Regency E21-LP1 Quick start guide

WARNING:

If the information in these instructions are not followed exactly,

a ﬁ re or explosion may result causing property damage,

personal injury or loss of life.

FOR YOUR SAFETY

Do not store or use gasoline or other ﬂ ammable vapors and

liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualiﬁ ed

installer, service agency or the gas supplier.

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appliance

Do not touch any electrical switch:

do not use any phone in your

building.

Immediately call your gas supplier

from a neighbour's phone. Follow

the gas supplier's instructions.

If you cannot reach your gas

supplier, call the ﬁ re department.

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.

6988 Venture St., Delta, BC Canada, V4G 1H4

918-354a

MODELS: E21-NG1 Natural Gas E21-LP1 Propane

E21 Gas Insert

10/25/05

Owners &

Installation Manual

www.regency-ﬁ re.com

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

Regency E21 Gas Fireplace Insert

CONGRATULATIONS!

You are the owner of a state-of-the-art Gas Insert by:

FPI

FIREPLACE PRODUCTS INTERNATIONAL LTD.

The Regency Gas Fireplace Series

has been designed to provide you with all the warmth and charm

of a ﬁ replace, at the ﬂ ick of a switch. The models E21-NG1 and E21-LP1 of this series have been

approved by Warnock Hersey for safety. As it also b

ars our own mark, it promises to provide you with

economy, comfort and security for many trouble free years to follow. Please take a moment now to

acquaint yourself with these instructions and the many features of your Regency Fireplace.

Regency E21 Gas Fireplace Insert

E21 GAS INSERT

TABLE OF CONTENTS

OPERATING INSTRUCTIONS

Operating Instructions

.................................................

Lighting Procedure

......................................................

Shutdown Procedure

...................................................

First Fire

......................................................................

Copy of Lighting Plate Instructions

..............................

Automatic Convection Fan Operation

.........................

Normal Operating Sounds of Gas Appliances

.............

MAINTENANCE

Maintenance Instructions

............................................

Log Replacement

........................................................

Glass Gasket

...............................................................

Gold-Plated Trim

.........................................................

Door Glass Replacement

............................................

Removing and Replacing Valve Assembly

..................

Removing and Replacing the Fan

...............................

PARTS

Parts List

.....................................................................

WARRANTY

Warranty

......................................................................

SAFETY LABEL

Safety Label

..................................................................

INSTALLATION INSTRUCTIONS

Before You

tart

............................................................

General Safety Information

...........................................

Policy for Factory Built Fireplaces

.................................

Installation Checklist

......................................................

Minimum Fireplace Clearances

.....................................

Clearances to Combustibles

.........................................

Gas Connection

.............................................................

System Data

..................................................................

High

levation

...............................................................

Wiring

iagram

..............................................................

Flue Connector Installation

............................................

Offset Flue Adaptor

.....................................................

Venting

........................................................................

Combustion & Ventilation Air

.......................................

Combustion & Ventilation Air .......................................Combustion & Ventilation Air

Gas Pressure Test

.......................................................

Aeration

ystem

..........................................................

Test for

lue

pillage

...................................................

Optional Brick Panel

...................................................

Log Set Installation

......................................................

Faceplate & Trim

.........................................................

Flush Glass

.................................................................

Flush Louvers

..............................................................

Bay Front

.....................................................................

Bay Louvers

................................................................

Conversion Kit from Natural Gas to Propane

..............

Full Screen Front

.........................................................

Remote Control

...........................................................

Remote Wall Switch

....................................................

Wall Thermostat

..........................................................

Final Check

.................................................................

Page Page

Regency E21 Gas Fireplace Insert

SAFETY LABEL

This is a copy of the label that accompanies

each Regency Gas Insert. We have printed

a copy of the contents here for your review.

The safety label is located on the front inside

base of the unit visible when the bottom louver

is open.

Note: Regency units are constantly being

improved. Check the label on the unit

and if there is a difference, the label

on the unit is the correct one.

Please note that with the addition

of thermostat control and outside

combustion air supply, this unit is

approved for bedroom installations.

For the State of Massachusetts, installation

and repair must be done by a plumber or

gasﬁ tter licensed in the Commonwealth of

Massachusetts.

For the State of Massachusetts, ﬂ exible

connectors shall not exceed 36 inches in

length.

For the State of Massachusetts, the appli-

ances individual manual shut-off must be a

t-handle type valve.

Listed:

VENTED

GAS

FIREPLACE

HEATER

Tested

to:

ANSI

Z21.88b-2003/CSA-2.33b-2003,

CGA

2.17-M91

Gas

fired

appliance

for

use

high

altitude.

Certified

for/Certifee

pour:

CANADA

and

U.S.A.

Report

No.

476-1428-00

(DEC.

2000)

Model/

Modele:

NOT

REMOVE

THIS

LABEL/

PAS

ENLEVER

CETTE

ÉTIQUETTE

276

Serial

No./

Serie

918-355a

Minimum

Clearances

Combustibles/

Degagement

Minimum

Des

Materiaux

Combustibles:

Side

unit

wall

Cote:

9"/229mm

Top

unit

mantle

dessus:

14"/355mm

MADE

CANADA

FABRIQUE

CANADA

FPI

Fireplace

Products

International

Ltd.,

Delta,

B.C.,

Canada

FIREPLACE

INSERT:

E21-NG1

E21-LP1

APPAREIL

FONCTIONNANT

CONCU

POUR

Natural

Gas

(Naturel

Gaz)

Propan

ETRE

INSERE

DANS

FOYER

Minimum

supply

pressure

5.0"

WC/C.E.

(1.25

kPa)

12.0"

WC/C.E.

(2.99

kPa)

Pression

d’alimentation

minimum

Manifold

pressure

high

3.8"

WC/C.E.

(0.95

kPa)

11.0"

WC/C.E.

(2.74

kPa)

Pression

tublure

d'échappement

élevée

Manifold

pressure

low

1.1"

WC/C.E.

(0.27

kPa)

2.9"

WC/C.E.

(0.72

kPa)

Pression

tublure

d'échappement

basse

Altitude

0-2000

ft.

2000

4500

ft.

0-4500

ft.

L'altitude

610m)

(610

1372m)

(0-1372m)

Orifice

size

DMS

Grandeur

l’injecteur

Maximum

input

23,500

Btu/h

22,000

Btu/h

22,500

Btu/h

Debit

calorifique

maximum

Minimum

input

11,750

Btu/h

11,000

Btu/h

11,250

Btu/h

Debit

calorifique

minimum

Duplicate

Serial

No.

NOT

FOR

USE

WITH

SOLID

FUEL.

PAS

UTILISER

AVEC

COMBUSTIBLE

SOLIDE.

For

installation

into

vented

non-combustible

fire-

place,

listed

factory

built

fireplace.

This

vented

gas

fireplace

heater

not

for

use

with

air

filters.

peut

etre

installe

que

dans

foyer

non

combustible

muni

d'un

event.

pas

utiliser

filtre

air

avec

foyer

gaz

vacuation.

WARNING

: This fireplace has been converted

for

use

with

gas

fireplace

insert

only

and

cannot

used

for

burning

wood

solid

fuels

unless

all

original

parts

have

been

replaced,

and

the

fireplace

re-approved

the

authority

having

jurisdiction.ELECTRICAL

SUPPLY/ALIMENTATION

ELECTRIQUE:115V60HZ

less

than/Moins

AMP.

E21-NG1

E21-LP1

276

Regency E21 Gas Fireplace Insert

IMPORTANT:

SAVE THESE

INSTRUCTIONS

The Regency Gas Fireplace must be installed

in accordance with these instructions. Carefully

read all the instructions in this manual ﬁ rst.

Consult the "authority having jurisdiction" to

determine the need for a permit prior to start-

ing the installation. It is the responsibility of the

installer to ensure this ﬁ replace is installed in

compliance with the manufacturer's instructions

and all applicable codes.

BEFORE YOU START

Safe installation and operation of this appli-

ance requires common sense, however, we

are required by the Canadian Safety Standards

and ANSI Standards to make you aware of the

following:

INSTALLATION

YOUNG CHILDREN SHOULD BE

CAREFULLY SUPERVISED WHEN

THEY ARE IN THE SAME ROOM

AS THE APPLIANCE.

CLOTHING OR OTHER

FLAMMABLE MATERIAL SHOULD

NOT BE PLACED ON OR NEAR

THE APPLIANCE.

INSTALLATION AND REPAIR

SHOULD BE DONE BY A

QUALIFIED SERVICE PERSON.

THE APPLIANCE SHOULD

BE INSPECTED BEFORE USE

AND AT LEAST ANNUALLY BY

A PROFESSIONAL SERVICE

PERSON. MORE FREQUENT

CLEANING MAY BE REQUIRED

DUE TO EXCESSIVE LINT FROM

CARPETING, BEDDING MATERIAL,

ETC. IT IS IMPERATIVE THAT

CONTROL COMPARTMENTS,

BURNERS AND CIRCULATING

AIR PASSAGEWAYS OF THE

APPLIANCE BE KEPT CLEAN.

DUE TO HIGH TEMPERATURES,

THE APPLIANCE SHOULD BE

LOCATED OUT OF TRAFFIC AND

AWAY FROM FURNITURE AND

DRAPERIES.

WARNING: FAILURE TO INSTALL

THIS APPLIANCE CORRECTLY

WILL VOID YOUR WARRANTY AND

MAY CAUSE A SERIOUS HOUSE

FIRE.

CHILDREN AND ADULTS SHOULD

BE ALERTED TO THE HAZARDS OF

HIGH SURFACE TEMPERATURES,

ESPECIALLY THE FIREPLACE

GLASS, AND SHOULD STAY AWAY

TO AVOID BURNS OR CLOTHING

IGNITION.

GENERAL SAFETY

INFORMATION

The appliance installation must conform

with local codes or, in the absence of local

codes, with the current Canadian or National

Gas Codes, CAN1-B149 or ANSI Z223.1

Installation Codes.

The appliance when installed, must be

electrically grounded in accordance with

local codes, or in the absence of local codes

with the current National Electrical Code,

ANSI/NFPA 70 or CSA C22.1 Canadian

Electrical Code.

See general construction and assembly

instructions. The appliance and vent should

be enclosed.

This appliance must be connected to the

speciﬁ ed vent and termination cap to the

outside of the building envelope. Never

vent to another room or inside a building.

Make sure that the vent is installed as per

Venting instructions.

This appliance may only be installed in a

vented, solid fuel burning masonry, listed

factory built ﬁ replace, or zero clearance kit

part # 530-936.

This appliance is Listed for bedroom

installations when used with a Listed Millivolt

Thermostat. Some areas may have further

requirements, check local codes before

installation.

This appliance is Listed for Alcove

installations, maintain minimum Alcove

clearances as follows, minimum ceiling

height of 53-1/2", minimum width of 48"

and a maximum depth of 36".

This unit is not approved for installation into

a mobile home.

Inspect the venting system annually for

blockage and any signs of deterioration.

10)

Any safety glass removed for servicing

must be replaced prior to operating the

appliance.

11)

To prevent injury, do not allow anyone who

is unfamiliar with the operation to use the

ﬁ replace

insert

12)

Wear gloves and safety glasses for protection

while doing required maintenance.

13)

Ensure adequate combustion and ventilation

air.

14)

Under no circumstances should this

appliance be modiﬁ ed. Parts that have to

be removed for servicing should be replaced

prior to operating this appliance.

15)

Installation and any repairs to this appliance

should be done by a qualiﬁ ed service person.

A professional service person should be

called to inspect this appliance annually.

Make it a practice to have all of your gas

appliances checked annually.

16)

Do not slam shut or strike the glass door.

17)

Under no circumstances should any solid

fuels (wood, paper, cardboard, coal, etc.)

be used in this appliance.

18)

The appliance area must be kept clear and

free of combustible materials, (gases and

other ﬂ ammable vapours and liquids).

19)

Do not use this appliance if any part has been

under water. Immediately call a qualiﬁ ed

service technician to inspect the appliance

and to replace any part of the electrical

control system and any gas control which

has been under water.

20)

WARNING: Failure to position

the parts in accordance with the

diagrams in this manual or failure to

use only parts speciﬁ cally approved

with this appliance may result

in property damage or personal

injury.

21)

WARNING: Operation of this

appliance when not connected to

a properly installed and maintained

venting system or tampering with

the blocked vent shut-off system

can result in carbon monoxide (CO)

poisoning and possible death.

Emissions from burning wood or gas could

contain chemicals known to the State of

California to cause cancer, birth defects or

other reproductive harm.

Regency E21 Gas Fireplace Insert

INSTALLATION

POLICY FOR SOLID

FUEL BURNING &

FACTORY BUILT

FIREPLACES

The Regency E21 may be installed and vented

into any solid fuel ﬁ replace that has been installed

in accordance with the National, Provincial and

local building codes and is constructed of non-

combustible materials.

1) Installer must mechanically attach the sup-

plied label to the inside of the ﬁ rebox of the

ﬁ replace into which the gas ﬁ replace insert

is installed.

2) Do not cut any sheet-metal parts of the

ﬁ replace, in which the gas ﬁ replace insert

is to be installed.

3) If the factory-built ﬁ replace has no gas access

hole(s) provided, an access hole of 1-1/2"

(37.5mm) or less may be drilled though the

lower sides or bottom of the ﬁ rebox in a proper

workmanship like manner. This access hole

must be plugged with a non-combustible

insulation after the gas supply line has been

installed.

4) The ﬁ replace ﬂ ue damper can be fully blocked

open or removed for installation of the gas

ﬁ replace insert.

5) The ﬁ replace and ﬁ replace chimney must

be clean and in good working order and

constructed of non-combustible materials.

6) The chimney cleanouts must ﬁ t properly.

7) Refractory (ﬁ rebricks), glass doors, screen

rails, screen mesh and log grates can be

removed from the ﬁ replace before installing

the gas ﬁ replace insert.

8) Smoke shelves, shields and bafﬂ es may be

removed if attached by mechanical fasteners.

If any part is removed it must not weaken

the structural integrity of the factory built.

9) Trim panels or surrounds shall not seal

ventilation openings in the ﬁ replace.

MINIMUM FIREPLACE

CLEARANCES

Diagram shows the minimum ﬁ replace opening

required to be able to install the Regency gas

ﬁ replace insert.

INSTALLATION

CHECKLIST

Locate appliance, check Clearances to

Combustibles, page 7.

Make gas and electrical connections, page

8. Test the pilot. Must be as per diagram,

page 11.

Install Flue Connector, page 9.

Install vent, page 10.

Test Gas pressure, page 10, and check

aeration, page 11.

Test for ﬂ ue spillage, page 11.

Install brick panels (optional), page 11.

Install log set, page 11.

Install Faceplate and Trim, page 12.

10)

Install Flush Door Front (Standard), page

13.

11)

Install Optional Bay Front and optional Bay

Gold Trim, page 14.

12)

Install Louvers (Flush or Bay), pages 13 and

14.

13)

Install optional Wall Switch, Remote Control,

or Wall Thermostat, page 19.

14)

Final check, page 20.

Before leaving this unit with the customer,

the installer must ensure that the appliance is

ﬁ ring correctly and operation fully explained to

customer.

This includes:

Clocking the appliance to ensure the correct

ﬁ ring rate (rate noted on label) after burning

appliance for 15 minutes.

If required, adjusting the primary air to ensure

that the ﬂ ame does not carbon. First allow

the unit to burn for 15-20 min. to stabilize.

Ensure that the appliance is venting

correctly.

CAUTION: Any alteration to the product that

causes sooting or carboning that results

in damage is not the responsibility of the

manufacturer.

Note: If you are installing the Molded Faceplate,

the minimum fireplace dimensions are as

follows:

Width (at front):

29-1/8" (740mm)

Depth:

15" (381mm)

Height:

18-5/8" (473mm)

WARNING

: This ﬁ replace has been converted

for use with a gas ﬁ replace insert only and

cannot be used for burning wood or solid fuels

unless all original parts have been replaced,

and the ﬁ replace re-approved by the authority

having jurisdiction."

Regency E21 Gas Fireplace Insert

CLEARANCES TO

COMBUSTIBLES

INSTALLATION

The minimum clearance from the side of the appliance to a combustible

side wall is 9 inches (229mm). The minimum clearance from the top of

the louver to a combustible mantel is

14 inches (356mm)

. The minimum

height from the top of the louver to the ceiling is

36 inches (914mm)

See diagram.

Note: A non-combustible mantel may be installed at a lower height

if the framing is made of metal studs covered with a non-

combustible board.

Regency E21 Gas Fireplace Insert

HIGH ELEVATION

This unit is approved in Canada for altitude

0 to 4500 ft. (CAN/CGA 2.17-M91) with the

oriﬁ ce supplied.

System Data

For altitude: Natural Gas 0-2000 ft.

Propane: 0-4500 ft.

Burner Inlet Oriﬁ ce Sizes:

Natural Gas Propane

Burner #43 #54

Max. Input Rating

- Natural Gas 23,500 Btu/h

- Propane 22,500 Btu/h

Min. Input Rating

Natural Gas

- Natural Gas-

+/-5% 11,750 Btu/h

-Propane +/-5% 11,250 Btu/h

Supply Pressure

Natural Gas min. 5.0" w.c.

Propane min. 12.0" w.c.

Manifold Pressure (High)

Natural Gas 3.8" +/- 0.2" w.c.

Propane 11" +/- 0.2" w.c.

Circulation Fan:

120 VAC, 60 Hz

Variable Speed:

127 CFM, thermally

activated

NATURAL GAS E21-NG1

For alti

tude: 2000 ft - 4500 ft.

Burner Inlet Oriﬁ ce Size:

44 DMS

Max. Input Rating

22,000 Btu/h

Min. Input Rating

+/-5%

11,000 Btu/h

INSTALLATION

GAS CONNECTION

Only persons licensed to work with gas piping

may make the necessary gas connections to

this appliance.

The gas connection is a 3/8" NPT accessible on

the left side of the unit. The gas line connection

may be made of rigid pipe, copper pipe or an

approved ﬂ ex connector. (If you are using rigid

pipe, ensure that the valve can be removed

for servicing.) Since some municipalities have

additional local codes it is always best to consult

with your local authorities and the CAN/CGA

B149 installation code.

For USA installations follow local codes and/or

the current National Fuel Gas Code, ANSI

Z223.1.

When using copper or ﬂ ex connectors use only

approved ﬁ ttings. Always provide a union so that

gas lines can be easily disconnected for burner

or fan servicing. Flare nuts for copper lines and

ﬂ ex connectors are usually considered to meet

this requirement.

Important: Always check for gas leaks

with a soap and water solution or gas

leak detector. Do not use open ﬂ ame

for leak testing.

For minimum and maximum supply pressure

see the System Data table.

If the appliance is to be installed into an

existing chimney system, thoroughly clean

the masonry ﬁ replace that has been chosen

for the Regency Gas Fireplace.

The appliance is provided with an opening on

the left hand side of the control compartment

for the gas line.

Note: During any pressure testing of the gas

supply piping system that exceeds test pressures

of 1/2 psig, this appliance and its individual

shut-off valve must be disconnected from the

piping system. If test pressures equal to or less

than 1/2 psig are used then this appliance must

be isolated from the piping system by closing

its individual manual shut-off valve during the

testing.

CAUTION: If the glass is removed for

servicing, it must be replaced prior to

operating the appliance. The glass must

be fixed in the closed position when

operating.

Regency E21 Gas Fireplace Insert

Note: Do not operate unit if ﬂ ue connector is not

fastened in original position.

WIRING DIAGRAM FOR THE E21-NG1 AND E21-LP1

INSTALLATION

CAUTION: Label all wires prior

to disconnection when servicing

controls. Wiring errors can

cause improper and dangerous

operation.

WARNING: Electrical Grounding

Instructions

This appliance is equipped with a

three pronged (grounding) plug for

your protection against shock hazard

and should be plugged directly into

a properly grounded three-prong

receptacle. Do not cut or remove the

grounding prong from this plug.

This heater does not require a 120V A.C. supply

for operation. In case of a power failure, the

burner switch and the optional remote control/

thermostat will continue to operate. However,

a 120V A.C. power supply is needed for the

fan/blower operation.

Caution: Ensure that the wires do

not touch any hot surfaces and are

away from sharp edges.

When connected with 120 volts, the appliance

must be electrically grounded in accordance

with local codes or, in the absence of local

codes the current CSA C22.1 (in Canada) or

with the National Electrical Code ANSI/NFPA

70-1987 (in USA).

NOTE: This unit is equipped with a heat

sensor thermodisc which will

prevent the blower from operating

until the unit reaches the correct

temperature.

Green

Ground

Neutral

Live

Black

RedBlack

Fan

Thermodisc

ON OFF

Rotary Speed

Control

120V AC

60 Hz

Ground Fan

Grounding

Lug Detail

Lockwasher Fan ground

Power cord

ground wire

Star washer

Nut

#8 Ground Lug

Star washer

Gas Pilot

Thermopile

Electrode

Gas

Piezo

Ignitor

Thermocouple In

Brown

Red

White

Pilot

Assembly

"S.I.T" Valve

Vent Spill

Switch

(Auto Reset)

Burner

OFF

Remote Transmitter

(Optional)

Thermostat

(Millivolt)

(Optional)

Remote

Receiver

(Optional)

(Millivolt)

ONOFF

Regency

Black

Red

FLUE CONNECTOR INSTALLATION

Remove the screw holding the ﬂ ue connector

plate to the appliance.

Slide the plate out and attach to

the ﬂ ue liner inside the ﬁ replace

to the ﬂ ue collar with three sheet

metal screws.

Place the appliance on the hearth.

Push the appliance into the ﬁ re-

place and at the same time slide the

plate back onto the appliance.

Replace the screw holding the plate just

before completely pushing the appliance into

the ﬁ replace.

Regency E21 Gas Fireplace Insert

INSTALLATION

GAS PIPE

PRESSURE TESTING

The appliance must be isolated from the gas

supply piping system by closing its individual

manual shut-off valve during any pressure

testing of the gas supply piping system at test

pressures equal to or less than 1/2 psig. (3.45

kPa). Disconnect piping from valve at pressures

over 1/2 psig.

The manifold pressure is controlled by a regulator

built into the gas control, and should be checked

at the pressure test point.

Note: To properly check gas pressure, both

inlet and manifold pressures should

be checked using the valve pressure

ports on the valve.

Make sure the valve is in the "OFF"

position.

Loosen the "IN" and/or "OUT" pressure

tap(s), turning counterclockwise with a 1/8"

wide ﬂ at screwdriver.

Attach manometer to "IN" and/or "OUT"

pressure tap(s) using a 5/16" ID hose.

Light the pilot and turn the valve to "ON"

position. Read manometer.

The pressure check should be carried out

with the unit burning and the setting should

be within the limits speciﬁ ed on the safety

label.

When ﬁ nished reading manometer, turn

off the gas valve, disconnect the hose and

tighten the screw (clockwise) with a 1/8"

ﬂ at screwdriver.

Note: Screw should be

snug, but do not over tighten

OFFSET FLUE

ADAPTOR

A Offset Flue Adaptor Kit,

Part #532-920

available as an accessory to move the ﬂ ue

outlet back for easier liner installations in deep

ﬁ replaces.

