REITEL ERGORET CC User manual

Operating Instructions

LABORATORY EQUIPMENT IN

STAINLESS STEEL

ERGORET CC

REITEL Feinwerktechnik GmbH

Senfdamm 20 | 49152 Bad Essen

Phone: +49(0)5472-9432-0 | Fax: +49(0)5472-9432-40

www.reitel.com | [email protected]

Dear Customer!

Der ERGORET CC ergonomic workstation, along with the Vario lifting table, reduces lengthy

procedures by offering best conditions to minimise strain and tiredness. Potentially

detrimental waste, dust, gases and fumes which arise from grinding, glueing devesting,

trimming and other operations can be safely extracted (photo shows white unit with Vario

lifting table). The ergonomically designed worktop made of quality wood, two drawers for

accommodating tools and material as well as a handpiece adapter, several sockets and the

front control panel complete the workstation.

Any other use or usage beyond this scope is considered unintended use. The manufacturer

shall not be responsible for any damages that may result thereby.

Prior to installation of the device operating instructions and especially the safety instructions

must be read and followed by all personnel who use this device.

After having unpacked the device, please check carefully whether transportation damages of

any kind have occurred. If that is the case, the carrier or manufacturer must be notified within

3 days. The company will not be responsible for any damages found after that.

These operating instructions must be read and followed by all personnel who use this device.

Store it at a safe place near the device. This documentation is protected by copyright.

Transmittal or reproduction of this document in whole or in part and disclosure of its contents

is not permitted. If the operation manual gets lost an extra copy can be ordered from the

manufacturer.

III

INDEX

TECHNICAL DESCRIPTION......................................................................................... 4

BASIC EQUIPMENT....................................................................................................... 4

SPECIAL ACCESSORIES................................................................................................ 5

DEVICE COMPONENTS.................................................................................................. 6

TECHNICAL DATA......................................................................................................... 8

SAFETY NOTES........................................................................................................... 9

GENERAL SAFETY NOTES ............................................................................................ 9

SPECIFIC SAFETY NOTES............................................................................................10

INSTALLATION ...........................................................................................................11

INSTALLATION.............................................................................................................11

INSTALLATION OF TOOLS/EQUIPMENT...........................................................................11

OPERATION................................................................................................................12

OPERATING SEQUENCE ..............................................................................................12

VARIO-LIFTING TABLE (OPTION)...................................................................................12

HOW TO CHANGE FILTERS OF THE INTEGRATED SUCTION...............................................13

LAMP REPLACEMENT...................................................................................................13

TROUBLESHOOTING .................................................................................................14

MAINTENANCE...........................................................................................................14

WARRANTY.................................................................................................................15

RULES FOR DISPOSAL..............................................................................................18

SPARE PARTS LIST ...................................................................................................18

EC CONFORMITY DECLARATION.............................................................................19

Technical Description

Basic Equipment

•ERGORET CC benchtop unit, magnifying glass, 4 diopters, internal suction for gases and

fumes

•ERGORET CC with Vario-lifting table, magnifying glass, 4 diopters, internal suction for

gases and fumes

Special Accessories

•Order-No.: 24800000 Vario-lifting table

•Order-No.: 23206000 Dust protection lamellae

Device components

1 Magnifier with holder

2 Lamp

3 Glass cover

4 Suction socket

5 Socket for Vario-lifting table

6 Lever for blast nozzle (ball valve with black lever)

7 Socket with flap

8 Socket with flap

9 Filter cover

10 Integrated suction, 3 step variable (for gases and fumes)

11 Opening for tools and equipment

12 Main power switch

13 Lamp switch

14 Internal suction switch

15 Assignable switch (e.g. for external suction)

16 Stainless steel tray

17 Gas spring for opening the glass cover

18 Power cable

19 Remote control for Vario-lifting table (option)

20 Foot switch

21 External suction (for dust, cuttings etc.)

22 Suction hose

23 Suction port

24 Compressed air connector

25 Vario-lifting table (option)

26 Tray

27 Sinter filter

28 Tabletop

29 Hand vice

30 Air blast nozzle

Device views

Technical Data

Line voltage

230 V/50–60 Hz

Current consumption

120 W

Height/width/depth

670/910/860 mm (upper part)

Variable working height

880-1180 mm with Vario-lifting table

Weight

60 kg (benchtop)+30 kg (Vario-lifting table)

Magnifiying glass

4 diopters

Compressed air

max. 8 bar

Sound level

≤70 dB(A)

Housing

Stainless steel, wood, wood composite

Order-No.:

14803000 benchtop without Vario-lifting table

14804000 with Vario lifting table

Made in Germany (Subject to modifications)

Safety Notes

General Safety Notes

•All equipment undergoes final inspection and testing before leaving our factory. However,

if equipment is damaged during shipping or through any other circumstances, it must not

be used in service. Please check the device regularly for damages. Damaged parts

should be replaced immediately.

•All power/air/water/gas sources should be rated for the demands of the device as listed in

the technical data sheets. Maximum ratings must not be exceeded. All VDE (Verein

Deutscher Elektro-Ingenieure) standards should be followed. Equipment should be

grounded according to standards.

•Adherence to valid regulations regarding necessary checks (e.g. according to Accident

Prevention & Insurance or electrical equipment) is exclusively taken over by the

buyer/user of this product.

•This device has been designated to be used only for its intended purpose. All other

applications must be prohibited for safety reasons as otherwise the manufacturer’s

warranty expires.

•The device should be set-up in a clean, well-ventilated room, if necessary under a hood.

•Supporting surfaces should be straight, flat and adequately stable.

•Don’t place anything on top of the machine.

•To avoid injury, appropriate protection should be worn (e.g. gloves, safety glasses, safety

shoes, hearing protection etc.)

•If the machine is defective or working improperly it must be taken out of service. In case

of further use of the machine the owner will be held responsible for any consequential

damage.

•To prevent accidents from water, fire or explosion, all power/air/water/gas sources should

be turned off after working hours and during breaks, and secured against unauthorized

access.

•When carrying out maintenance works or repairs or when opening the device always turn

off the main power switch and unplug the whole unit.

•Repairs should be carried out only by the manufacturer or by qualified and certified

personnel appointed according to chapter 7 –warranty.

•In case of leaking water out of housing or tank shut down device and call service.

•Check all hose connections for leak tightness, if necessary tighten hose clamps again.

Specific Safety Notes

Note:

•Disposal of debris from suction:

- If you should need to dispose of this product please observe local regulations

governing disposal.

- Replace the filter as soon as finest dust or vapor arise during operation (not for

flammable dust without MAK/TRK-value)

- Empty the filter and the tray as soon as grinding chips and dust arise.

•Using external suctions, please observe the manufacturer’s instructions.

Table of contents

Other REITEL Laboratory Equipment manuals

REITEL

REITEL VACURET DIGIT User manual

REITEL

REITEL SUPERSTEAM User manual

REITEL

REITEL POLIRET MINI User manual

REITEL

REITEL DUSTY MINI User manual

REITEL

REITEL ROTOGRIND MINI User manual

REITEL

REITEL ROTOGRIND NT User manual

REITEL

REITEL POLIRET MINI User manual

REITEL

REITEL POLIRET TWIN User manual

REITEL

REITEL STAR User manual

REITEL

REITEL ERGORET CC KFO User manual

REITEL

REITEL RETOCAST T User manual

REITEL

REITEL RETOMIX COMFORT User manual

REITEL

REITEL ROTOGRIND NT User manual

REITEL

REITEL RETOMIX MINI User manual

REITEL

REITEL SANDUBLAST User manual

REITEL

REITEL RETOCAST I User manual

REITEL

REITEL ERGORET MINI User manual

REITEL

REITEL RETOCAST T User manual

REITEL

REITEL SANDUBLAST 3 User manual

REITEL

REITEL BIOSTEAM CENTER User manual

REITEL

REITEL POLIRET User manual

REITEL

REITEL ERGORET CLASSIC User manual

REITEL

REITEL Polymat User manual

REITEL

REITEL RETOMAT Series User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide