Rexing MTC1 User manual

Table of contents

Popular Dashcam manuals by other brands

Cansonic

Cansonic UltraDuo Z2 instruction manual

Gazer

Gazer F720 user manual

HP

HP f500g user manual

Xblitz

Xblitz TANGO 4K user manual

Maka Technologies

Maka Technologies Marbella MXPro user manual

NESA

NESA NRC-80DLM User manual & installation guide

Kaiser Baas

Kaiser Baas R20 user guide

Boyo

Boyo VTM43TC manual

Minolta

Minolta MNCD37 user manual

Thinkware

Thinkware FA10 user manual

Momento

Momento MD-5200 user manual

BlackVue

BlackVue DR590X-1CH manual

HP

HP F300 quick start guide

CammSys

CammSys BlackSys BH-300 manual

Snooper

Snooper DVR-2HD user manual

Lukas

Lukas Q900 user guide

RVS

RVS 450C Product manual installation & instructions

BlackVue

BlackVue 750G PRO Checking and Adjusting

User Manual

MTC1

Motorcycle

Dash Cam

The information in this manual is subject to change without notice.

Rexing All Rights Reserved

www.rexingusa.com

We hope you love your new products as much as we do. If you need assistance, or

have any suggestions to improve it, please contact us.

Our support team will respond you as soon as possible.

Always a surprise in Rexing.

•https://www.facebook.com/rexingusa/

•https://www.instagram.com/rexingdashcam/

•https://www.rexingusa.com/support/registration/

Overview

Thank you for choosing REXING!

Check us out here.

Facebook Instagram Site Product Support

[email protected]

(877) 740-8004

1

What’s in the box?

1

5

2

3

7 8

4

6

2

1. Monitor

2. Front camera

3. Rear Camera

4. Hardwire Kit Cable

5. GPS Logger

6. USB Cable

7. Monitor Stand Installation Kit

8. Remote Control

9. Zip Ties X 5

10. Adhesives

11. Screws X 4

12. User Manual

13. Safety Guide

10 11 12 13

User Manual

MTC1

Motorcycle

Dash Cam

Theinformation in this manual is subject to change without notice.

RexingAll Rights Reserved

www.rexingusa.com

3

9

Safety Guide

安全ガイド

www.rexingusa.com

4

Installation

Various Motorcycles models require different installation instructions. For you and

your bikes own safety, please consider consulting a local professional for installation.

Warning

This is for reference only, please adjust installation method based on

your own motorcycle model.

If you would like to purchase other accessories (Camera Extending

Cable, Extra parts), please feel free to contact us.

After you confirm the correct quantity and code of terminals, please

make sure your cables and terminals are connected completely.

Moreover, if a terminal is broken, it will have a poor connection,

therefore it will not work properly.

!

5

Rear camera Remote Monitor GPS Logger

Front camera

000

08:55

KM/H

6

1. Front and Rear Cameras Installation

Use a screw driver to loose/fix

screw. After the screw is

released, you can adjust the lens

angle to up to 270 degrees.

1Remove the 3M adhesive

to stick the camera to the

right place.

Dash cam lens’s terminal

connection port.

Dash cam lens connection

ring. When you verify the

display on your screen, turn

the cylinder-shaped lens

body 360 degree.

3

42

Note:

Please repeat the same installation steps for both front and rear camera.

7

Warning

Different motorcycles can have different

positioning point for your lenses. In some

cases, you can stick your lenses upside

down. If this is the case, you need to

adjust the recording angle.

1. Unscrew the lens support fix.

2. Turn the cylinder-shaped lens body 360 degree.

3. You can adjust lens vertical angle up to 270 degrees.

• Lenses are Water Proof (IP67)

• If cleaning is necessary, please use a gentle cloth to clean lenses

• Please clean any water, oil stain, or dust before sticking your 3M

Adhesive Pad. If you relocate your lenses repeatedly, the 3M Glue

ability to stick will weaken, and your lens may fall.

• When you accelerate, the image quality may not be very stable,

this is the character of CMOS sensors. Please be aware, this is

not part of agreement.

!

8

2. Monitor Installation

Place your motorcycle’s handle in the middle of the ring, then use a screw driver

to tide the ring

Screw the dash cam monitor into the socket

Socket

3. Install a Micro SD Card

9

Make sure your

camera’s power is off,

and make sure you

insert card correctly,

push the card into the

card slot until you

hear a click.

Make sure your camera’s power is

off, push the card in the card slot

until you hear a click, then you are

safe to remove your micro SD card.

• Please use 8GB to 128GB micro SD card.

• Please use “Class 10 UHS-1” or higher standard card and higher speed card. If you

use class 10 or lower standard cards, the camera may not able to film.

• Please format your micro SD card before use.

Note:

1. Format will delete all contents in your SD card, please backup your files before

formatting.

2. Do not release your finger before removing the memory card.

3. Format regularly. We recommend once a month.

4. If you are removing or inserting micro SD card while power on, it may damage

your data or your camera.

Micro SD card installation

Micro SD card removal

000

08:55

KM/H

000

08:55

KM/H