VENTING

THE APPLIANCE MUST NOT BE

CONNECTED TO A CHIMNEY FLUE

SERVING A SEPARATE SOLID FUEL

BURNING APPLIANCE.

This appliance is designed to attach to a 4"

diameter type B-Vent or double thickness

approved aluminium ﬂ ex liner.

The ﬂ ue collar of the appliance will ﬁ t inside

a standard vent and may be fastened directly

to the vent by sheet metal screw or a B-Vent,

single wall vent connector.

B-Vent chimneys require a 1" clearance to

combustibles.

A 3" diameter type B-Vent or approved aluminium

ﬂ ex liner may also be used with a 4" to 3" reduc-

ing adapter. Consult venting charts and local

code requirements.

The Regency Insert incorporates its own internal

draft hood, so no additional external draft hood

is required. Check periodically that the vent is

unrestricted and an adequate draft is present

when the unit is in operation.

Before installing the vent system ensure that the

damper plate is locked into the open position

and secure to prevent the damper plate from

falling down and crushing the liner.

The appliance is equipped with a vent safety

shutoff system and a safety control system

designed to protect against improper venting

of combustion products. The appliance will not

function without being connected to a proper

system.

WARNING: Operation of this heater

when not connected to a properly

installed and maintained venting

system or tampering with the vent

shut-off system can result in carbon

monoxide (CO) poisoning and

possible death.

This appliance must not be connected to a

chimney ﬂ ue serving a separate solid fuel burn-

ing appliance.

For best venting performance, we

recommend

the following venting rules:

Use only certiﬁ ed Type B gas vent or

approved ﬂ ex liner.

Follow the vent manufacturer's instructions

and clearance requirements.

Observe any local code restrictions, if any,

regarding the installation of gas inserts.

Use as few elbows as possible.

Keep horizontal lengths as short as possible

and maintain at least an upward slope of

1/4 in. (6.4mm) for every 12 in. (305mm) of

horizontal run.

Terminate the vent with a suitable certiﬁ ed

vent cap.

COMBUSTION AND

VENTILATION AIR

WARNING: This appliance needs fresh air

for safe operation and must be installed

with provisions for adequate combustion

and ventilation air available to the room in

which it is to be operating.

Follow CAN/CGA B149 (in Canada) or ANSI

Z223.1 (in the USA) requirements, and any

local codes or regulations of the enforcing

authority.

Air for combustion is drawn in through the front

of the unit, therefore, the front of the unit must

be kept clear of any obstructions.

This manual suits for next models

Table of contents

Other Regency Indoor Fireplace manuals

Regency

Regency P33S-NG Quick start guide

Regency

Regency Panorama P33E-NG11 User manual

Regency

Regency Cascades I2500 User manual

Regency

Regency PG36NG5-R Quick start guide

Regency

Regency Sunrise U32SE-NG5 Quick start guide

Regency

Regency Horizon HZ42STEPV Quick start guide

Regency

Regency Greenfire GF1500NG Quick start guide

Regency

Regency P33CE-NG Quick start guide

Regency

Regency GF900C-NG1 Quick start guide

Regency

Regency B41XTCE-NG11 User manual

Regency

Regency City CST60E Quick start guide

Regency

Regency P36-LP10 Quick start guide

Regency

Regency Horizon HZ42ST-NG Quick start guide

Regency

Regency PG121-NG Quick start guide

Regency

Regency GF900L-NG Quick start guide

Regency

Regency bellavista b41xte User manual

Regency

Regency Bellerive I200B-1 User manual

Regency

Regency Greenfire GF900L Quick start guide

Regency

Regency L390PB Quick start guide

Regency

Regency 944-072 User manual

Regency

Regency P121-NG2 User manual

Regency

Regency U31-NG10 Quick start guide

Regency

Regency Horizon HZ30E-NG Quick start guide

Regency

Regency L234-NG10 Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual