Regency Sunrise P33S-NG4 Quick start guide

WARNING:

Iftheinformationintheseinstructionsarenotfollowedexactly,

a ﬁre or explosion may result causing property damage,

personal injury or loss of life.

FOR YOUR SAFETY

Do not store or use gasoline or other ﬂammable vapors and

liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualiﬁed

installer, service agency or the gas supplier.

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appliance

Do not touch any electrical switch:

do not use any phone in your

building.

Immediately call your gas supplier

from a neighbour's phone. Follow

the gas supplier's instructions.

If you cannot reach your gas

supplier, call the ﬁre department.

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

918-757a

Regency P33 Sunrise™

Gas Fireplace

01/11/11

Owners &

Installation Manual

www.regency-ﬁre.com

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

MODEL: P33S-NG4 Natural Gas

P33S-LP4 Propane

2Regency P33 Sunrise™ Gas Fireplace

To the New Owner:

Congratulations!

You are the owner of a state-of-the-art Gas Fireplace by REGENCY®. The P33 Sunrise™

has been designed to provide you with all the warmth and charm of a ﬁre at the ﬂick of a

switch. The model P33 Sunrise™ has been approved by Warnock Hersey for both safety and

efﬁciency. As it also bears our own mark, it promises to provide you with economy, comfort

and security for many trouble free years to follow. Please take a moment now to acquaint

yourself with these instructions and the many features of your Regency®Fireplace.

Regency P33 Sunrise™ Gas Fireplace 3

MANUFACTURED MOBILE HOME REQUIREMENTS

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE

This Regency®product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards:

VENTED GAS FIREPLACE HEATERS ANSI Z21.88a-2007 / CSA 2.33a-2007 and GAS-FIRED APPLIANCES FOR USE AT HIGH

ALTITUDES CAN / CGA 2.17-M91.

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the

Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for

Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard

in Canada.

This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of

local codes follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the

U.S.A., and the current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.

This appliance comes equipped with a dedicated #8 Ground Lug for attachment of the ground wire to the steel chassis as applicable

to local codes.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with

the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

This appliance may only be installed in an aftermarket permanently located, manufactured (U.S.A only) or mobile home, where not

prohibited by local codes.

This appliance can only be used with the type of gas indicated on the rating plate. This appliance is not convertible for use with

other gases, unless a certiﬁed kit is used. (Kit # 434-970)

Ensure that structural members are not cut or weakened during installation.

4Regency P33 Sunrise™ Gas Fireplace

TABLE OF CONTENTS

SAFETY LABEL

Copy of Safety Decal.....................................................5

REQUIREMENTS

MA Code - CO Detector.................................................6

DIMENSIONS

Unit Dimensions ............................................................7

INSTALLATION

Important Message ......................................................8

Before You Start ............................................................8

General Safety Information............................................8

Installation Checklist......................................................9

Locating Your Gas Fireplace .........................................9

Clearances ..................................................................10

Mantel Clearances....................................................... 11

Mantel Leg Clearances................................................ 11

Framing & Finishing.....................................................12

Framing Dimensions....................................................13

Unit Assembly Prior to Installation...............................14

Venting Introduction.....................................................14

Exterior Vent Termination Requirements .....................15

Regency®Direct Vent ﬂex System ..............................16

Rigid Pipe Venting Systems ........................................17

4" X 6-5/8" RigiD Pipe Cross Reference Chart............18

Rigid Pipe Venting Arrangements ...............................20

Vertical Termination

with Co-Linear Flex System........................................21

Venting Arrangements - Vertical Terminations ............22

Unit installation with Horizontal termination.................27

Unit installation with Vertical Termination ....................28

Gas Line Installation....................................................28

Pilot Adjustment...........................................................29

High Elevation .............................................................29

S.I.T. Valve Description................................................29

Gas Pipe Pressure Testing..........................................29

Conversion from NG to LP ..........................................30

DC Spark Box Battery Replacement ...........................32

DC Spark Box Replacement........................................32

Optional Wall Thermostat ...........................................33

Optional Remote Control.............................................33

GT remote features .....................................................33

Wall Switch ..................................................................33

Aeration Adjustment ....................................................34

Wiring Diagram ...........................................................34

GT remote wiring Diagram ..........................................35

Installing the Optional Fan...........................................36

Optional Reﬂective Panel Installation..........................37

Glass Crystal ...............................................................38

Installation On Burner..................................................38

Optional pebble Installation On ﬁrebox base...............38

Standard Flush Door Installation .................................39

Faceplate Installation...................................................40

OPERATING INSTRUCTIONS

Operating Instructions .................................................42

First Fire ......................................................................42

Lighting Procedure ......................................................42

Shutdown Procedure...................................................42

Normal Operating Sounds of Gas Appliances.............42

Copy of Lighting Plate Instructions..............................43

MAINTENANCE

Maintenance Instructions.............................................44

General Vent

Maintenance................................................................44

Thermopile / Thermocouple.........................................44

Glass Door...................................................................44

Glass Replacement .............................................44

Valve Tray Replacement..............................................45

Removing Valve...................................................45

Installing Valve.....................................................45

PARTS LIST

Main Assembly ............................................................46

WARRANTY

The Warranty: Limited Lifetime ...................................47

Regency P33 Sunrise™ Gas Fireplace 5

SAFETY LABEL

This is a copy of the label that accompanies

each P33 Sunrise™ Direct Vent Gas Fireplace.

We have printed a copy of the contents here for

your review.

NOTE: Regency®units are constantly being

improved. Check the label on the unit and if

there is a difference, the label on the unit is the

correct one.

COPY OF SAFETY DECAL

For the State of Massachusetts, installation

and repair must be done by a plumber or

gas ﬁtter licensed in the Commonwealth of

Massachusetts.

For the State of Massachusetts, ﬂexible

connectors shall not exceed 36 inches in

length.

For the State of Massachusetts, the appli-

ances individual manual shut-off must be a

t-handle type valve.

The State of Massachusetts requires the

installation of a carbon monoxide alarm in

accordance with NFPA 720 and a CO alarm

with battery back up in the same room where

the gas appliance is installed.

DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE

343

Minimum supply pressure

Manifold pressure high

Manifold pressure low

Orifice size

Minimum input

Maximum input

Altitude

NATURAL GAS: Model P33S-NG4

PROPANE: Model P33S-LP4

Minimum supply pressure

Manifold pressure high

Manifold pressure low

Orifice size

Minimum input

Maximum input

Altitude

DOOR SEAL: Please check that

the door is properly sealed

FPI Fireplace Products International Ltd.

Delta, BC, Canada

Minimum Clearances to Combustibles

Degagement Minimum De Materiaux Combustibles

0" Clearance to

combustibles from:

Ceiling Clearances from

Top of Unit:

Side Wall Clearance from

Side of Unit:

Top, sides, bottom and rear of unit

(A) 30" (762mm)

B) 7.5"(190mm)

Floor Clearance:

C) 1”(25mm)

D) Max. Depth 36" (914mm)

E Min. Width 48" (1219mm)

Alcove Clearances

)

(See Instruction Manual for Detailed Instructions)

Serial No./ No de serie

918-761a

5" WC (1.25 kPa)

3.5" WC (0.87 kPa)

1.6" WC (0.39 kPa)

# 47 DMS

0-4500 ft/pi (0-1372 m)

12,000 Btu/h (3.51 kW)

17,000 Btu/h (4.98 kW)

APPAREIL FONCTIONNANT AU NATURAL GAS

CONCU POUR ETRE POELE:

Pression d'allimentation minimum

Pression a la tubulure d' chappement lev e

Pression a la tubulure d' chappement basse

Grandeur de l'injecteur

D bit Califorique minimum selon

D bit Caliorfique maximum selon

l'altitude

Modéle P33S-NG4

ééé

APPAREIL FONCTIONNANT AU PROPANE

CONCU POUR ETRE POELE:

Pression d'allimentation minimum

Pression a la tubulure d' chappement lev e

Pression a la tubulure d' chappement basse

Grandeur de l'injecteur

D bit Califorique minimum selon

D bit Caliorfique maximum selon

l'altitude

Modéle P33S-LP4

ééé

VENTING: Use listed Direct Vent Pro and others as listed in the manual or Regency Direct Vent System. Only for direct discharge without duct connection. This appliance

must be installed in accordance with the manufacturer's installation instructions and with local codes, if any; if not, follow the current ANSI Z223.1inthe

USA or the current CAN 1-B149 in Canada. For Manufactured Home Installation: This Direct Vent System Appliance must be installed in accordance with

the manufacturer's installation instructions and Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280, or the current Standard

for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240 MH Mobile Home

Standard in Canada Certified for use with Heat Wave (Kit # 946-556).

Fan (Part # 432-917) This vented gas fireplace heater is not for use with air filters.

MAY BE INSTALLED IN MANUFACTURED (MOBILE) HOMES AFTER FIRST SALE.

Listed:

Certified for/Certifi e pour:

Tested to:

WN# 16375

VENTED GAS FIREPLACE HEATER

CANADA and U.S.A.é

CAN/CGA-2.17-M91,

ANSI Z21.88a-2007/CSA 2.33a-2007.

Model/Modele:

P33S-NG4

Model/Modele:

P33S-LP4

Electrical supply 115VAC, 1.13 A, 60Hz.

Not for use with solid fuel.

Made in Canada/

Fabrique au Canada

Duplicate S/N

Ceiling

Wall

11" WC (2.73 kPa)

10" WC (2.49 kPa)

6.4" WC (1.59 kPa)

# 56 DMS

0-4500 ft/pi (0-1372 m)

12,000 Btu/h (3.51 kW)

15,500 Btu/h (4.54 kW)

6Regency P33 Sunrise™ Gas Fireplace

REQUIREMENTS

5.08: Modifications to NFPA-54, Chapter 10

(2) Revise 10.8.3 by adding the following additional requirements:

(a) For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for

residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than

seven (7) feet above finished grade in the area of the venting, including but not limited to decks and porches, the following requirements shall

be satisfied:

1. INSTALLATION OF CARBON MONOXIDE DETECTORS. At the time of installation of the side wall horizontal vented gas fueled

equipment, the installing plumber or gasfitter shall observe that a hard wired carbon monoxide detector with an alarm and battery back-up is

installed on the floor level where the gas equipment is to be installed. In addition, the installing plumber or gasfitter shall observe that a battery

operated or hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure

served by the side wall horizontal vented gas fueled equipment. It shall be the responsibility of the property owner to secure the services of

qualified licensed professionals for the installation of hard wired carbon monoxide detectors

a. In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon

monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level.

b. In the event that the requirements of this subdivision can not be met at the time of completion of installation, the owner shall have a period of

thirty (30) days to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon

monoxide detector with an alarm shall be installed.

2. APPROVED CARBON MONOXIDE DETECTORS. Each carbon monoxide detector as required in accordance with the above provisions

shall comply with NFPA 720 and be ANSI/UL 2034 listed and IAS certified.

3. SIGNAGE. A metal or plastic identification plate shall be permanently mounted to the exterior of the building at a minimum height of eight

(8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The

sign shall read, in print size no less than one-half (1/2) inch in size, "GAS VENT DIRECTLY BELOW. KEEP CLEAR OF ALL

OBSTRUCTIONS".

4. INSPECTION. The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation

unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR

5.08(2)(a)1 through 4.

(b) EXEMPTIONS: The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

1. The equipment listed in Chapter 10 entitled "Equipment Not Required To Be Vented" in the most current edition of NFPA 54 as adopted by

the Board; and

2. Product Approved side wall horizontally vented gas fueled equipment installed in a room or structure separate from the dwelling, building or

structure used in whole or in part for residential purposes.

Approved side wall horizontally vented gas equipment provides a venting system design or venting system components with the equipment, the

instructions provided by the manufacturer for installation of the equipment and the venting system shall include:

1. Detailed instructions for the installation of the venting system design or the venting system components; and

2. A complete parts list for the venting system design or venting system.

(d) MANUFACTURER REQUIREMENTS - GAS EQUIPMENT VENTING SYSTEM NOT PROVIDED. When the manufacturer of a

Product Approved side wall horizontally vented gas fueled equipment does not provide the parts for venting the flue gases, but identifies

"special venting systems", the following requirements shall be satisfied by the manufacturer:

1. The referenced "special venting system" instructions shall be included with the appliance or equipment installation instructions; and

2. The "special venting systems" shall be Product Approved by the Board, and the instructions for that system shall include a parts list and

detailed installation instructions.

(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipment, all venting instructions,

all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipment at the completion of

the installation.

MA Code - CO Detector

(for the State of Massachusetts only)

Regency P33 Sunrise™ Gas Fireplace 7

DIMENSIONS

UNIT DIMENSIONS

8Regency P33 Sunrise™ Gas Fireplace

INSTALLATION

7)Any safety glass removed for servicing must

be replaced prior to operating the appliance.

8) To prevent injury, do not allow anyone who

is unfamiliar with the operation to use the

ﬁreplace.

9) Weargloves andsafety glassesforprotection

while doing required maintenance.

10) Be aware of electrical wiring locations in

walls and ceilings when cutting holes for

termination.

11) Under no circumstances should this

appliance be modiﬁed. Parts that have to

be removed for servicing should be replaced

prior to operating this appliance.

12) Installation and any repairs to this appliance

should be done by an authorized service

person. A professional service person

should be called to inspect this appliance

annually. Make it a practice to have all of

your gas appliances checked annually.

13) Do not slam shut or strike the glass door.

14) Under no circumstances should any solid

fuels (wood, paper, cardboard, coal, etc.)

be used in this appliance.

15) The appliance area must be kept clear and

free of combustible materials, (gases and

other ﬂammable vapours and liquids).

Emissions from burning wood or gas could

contain chemicals known to the State of

California to cause cancer, birth defects or

other reproductive harm.

IMPORTANT MESSAGE

SAVE THESE

INSTRUCTIONS

The P33 Sunrise™ Fireplace must be installed

in accordance with these instructions. Carefully

read all the instructions in this manual ﬁrst.

Consult the "authority having jurisdiction" to

determine the need for a permit prior to starting

the installation. It is the responsibility of the

installer to ensure this ﬁreplace is installed in

compliance with manufacturers instructions and

all applicable codes.

BEFORE YOU START

Safe installation and operation of this appliance

requires common sense, however, we are

required by the Canadian Safety Standards

and ANSI Standards to make you aware of

the following:

GENERAL SAFETY

INFORMATION

1) The appliance installation must conform

with local codes or, in the absence of local

codes, with the current Canadian or National

Gas Codes, CAN1-B149 or ANSI Z223.1

Installation Codes.

2) The appliance when installed, must be elec-

trically grounded in accordance with local

codes, or in the absence of local codes with

the current National Electrical Code, ANSI/

NFPA 70 or CSA C22.1 Canadian Electrical

Code.

3) See general construction and assembly

instructions. The appliance and vent should

be enclosed.

4) This appliance must be connected to the

speciﬁed vent and termination cap to the

outside of the building envelope. Never vent

to another room or inside a building. Make

sure that the vent is ﬁtted as per Venting

instructions.

5) Inspect the venting system annually for

blockage and any signs of deterioration.

6) Venting terminals shall not be recessed into

a wall or siding.

CHILDREN AND ADULTS SHOULD

BE ALERTED TO THE HAZARDS OF

HIGH SURFACE TEMPERATURES,

ESPECIALLYTHE FIREPLACEGLASS,

AND SHOULD STAY AWAY TO AVOID

BURNS OR CLOTHING IGNITION.

INSTALLATION AND REPAIR SHOULD

BE DONE BY AN AUTHORIZED

SERVICE PERSON. THE APPLIANCE

SHOULD BE INSPECTED BEFORE

USE AND AT LEAST ANNUALLY BY A

PROFESSIONAL SERVICE PERSON.

MORE FREQUENT CLEANING MAY

BE REQUIRED DUE TO EXCESSIVE

LINT FROM CARPETING, BEDDING

MATERIAL, ETC. IT IS IMPERATIVE

THAT CONTROL COMPARTMENTS,

BURNERS AND CIRCULATING AIR

PASSAGEWAYS OFTHE APPLIANCE

BE KEPT CLEAN.

DUE TO HIGH TEMPERATURES, THE

APPLIANCE SHOULD BE LOCATED

OUT OF TRAFFIC AND AWAY FROM

FURNITURE AND DRAPERIES.

WARNING: FAILURETO INSTALLTHIS

APPLIANCE CORRECTLY WILL VOID

YOUR WARRANTY AND MAY CAUSE

A SERIOUS HOUSE FIRE.

CLOTHING OR OTHER FLAMMABLE

MATERIALSHOULDNOTBEPLACED

ON OR NEAR THE APPLIANCE.

YOUNG CHILDREN SHOULD BE

CAREFULLY SUPERVISED WHEN

THEY ARE IN THE SAME AREA

AS THE APPLIANCE. TODDLERS,

YOUNG CHILDREN AND OTHERS

MAY BE SUSCEPTIBLETO ACCIDEN-

TAL CONTACT BURNS. A PHYSICAL

BARRIERS IS RECOMMENDED IF

THERE ARE AT RISK INDIVIDUAL IN

THE HOUSE. TO RESTRICT ACCESS

TO A FIREPLACE OR STOVE,INSTALL

AN ADJUSTABLE SAFETY GATE TO

KEEPTODDLERS,YOUNG CHILDREN

AND OTHER AT RISK INDIVIDUALS

OUT OFTHE ROOM AND AWAY FROM

HOT SURFACES.

Regency P33 Sunrise™ Gas Fireplace 9

INSTALLATION

This includes:

1) Clocking the appliance to ensure the correct

ﬁring rate (rate noted on label), after burning

appliance for 15 minutes.

2) If required, adjusting the primary air to ensure

that the ﬂame does not carbon. First allow

the unit to burn for 15-20 min. to stabilize.

CAUTION: Any alteration to the product that

causes sooting or carboning that results

in damage is not the responsibility of the

manufacturer.

LOCATING YOUR

GAS FIREPLACE

A) Flat on Wall

B) Flat on Wall Corner

C) Recessed into Wall/Alcove

D) Corner

Diagram 1

1) When selecting a location for your ﬁreplace,

ensure that the clearances are met.

2) The appliance must be installed on a ﬂat,

solid, continuous surface For example a

wood, metal or concrete ﬂoor or in a raised (on

the wall) application. The appliance must be

installed on a metal or wood panel extending

the full width and depth of the appliance.

3) The P33 Sunrise™ Gas Fireplace can be

installed in a recessed position or framed

out into the room as in A, B, C and D. See

Diagram 1.

7) Test Gas Pressure (Refer to "Gas Pipe Pres-

sure Testing" section).

8) Install 1 AA battery in the DC Sparker

(see P 31.)

9) Install standard and optional features. Refer

to the following sections:

a) Optional Stainless Steel Reﬂective

Panels

b) Glass Crystals or Optional Ceramic

Stones

c) Optional Firebox Base Pebbles

d) Remote Control or Wall Thermostat

e) Optional Fan Assembly

f) Faceplate

10) Wall Mounted ON/OFF Switch:

Use the toggle wall switch supplied with the

manual package. Use of a “decor” switch

causes higher resistance which is a problem

on gas ﬁreplaces.

11) Final check.

Before leaving this unit with the customer, the

installer must ensure that the appliance is ﬁring

correctly and operation fully explained to

customer.

INSTALLATION

CHECKLIST

1) Locate appliance

a) Room location (Refer to "Locating Your

Gas ﬁreplace" section)

b) Clearances to Combustibles (Refer to

"Clearances" section)

c) Mantle Clearances (Refer to "Mantel

Clearances" section)

d) Framing & Finishing Requirements

(Refer to "Framing & Finishing" section)

e) Venting Requirements (Refer to "Venting"

section)

2) Assemble Top and Side Standoffs (Refer to

"Unit Assembly Prior to Installation).

3) Slide unit into place.

4) Install vent (Refer to "Venting Arrangement"

sections).

5) Make gas connections (Refer to "Gas Line

Installation section).

6) Test the pilot (Refer to "Pilot Adjustment"

section).

4) This appliance is Listed for bedroom

installations when used with a listed Millivolt

Thermostat. Some areas may have further

requirements, check local codes before

installation.

5) The P33 Sunrise™ Gas Fireplace is approved

for alcove installations, see "Clearances"

section for details.

6) We recommend that you plan your installation

on paper using exact measurements for

clearances and floor protection before

actually installing this appliance. Have an

authorized inspector, dealer, or installer

review your plans before installation.

Note: For vent terminations refer to

"ExteriorVent TerminationLocations"

section.

10 Regency P33 Sunrise™ Gas Fireplace

INSTALLATION

Caution Requirements

The top, back and sides of the ﬁreplace are deﬁned by

standoffs. The metal ends of the standoff may NOT be

recessed into combustible construction.

WARNING

Fire hazard is an extreme risk

if these clearances (air space) to combustible materials are not

adhered to. It is of greatest importance that this ﬁreplace and vent

system be installed only in accordance with these instructions.

CLEARANCES

The clearances listed below are Minimum distances unless otherwise stated:

Amajorcause of chimney relatedﬁresis failure to maintainrequiredclearances (air space) tocombustiblematerials. It isofthe greatest importance

that this ﬁreplace and vent system be installed only in accordance with these instructions.

Clearance: Dimension Measured From:

A: *Front Floor Clearance (min.) 1" (25mm) Underside of Unit

B: *Sidewall (on one side) 7-1/2" (241mm) Side of Unit

C: *Ceiling

(room and/or alcove) 30" (889mm) Top of Unit

D: Alcove Width 48" (1219mm) Sidewall to Sidewall (Minimum)

E: Alcove Depth 36" (914mm) Front to Back Wall (Maximum)

F: Max. mantel depth 12" (305mm)

Close to Ceiling

Flue Clearances

Horizontal - Top 2-1/2"

Horiztonal - Side 1-1/2"

Horiztonal - Bottom 1-1/2"

Vertical (Flex Vent) 1-1/2"

Vertical (Rigid) 1-1/4"

*Note: All measurements are from the top/side of the unit, not optional front.

Other manuals for Sunrise P33S-NG4

This manual suits for next models

Table of contents

Other Regency Indoor Fireplace manuals

Regency

Regency I31-3 Quick start guide

Regency

Regency Cascades I1500 Quick start guide

Regency

Regency City CP60E Quick start guide

Regency

Regency Horizon HZ40E-NG Quick start guide

Regency

Regency G51 Quick start guide

Regency

Regency I1200 Quick start guide

Regency

Regency Panorama P36D Quick start guide

Regency

Regency E18-NG Quick start guide

Regency

Regency City CV72E-NG11 Quick start guide

Regency

Regency Liberty L234 Series Quick start guide

Regency

Regency GFi750NG Quick start guide

Regency

Regency H2105 Service manual

Regency

Regency Panorama PG121 Quick start guide

Regency

Regency U20-NG User manual

Regency

Regency Excalibur P90 User manual

Regency

Regency Panorama P33CE Quick start guide

Regency

Regency Energy U31 User manual

Regency

Regency Gas Insert E33-LP1 User manual

Regency

Regency LIBERTY L900E-NG Quick start guide

Regency

Regency 944-072 User manual

Regency

Regency Liberty L900 Gas Fireplace L900-LP1 User manual

Regency

Regency I3100 Installation instructions

Regency

Regency IG35-NG Quick start guide

Regency

Regency City CB60E Series Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual