Renesas RX65N Series User manual

Quick Start Guide Renesas RX65N Cloud Kit

Note: The steps described in this document were correct at the time of this document was created and may have

changed at the time of reading.

This documentdescribes how to install and run the AWS cloud connectivity demo on Renesas RX65N Cloud Kit and

visualize the sensor data onthe webdashboard.

What you need to get started:

1. Prepare Renesas RX65N Cloud Kit (www.renesas.com/rx65n-cloud)

2. Register AWS account (https://aws.amazon.com)

3. Register Renesas web dashboard account (https://cloud.renesasrx.com/accounts/register#)

4. Write the sample program if your board is re-flashed from the default

(https://www.renesas.com/search/keyword-search.html#q=R01QS0035EU)

5. Prepare Wi-Fi Internet access environment

1. Register AWS Account

1. Create an AWS account by going to portal: https://portal.aws.amazon.com/billing/signup#/start

2. After login, go to your account name in upper right-handcornerand click on “My Security Credentials”.

3. If the below window pops up, click on “Continue to Security Credentials”.

R12QS0036EJ0101

4. Click on “Access keys (access key ID and secret access key)”.

5. Click on “Create New AccessKey” and ‘Download KeyFile”. Make anote ofthe “Access Key ID’ and “Secret

Access Key”. This information will be required in Step 7.

2. Register Web Dashboard Account and Create an IoT Thing

6. Create a web dashboard account at https://cloud.renesasrx.com

7. After login, go to “Setting”and enter the cloud provider configuration byentering the “AWS Access Key”and “AWS

Secret Key” noted in the Step 5. Make sure to select “AWS IoTCore Region” same as AWS account. Click “Save”.

This will provision the dashboard for the AWS access.

8. Click on “Register a newdevice” and Enter any name under “Device Name” and then click “Create”.

9. A new window will pop up with the device name and security credentials. Make anote ofall the dataor savethe

webpage for later reference. Don’t close this windowuntil kit is provisioned for the credentials as this information is

available only once.

3. Provision the Kit for the AWS Credentials

10. Connectthe cloud kitas below. Make sure Silex Pmod module is connected to Cloud Option Board PMOD

connector CN5.

11. Connect USB cable from CN18 to the PC.

12. Open Terminal program like “Tera Term” and configure it forserialconnectionas 115k baud rate, 8-bit data, no

parity.Make sure to assignthe COMport assigned to the kit.

13. Ensure linkis fitted to EJ2on the Target Board for RX65N for non-debugger operation.

14. Power up the kitby connecting USB cables to TBboard connectorECN1 and Cloudoption board CN6 toPC.

15. If the board ispre-programmed with the demo code and has no Wi-Fi and AWS credential pre-stored, the following

message will appear ontheTerminal window. Skip the steps 16 and 17 and follow the steps thereafter.

16. If the board isprovisioned already with the Wi-Fi and AWS credential, the below message willbe shown on the

terminal.

Cloud Option Board

Silex Pmod Module

Target Board for RX65N

17. If unsure about provisioning data, clickany key to program thenewprovisioning data. Otherwise, if the kit is

provisioned with the correctdata,then wait for the kitto connect to AWS and skip the steps18 to23.

18. Enter Wi-Fi SSID and click enter.

19. Enter Wi-Fi password for the Wi-Fi network chosen in the previous step.

20. Input the device name created in the dashboard in the Step 8 and press enter.

21. Copy and paste the endpoint address from credential window of the dashboard and press enter.

22. Copy and paste the certificate from credential window from the dashboard and press enter.

23. Copy and paste the private key from the dashboard and press enter.

24. Verify the setting. If correct, enter “0” to write the provisioning data in Flash.

25. Wait about 1 minute without inputting anything from the keyboard. If you enter something from the keyboard

here, the SSIDand password entered 1) to 6) will be cleared and you will need to enter it again. After a reset or

when the power is turned on again, it will tryto connectto the cloud with the SSIDand passwordentered

previously. If you change the SSID or password, you can reset itby pressing any key at the step of “Please

press any button to reprovision”. If communication doesnot start in about 1 minute, press RESET_SW and wait

again or check the input information again.

26. If provisioning information is correct then the kit will be connected to AWS now, and will be ready to post the

sensor data on AWS cloud and dashboard.

4. Visualize Sensor Data on the dashboard

27. Go back to Dashboard and close the credential window.

28. Click on “Device”. Click “View” button to see the sensordashboard.

29. The dashboard will openand show the sensor’s value. The sensorvalue will beupdated every 30

seconds.

5. Monitor Sensor data on AWS Console

30. Go back to AWS account. Click on “Services->IoT Core->Manage->Things”.

31. Click on the Things name (Referred as device name) created in the dashboard (step 8).

32. Click on Shadowto monitor sensor data.

6. Next Step

After you have completed quick start procedure, review hardware detail of the kit. The hardware detail can be found

in the user’s manual of the Target Board for RX65N and Cloud Option Board user’s manual.

7. User Manuals

The user manuals for this kit is available at: www.renesas.com/rx65n-cloud

RX65N Group User's Manuals (R01UH0590EJ0210) is available at: https://www.renesas.com/RX65N

8. Support

Online technical support and information is available at: https://en-support.renesas.com/dashboard

Technical Contact Details: https://www.renesas.com/us/en/support/contact.html

Website: https://www.renesas.com/

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Renesas Electronics:

RTK5RX65N0S00000BE RTK5RX65N0S01000BE

Other manuals for RX65N Series

Table of contents

Other Renesas Microcontroller manuals

Renesas

Renesas RL78/G1F User manual

Renesas

Renesas DA14706 PRO User manual

Renesas

Renesas E100 User manual

Renesas

Renesas RA6 Series User manual

Renesas

Renesas DK-S124 User manual

Renesas

Renesas V850ES/Fx3 Series User manual

Renesas

Renesas FG4-768K Series User manual

Renesas

Renesas 78K0/F 2 Series User manual

Renesas

Renesas RL78/G23 User manual

Renesas

Renesas RA2E2 Group User manual

Renesas

Renesas V850ES/IE2 User manual

Renesas

Renesas RL78/G1A User manual

Renesas

Renesas RX600 Series User manual

Renesas

Renesas RX63N User manual

Renesas

Renesas RX200 Series User manual

Renesas

Renesas HD6473937RXV User manual

Renesas

Renesas RL78/G1H User manual

Renesas

Renesas RL78 Series User manual

Renesas

Renesas RL78G14 Installation and operating instructions

Renesas

Renesas DA14706 PRO User manual

Renesas

Renesas RL78/G15 User manual

Renesas

Renesas 78K0R/KE3 User manual

Renesas

Renesas RSKRL78G14 Quick start guide

Renesas

Renesas YROTATE-IT-RX23T User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide