and user passwords according to previous instructions.
5 6
D). Installation Drawing of 116E98
E). Drilling-bore Drawing
No.
Description
Qty
1
Front Plate
1
2
Back Plate
1
3
Based Plate
1
4
Lock Body
1
9
5
Square Stick
1
8
6
Strike Plate
1
2
10
7
Strike Plate Case
1
8
Batteries Box
1
11
9
M4x12 Screw
1
3
10
M5x12 Screw
3
11
M5x35 Screw
2
12
M4x12 Screw
4
1
5
4
12
6
7
Mortise hole
central line
7 8
F). FAQ
Problem
Reason
Proposed
Solution
9 10
Other RHOM Door Lock manuals
